Used Turret Lathes

3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe

• Manufacturer: Warner & Swasey
• Model: 3A M3500

If you would like the machine reconditioned, the above work will be started once the PO and deposit are received. Estimated time frame eight weeks

One Used 1 A Warner & Swasey Square Head Saddle Type Turret Lathe Model ...

• Manufacturer: Warner & Swasey
• Model: 1A M3400

If you would like the machine reconditioned, the above work will be started once the PO and deposit are received. Estimated time frame 12 to 14 weeks with current workload.

ONE (1) USED: 4A WARNER & SWASEY LONG BED SQUARE HEAD TURRET LATHE

• Manufacturer: Warner & Swasey
• Model: 4A 3550

If you would like the machine reconditioned, the above work will be started once the PO and deposit are received. Estimated time frame eight weeks

2 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Model 3470...

• Manufacturer: Warner & Swasey
• Model: 2A M3470

2 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Model 3470 Lot 710 Swing Over Bed Ways 20-1/2" Swing Over Cross Slide Carriage 16" Center Distance 43" Spindle Hole 3-3/4" Spindle Nose A - 11 Spindle...

Turret Lathe- “Warner & Swasey, Electro-Cycle, #10

• Manufacturer: Warner & Swasey

This lathe WORKS. We tried it. We verified: our W & S Electrocycle spindle turns, the cross slide works and the turret rotates fine in all six indexed positions.. We put it under power and each basic functions wo...

4 A Used Warner & Swasey Lever Head Saddle Type Turret Lathe Model 1500

• Manufacturer: Warner & Swasey
• Model: 4A M1500

Note: Machine Will Have Both Aprons And Rapid Traverse Boxes Reconditioned. Rapid drive unit reconditioned. New Feed And Rapid Shafts. New pin and cups in square and hex turrets. Head Stock Flushed And New Oil ...

4 A Used Warner & Swasey Lever Head Saddle Type Turret Lathe Model 1500

• Manufacturer: Warner & Swasey
• Model: 4A M1500

Note: Optional: Machine Will Have Both Aprons And Rapid Traverse Boxes Reconditioned. Rapid drive unit reconditioned. New Feed And Rapid Shafts. New pin and cups in square and hex turrets. Head Stock Flushed An...

5 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Model 3600...

• Manufacturer: Warner & Swasey
• Model: 5A M3600

HARDINGE MODEL HC CF PRECISION CHUCKER LATHE, 13″, BC 5″ Chuck, Collets

• Manufacturer: Hardinge
• Model: HC

���Normal wear from use, always well maintained, ready to work!��� HARDINGE Model HC CF Precison CHUCKER, LATHE Chuck 5 in. 3jaw. Includes collets yes, Only $4,499.00 USD! Sold as is, shipping not included. Load...

1980 WARNER & SWASEY 4A-3550

• Manufacturer: Warner & Swasey
• Model: 4A 3550

Equipped With: 24" 4 jaw chuck Coolant Chip Pan Rapid Traverse Flange Holders (5) Taper on Front Carriage

1966 WARNER & SWASEY 4A M-3580 Lot 13

• Manufacturer: Warner & Swasey
• Model: 4A M3580

4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Swing Over Ways 28-1/4" Swing Over Cross Slide Carriage 22" Spindle Hole 12-1/2 Center Distance 62" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-15 C...

1960 WARNER & SWASEY 4A M-3580 Lot 16

• Manufacturer: Warner & Swasey
• Model: 4A M3580

4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Swing Over Ways 28-1/4" Swing Over Cross Slide Carriage 22" Spindle Hole 12-1/2 Center Distance 62" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-20 C...

1969 WARNER & SWASEY 4A M-3550 Lot 48

• Manufacturer: Warner & Swasey
• Model: 4A M3550

4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Center Distance 144" Spindle Hole 9-1/4" Spindle Speeds 20 To 526 Rpm's Chuck Size Fro...

1966 WARNER & SWASEY 4A M-3550 Lot 41

• Manufacturer: Warner & Swasey
• Model: 4A M3550

4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Center Distance 124" Center Distance Spindle Nose To Turret Face 144" Spindle Hole 9-1...

BULLARD 50

• Manufacturer: Bullard
• Model: 50