Used Turret Lathes

17 ft Swing Gray CNC VBM, 192" table, 204" swing,

Additional Info: GE FANUC 15-TT CNC Controls Set of Four 14" Face Plate Jaws (For use with Plain Table) RPM Indicating Tachometer Indicator Table load Meter Flood Coolant, Mist Coolant, Chip Conveyor, Chip Guards...

8M table dia Shibaura CNC Vert Turning & Milling Gantry type

• Manufacturer: Shibaura

Additional info: Turning Table turning speed: 1-20 rpm Ram cross section: 350 x 350 mm Y axis travel: 5000 mm Z axis travel: 2600 mm Main motor: 180 kW Control panel #1: Fanuc 18it-B Controls Grinding attachment ...

5,600mm swing HNK HCT-52T 5200x5600

Equipped with 6-Jaw Chuck Installed and Under Power for Inspection

15 mtr Swing x 4.5 mtr height Vertical

Installed and Under Power for Inspection Available for immediate inspection and delivery

12 meter dia Schiess Froriep CNC type Heavy

• Manufacturer: Schiess Froriep

Additional information as follows: Model #'s are 80 DV 33-750/800/1200-800/400 Table diameter: 7,500mm Table and base height: 2,150mm Table surface height above floor: 150mm Max. turning diameter by ram on cross ...

5,000mm swing HNK HCT-45T 4500x5000

Equipped with 6-Jaw Chuck Installed and Under Power for Inspection

100" dia DTI HOGGER CNC controlled Heavy Duty

Although this Double Column VTL is designed to accept two (2) 60 Tool Changers, it is currently only equipped with one. Some additional specs are as follows: Max table speed - 180rpm Cross section of the Ram - 30...

HNK NT-60/80 CNC VTL, 6,000mm table dia, 8,000mm swing,

• Manufacturer: Waldrich Siegen

Additional info: Note: The Workpiece weight of 80,000 kgs (176,000 lbs) listed above is without the use of Steadies Still installed and under power

10 mtr turning dia x 7.2 mtr height Gantry Type 6-Axis

Machine Specs: Max. work size: 15m(L) x 10m(W) x 6.5m(H) Max. load on table: 250ton Max. turning diameter: 10m Max. machining height(Distance from table top to spindle surface):7200mm Max. machining Width:10m Col...

CLAUSING / ATLAS 13" TURRET LATHE

• Manufacturer: Clausing

USED "CLAUSING/ATLAS" VARIABLE SPEED PRECISION ENGINE LATHE WITH COLLET CLOSER ATTACHMENT (5C) & TURRET SWING OVER THE BED 12-3/4" DISTANCE BETWEEN CENTERS 33-1/2" SPINDLE HOLE 1-3/8" MAX. COLLET CAPACITY 1-1/16"...

7 A Used Jones & Lamson Saddle Type Turret Lathe

• Manufacturer: Jones & Lamson

7 A Used Jones & Lamson Saddle Type Turret Lathe Swing Over Bed Ways 20" Swing Over Cross Slide Carriage 15" Center Distance 40" Spindle Hole 3" Spindle Speeds 20 To 1,000 Rpm's Spindle Nose A-8 Chuck Size 12" 3 ...

Warner & Swasey Square Head 4A Model 3550 Saddle Type Turret Lathe

• Manufacturer: Warner & Swasey
• Model: 4A 3550

10 A Used Jones & Lamson Saddle Type Turret Lathe

• Manufacturer: Jones & Lamson