Used Feeler Lathes

Feeler #9392-P - Feeler Lathe #9392-P

• Manufacturer: Feeler

Feeler 11″ x 18″ Precision Toolroom Lathe, TL-61 Inventory # 9392-P

2004 Feeler FTL-618E Precision Toolroom Lathe - LMC #51430

• Manufacturer: Feeler

Year Built - 2004 Serial No. 8E109 SPECIFICATIONS: EQUIPPED WITH: Independent Electric Variable Power Feed Drive for Carriage and Cross Slide Carriage Control Left/Right Switch Forward/Reverse Brake Quick Change ...

11″ x 18″ Feeler FTL-618E #51430

• Manufacturer: Feeler

Year Built – 2004 Serial No. 8E109 SPECIFICATIONS: EQUIPPED WITH: Independent Electric Variable Power Feed Drive for Carriage and Cross Slide Carriage Control Left/Right Switch Forward/Reverse Brake Quick Change ...

FEELER FTS-27

• Manufacturer: Feeler
• Model: FTS-27

Feeler FTS-27 2nd Operation Lathe available. 9" swing over bed, 36" distance between centers, variable spindle speeds 230-3500 RPM, 5C collet capacity. Features a 6-station turret, lever collet closer, and includ...

FEELER 2ND OP LATHE USED

• Manufacturer: Feeler

SPECIFICATIONS SPINDLE CAPACITY GENERAL (SIMILAR TO HARDINGE DSM-59 AND DV-59)

FEELER DV-59

• Manufacturer: Feeler

FEELER Operation Lathe FTS-27 Used

• Manufacturer: Feeler
• Model: FTS-27

Hartdinge Knock Off 220 Volt 3 PH 2.0/1.0 HP Date: 4.85 Tested Good With Tooling Dimensions: 68" x 31" x 61" Weight: 1,256 lbs Expedited shipping services are available This piece is located at Ideal Machiner...

FEELER LATHE 220V 3 PHASE USED

• Manufacturer: Feeler
• Model: FSM-59

Machine is good working condition. This is a "2nd op" lathe, not equipped with feed threading capabilities. IMPORTANT CONDITIONS OF THIS QUOTATION: All relevant facts about the above machinery are believed to be ...

Feeler #9372 - Feeler FTS-27 Lathe #9372

• Manufacturer: Feeler

Feeler 9″ x 36″ Second Operation Lathe, FTS-27 Inventory # 9372 Lever Operated Collet Closer Various Tool Holders Various Sized Collets

Feeler High Accuracy Lathe FTS-27 ($3500 OBO)

• Manufacturer: Feeler

“USED; REFURBISHED 2025” Swing Over Bed : 9 inches Distance Between Centers : 36 inches Travel of Turret Slide : 4″ Turret Hole Diameters : 5/8″ Collet Type : 5C collet capacity Collet Closer : Lever-operated 5C ...

2020 FEELER FTC 350 LMC

• Manufacturer: Feeler
• Spindle bore: 52 mm

manual tailstock - Ø 70mm / 90mm hydraulically controlled tailstock quill - MT-4 electrical cabinet heat exchanger set of jaws (1 set of hard jaws, 3 sets of soft jaws) 12-position tool head with VDI-40 (DIN 1809...

2010 FEELER FTC-260

• Manufacturer: Feeler

CNC System: FANUC oi-Mate TDX*Z axis travel: 150*340mmSpindle speed: 60-6000rpmSpindle power: 7.5/11kwSpindle through hole: 56mmSpindle bearing diameter: 90mmFast moving rate of X axis: 30m/minZ-axis fast feed ra...

2010 FEELER FTC-50L

• Manufacturer: Feeler

CNC System: FANUCThrough-hole diameter: 117mmmachining diameter: 680mmmachining length: 1500mm15-inches chuck 12-position heavy-duty tool turretLinear railAccuracy: within 10 μ

2016 FEELER FTC-260

• Manufacturer: Feeler

CNC System: FANUCX*Z Axis Travel: 150 x 340 mmSpindle Speed: 60 - 6000 rpmSpindle Power: 7.5 / 11 kWSpindle Through Hole: 56 mmSpindle Bearing Diameter: 90 mmFast Moving Rate of X Axis: 30 m/minZ-axis Fast Feed R...