Used Lathes in Poland

TUD 40X1500 Lathe

Turning Ø: 440 mm Turning Ø over cross slide: ±240 mm Chuck: 250 mm Spindle bore: 56 mm Turning length: 1500 mm Speed range: 18 - 1800 rpm Tailstock taper: MK5 Motor power: 4 - 6.7 kW Machine in good condition an...

TOS SN 55B Lathe

• Manufacturer: TOS

Speed range: 10 - 1000 rpm (16 speeds) Spindle bore: 76 mm Chuck: 315 mm Turning length: 2000 mm Turning Ø over bed: 560 mm Turning Ø over cross slide: 280 mm Bridge: removable Tool post: quick-change with 4 inse...

Janus Lathe

The machine tool is intended for machining of objects usually with the surface of rotary lumps (rollers, cones, balls, internal and external threads). The machining tool is most often a turning tool, drill or thr...

Lathe TUR 50 SNDC

• Manufacturer: TuR
• Model: 50

The machine tool is intended for machining of objects usually with the surface of rotary lumps (rollers, cones, balls, internal and external threads). The machining tool is most often a turning tool, drill or thr...

Lathe TUM 25 B

The machine tool is intended for machining of objects usually with the surface of rotary lumps (rollers, cones, balls, internal and external threads). The machining tool is most often a turning tool, drill or thr...

Romanian Lathe SNA800/2000

The machine tool is intended for machining of objects usually with the surface of rotary lumps (rollers, cones, balls, internal and external threads). The machining tool is most often a turning tool, drill or thr...

TUB 32 x 1000 lathe

The machine tool is intended for machining of objects usually with the surface of rotary lumps (rollers, cones, balls, internal and external threads). The machining tool is most often a turning tool, drill or thr...

FAT TUR 630 M x2500 lathe

• Manufacturer: TuR

A machine tool designed for machining objects most often with a surface of solids of revolution (shafts, cones, balls, internal and external threads). The machining tool is most often a turning tool, drill or thr...

RAFAMET Wheel Turning Lathe Rafamet XAD 112 Railway Wheel Lathe

• Manufacturer: RAFAMET

RAFAMET Wheel Turning Lathe XAD 112 Width: 1000-1676 mm Axis length: 1327-2700 mm Diameter of the wheels: 460-1120 mm Axle diameter: 70-200

Denn RPE 290 Automatic Spinning Lathe

• Manufacturer: DENN

Denn Mod.RPE 290 Automatic Spinning Lathe. More information on request. Yom: 2002

UNDER FLOOR WHEEL LATHE RAFAMET UGB 150

• Manufacturer: RAFAMET

UNDER FLOOR WHEEL LATHE RAFAMET UGB 150 Truck guage: 1435 mm Range of wheel tread diameters: 600 to 1,500 mm Bxqi8y9mg Maximum axle load: 250 kN Minimum wheel base: 1,700 mm

Spinning LATHE machine LEIFELD PLB 1200

• Manufacturer: Leifeld
• Model: PLB 1200

Max. blank / workpiece over bed1200 Max. blank / workpiece in the gap2400 Ø Centre height over bed600 mm Distance between centers2350 mm Length of the gap400 mm Maximum sheet thickness6 mm Stroke X-Axis1200...

RAFAMET UBB 112 wheel lathe rafamet UBB 112

• Manufacturer: RAFAMET

RAFAMET wheel lathe UBB 112 yom: 1985 turning diameter 700 - 1120 mm clamping length 540 - 1050mm Bt8y3qjdt8 machine dimensions: L:8500mm x W:3700mm x H:1900mm more information on request

RAFAMET UBB 112 wheel lathe rafamet UBB 112

• Manufacturer: RAFAMET

RAFAMET wheel lathe UBB 112 yom: 1985 turning diameter 700 - 1120 mm clamping length 540 - 1050mm Bt8y3qjdt8 machine dimensions: L:8500mm x W:3700mm x H:1900mm more information on request