Used Monarch Lathes

Steady Rest - Monarch Lathe

• Manufacturer: Monarch

Approx. swing 29", 6" Hole size, 12" Wide across base, 10.5" From top of V to far side of flat, 3 Available, One roller type other brass tips

1954 Monarch Lathe with 22.5in Swing

• Manufacturer: Monarch

This is a 1954 Monarch lathe equipped with a 22.5-inch swing. Manufactured by The Monarch Machine Tool Company, the unit features clearly marked feed and threading specifications on its mounted informational plat...

Monarch 22" x 120"

22" Swing, 120" Between centers, Taper attachment, D1-6 Mount 3 jaw chuck, Steady rest, New electrics, Full length chip catch pan, 40hp, More info coming soon

Monarch 20" x 96" Toolroom Lathe Series 60

• Manufacturer: Monarch
• Model: SERIES 60

Equipped with: 3 jaw chuck w/reversible jaws 4 way tool post Large capacity roller type steady rest Newall 2 axis DRO *Feeds are in millimeters* **Machine is USA built but shipped to Germany**

MONARCH 62 #0628822

• Manufacturer: Monarch
• Model: 62
• Spindle bore: 50.8 mm

3 Swing over ways: 18" | Swing over carriage: 12" | Distance between centers: 60" | Spindle speeds: 14 TO 1750 RPM | Spindle hole: 2" | Threads: 2 TO 120 TPI | Feeds: .0011 TO .0683 | Jaw chuck: 12" | Steady rest...

MONARCH T TYPE #1802720

• Manufacturer: Monarch
• Model: T TYPE

Retrofitted in 2010 EQUIPPED WITH: New Electric PLC in 2010 60" Face Plate w/Jaws Transformer 4-Way Tool Post Coolant

1956 MONARCH 27" x 144"

• Manufacturer: Monarch
• Spindle bore: 57.15 mm

SPINDLE SPEEDS 14 to 600 RPM SPINDLE BORE 2 1/4" MAIN MOTOR 25 HP 27" Swing x 144" center distance 18" CHUSHMAN 3 JAW CHUCK D1-8 MOUNT " SWING OVER CROSSLIDE 7" SQUARE4 WAY MC CROSKY TOOLPOST COOLANT THREAD DIAL...

1950 MONARCH 49"SWING X 84" CC

• Manufacturer: Monarch

12 SPINDLE SPEEDS 8 to 405 RPM THREAD CHANGES (48) 1/2 to 28 TPI 32" 4 Jaw Chuck Sony Digital Readout on Carriage Travel D1-11 Camlock Spindle 30 HP 220/440 Main Motor 48 Feeds .006 - .363 Thread Dial 32" Wide Be...

1957 MONARCH Series 60

• Manufacturer: Monarch
• Model: SERIES 60

ONE USED - 22” x 96”cc MONARCH Engine Lathe 22” Swing Over Bedways 14” Swing Over Cross Slide Hardways Taper Turning Attachment Inch Threading 2 1/8” Spindle thru Hole Spindle Speeds from 9.5 to 800 RPM 18” Diam...

1959 MONARCH Series 80

• Manufacturer: Monarch

ONE USED - 27”x 24’cc MONARCH Engine Lathe 27” Swing Over Bedways 17” Swing Over Cross Slide Hardways Taper Turning Attachment Inch Threading 3” Spindle thru Hole Spindle Speeds from 4 Way Power Rapid Traverse 2...

17"x60" Monarch Engine Lathe, 4-Jack Chuck, Tool Post, S/N 13562 ($10,500 OBO)

• Manufacturer: Monarch

“Used, very good condition; REFURBISHED 2025.” 17"x60" Table Size 4-jaw chuck Tool post S/N 13562 Swing: 17 inches over the bed Distance between centers: 60 inches Local deliveries available, simply message us be...

Monarch 22M Geared Head Engine Lathe 22” Swing 48” Centers 10HP 3PH

• Manufacturer: Monarch
• Phase type: Three-phase

“IN GOOD CONDITION.” Monarch 22M Geared Head Engine Lathe 22” Swing 48” Centers 10HP 3PH Monarch 22M Geared Head Engine Lathe 22” Swing 48” Centers 10HP 3PH The Monarch 22M Lathe is a heavy-duty geared head engin...