- Trusted Seller
Haas ST-20 CNC Lathe
used
- Manufacturer: Haas
- Model: ST-20
- Spindle Nose: A2-6
Imperial Metric Country: United States | Swing over bed: 20" | Max cutting diameter: 10.3 | Max cutting length: 20" | Bar capacity: 2" | Turret: 12 Station BOT/VDI | Spindle speed: 4000 RPM | Spindle motor: 20 HP...
Elk Grove Village, IL - Trusted Seller
Elk Grove Village, IL - Trusted Seller
Doosan Dooturn 4 CNC Lathe
used
- Manufacturer: Doosan
- Model: DOOTURN 4
- Spindle Bore: - 3"
Imperial Metric Turning length - 22" Turning - 9.45 Above the bed - 1.8" Above transversing slide - 17.7" Length between centers - 17.7" X-axis - 7.87" Z-axis - 17.7" Turning speed - 3500 rpm
Elk Grove Village, IL 
18" x 84" Lodge & Shipley BLUE CHIP 18 Geared Head Gap Bed Engine Lathe
used
- Manufacturer: Lodge & Shipley
18" Lodge & Shipley Geared head Gap bed engine lathe Swing / in Gap: 18" / 34" Diameter Length of Bed (LOB): 96" Distance between Centers (B.C.): 84" Model #: Blue Chip 18 12" 3 jaw chuck Spindle thru hole Diamet...
- Trusted Seller
1995 MAZAK PMNX-1600 #0207223
used
- Manufacturer: Mazak
- Spindle Bore: 12.500"
Max turning diameter: 39.370" | Max swing over bed: 42" | Max cutting length: 62" | Spindle bore: 12.500" | Spindle motor: 60 HP | Spindle speed: 500 | Chuck size: 48" | X axis travel: 22.50" | Z axis travel: 44...
Toledo, OH - Trusted Seller
Waldrich Siegen DH 1600/35 x 12000 CNC Turbine Shaft / Roll Lathe
used
- Manufacturer: Waldrich Siegen
NEW Siemens CNC Control System Retrofit: 2021 | Between centers: 12,000 mm | Capacity between centers: 35 Ton | Swing over slide: 1,600 mm | Chuck diameter: 1,200 mm | Tailstock diameter: 360 mm | Power at main s...
Marietta, GA - Trusted Seller
1997 BRIDGEPORT ROMI EZ PATH II CNC #0550525
used
- Manufacturer: Bridgeport Romi
- Distance between Centers: 40"
TAILSTOCK DORIAN TOOL POST 3-JAW CHUCK Swing over bed: 20" | Swing over cross slide: 10" | Distance between centers: 40" | Chuck size: 10" | Minimum spindle rpm: 4 | Maximum spindle rpm: 3,500 | Spindle speeds: 3...
Toledo, OH - Trusted Seller
1999 BRIDGEPORT ROMI SD CNC #0550625
used
- Manufacturer: Bridgeport Romi
- Spindle Bore: 2.08"
- Distance between Centers: 40"
Maximum swing over ways: 17" | Maximum swing over cross slide: 8" | Chuck size: 8" | Maximum distance between centers: 40" | X-axis travel: 8.6" | Z-axis travel: 40" | X-axis rapid traverse [inch/min]: 295 | Z-a...
Toledo, OH - Trusted Seller
2017 TONG TAI SEIKI TOPPER 2017 #0312823
used
- Manufacturer: Tongtai
- Spindle Nose: A2-6
Mfg; Tong Tai All Specifications Subject to Buyer Verification Run Time Hours as of 2023 -- subject to change
Toledo, OH - Trusted Seller
2005 HAAS SL-30T
used
- Manufacturer: Haas
- Model: SL-30T
- Spindle Bore: 3.5"
- Distance between Centers: 39"
Haas SL-30T CNC Turning Center, Haas CNC Control, 12" 3-Jaw Chuck, 30" Swing, 39" Between Centers, 3.5" Spindle Bore, 30 HP, 3400 RPM, 12-Position Turret, Tool Setter, Chip Conveyor & Coolant System, New 2005. Ha...
Cincinnati, OH - Trusted Seller
1969 LOGAN 7525
used
- Manufacturer: Logan
14-1/2" SWING OVER BED BED WAYS ARE EXCELLENT SEE ATTACHED PICTURES 28-1/2" FROM SPINDLE FACE TO TURRET FACE 5 C COLLET CLOSER ON SPINDLE 2 SPEED MOTOR AC MOTOR DRIVEN VARIABLE SPEED DRIVE 225 - 2250 RPM SPINDLE ...
Cleveland, OH - Trusted Seller
2018 HAAS TL1 CNC Lathe ()
used
- Manufacturer: Haas
- Model: TL-1
Imperial Metric HAAS TL1 CNC Lathe (2012) Swing Diameter S.A.E METRIC Over Front Apron 20.0 in 508 mm Over Cross Slide 11.0 in 279 mm Capacities S.A.E METRIC Chuck (optional) 8.0 in 203 mm Max Cutting Diameter (w...
Elk Grove Village, IL - Trusted Seller
Hardinge DSM-59 Speed Lathe
used
- Manufacturer: Hardinge
- Model: DSM 59
Imperial Metric Country: United States
Elk Grove Village, IL - Trusted Seller
1971 Hardinge Model HLV-H Precision Tool Makers Lathe - LMC #51506
used
- Manufacturer: Hardinge
- Model: HLV-H
- Distance between Centers: 18"
Year Built - 1971 Rebuilt by Iverson - 2022* Serial No. HLV-H-4842 Motor driven with 2-Speed, 3Ph/60Hz/460 volt variable speed drive unit with direct reading spindle speed indicator and controls. Hardinge Super-P...
Lincolnshire, IL - Trusted Seller
1998 MICRKINETICS TURNMASTER PRO
used
- Manufacturer: MICRKINETICS
specifications from website should be verified Swing over bed 3.50" 4.75" 6.75" Swing over carriage 1.75" 3.0" 5.0" Distance between centers 8.00" 17.00" 17.00" Cross Slide Travel 2.25" 4.25" 4.25" Tail stock sp...
Cleveland, OH 
Clausing 1340 Lathe
used
- Manufacturer: Clausing
- Model: 1340
- Distance between Centers: 40 available
Good condition Clausing 1340 Lathes. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
