Building Filters

Used Pagus Lathes

Trusted Seller
Pagus - Your machine trade for used machinery and equipment
- Manufacturer: Pagus
Faceplate WMW ROTO RECORD Ø 500 mm 8x Slotted Holes: Ø 19.5 mm, Length: 90 mm 4x Slotted Holes: Ø 19.5 mm, Length: 100 mm with one-piece reversing jaws Machine side: Mounting ring: Diameter: Ø 217 / 191 mm, Width...
Zschepplin, Germany
Trusted Seller
Pagus - Your machine trade for used machinery and equipment
- Manufacturer: Pagus
Faceplate WMW Ø 483 mm Bore: Ø 105 mm, length: 40 mm with internal thread: M105 x 6.0, length: 35 mm 8x slotted hole: Ø 19.5 mm, length: 75 mm 4x slotted hole: Ø 19.5 mm, length: 95 mm with one-piece reversible j...
Zschepplin, Germany
Trusted Seller
PAGUS lathe chuck
- Manufacturer: Pagus
3-jaw chuck, three-jaw chuck PAGUS Outer Ø: 200mm Flange: 155 mm | Bolt circle: 174 mm | Height with jaws: 100 mm | Bore: 55 mm | Square for key: 11.5 mm | Dimensions: 200 x 100 mm
$210 USD
Zschepplin, Germany
Trusted Seller
PAGUS lathe chuck
- Manufacturer: Pagus
3-jaw chuck, three-jaw chuck PAGUS with second set of jaws ! used, tested !
$1,459 USD
Zschepplin, Germany
Trusted Seller
PAGUS lathe chuck
- Manufacturer: Pagus
3-Jaw Chuck, Three-Jaw Chuck with External Jaws PAGUS Short Taper with 3 Additional External Jaws with Wrench Used, Tested!
$303 USD
Zschepplin, Germany
Trusted Seller
PAGUS lathe chuck
- Manufacturer: Pagus
3-jaw chuck, three-jaw chuck PAGUS Outside ø: 250 mm | Bolt circle ø (chuck): 230 mm | Bore ø: 80 mm | Height with jaws: 140 mm | Dimensions: 250 x 250 x 140 mm
$210 USD
Zschepplin, Germany
Trusted Seller
PAGUS lathe chuck
- Manufacturer: Pagus
3-jaw chuck, three-jaw chuck PAGUS Was used on a Toyoda HES52 with many accessories ! used, checked !
$793 USD
Zschepplin, Germany
Trusted Seller
PAGUS rotary table for lathe chuck
- Manufacturer: Pagus
Rotary table for lathe chuck PAGUS 360 ° rotatable Used!
$263 USD
Zschepplin, Germany
Trusted Seller
PAGUS faceplate
- Manufacturer: Pagus
Faceplate PAGUS Bore Ø: 61 /70 mm, with thread, pitch: 6.0 mm used, checked!
$257 USD
Zschepplin, Germany
Trusted Seller
PAGUS faceplate
- Manufacturer: Pagus
Face plate, clamping plate PAGUS 4x threaded hole: M16 x 2.0, depth: 30 mm used, checked!
$490 USD
Zschepplin, Germany
Trusted Seller
PAGUS faceplate
- Manufacturer: Pagus
Faceplate PAGUS / WMW 4x threaded hole: M12 x 1.75, depth: 25 mm 1x bore: Ø 19 mm, depth: 8 mm Cone: Ø 103 /106 mm, depth: 15 mm used, checked!
$443 USD
Zschepplin, Germany
Trusted Seller
PAGUS face plate
- Manufacturer: Pagus
faceplate PAGUS combinable with WZ239! Outer ø: 305 mm | Bolt circle ø: 280 mm | Bolt circle flange ø: 52/135 mm | Bore ø: 25 mm | Thickness: 38 mm | Grooves: 10/18 mm | Dimensions: 305 x 305 x 38 mm
$257 USD
Zschepplin, Germany
Trusted Seller
PAGUS face plate
- Manufacturer: Pagus
faceplate PAGUS Used! Outer ø: 300 mm | Bolt circle ø: 102.5 mm | Height with jaws: 120 mm | Bore ø: 60 mm | Slotted holes: Ø 15 x 60 mm | Dimensions: 300 x 300 x 120 mm
$373 USD
Zschepplin, Germany
Trusted Seller
PAGUS face plate
- Manufacturer: Pagus
Faceplate PAGUS used, tested ! Outside ø: 630 mm | Hole circle ø: 290 mm | Height with jaws: 185 mm | Bore ø: 62,5 mm | Long holes: Ø 21 x 120 / 150 mm | Dimensions: 630 x 630 x 190 mm
$1,120 USD
Zschepplin, Germany
Trusted Seller
PAGUS face plate
- Manufacturer: Pagus
Faceplate Pagus used, tested ! External ø: 900 mm | Hole circle ø: 235 mm | Bore ø: 150 mm | Flange ø: 300 mm | Dimensions: 900 x 900 x 300 mm
$1,459 USD
Zschepplin, Germany