Used Turret Lathes

1976 Sundstrand V12
- Manufacturer: Sundstrand
Control: Fanuc 18-T | Maximum swing: 63" | Maximum turning diameter: 55" | Height under rail: 41.5" | Vertical ram travel: 31" | Horizontal rail travel: 37" | Travel below saddle: 22" | Rapids: 300 IPM | Cross r...
Town of Rockingham, VT
2015 Hartford 1250
- Manufacturer: Hartford
Table diameter: 49â€ | Max. swing: 60â€ | Max. turning diameter: 59â€ | Max. turning height: 48â€ | Max. mass of work piece: 13,200lbs | Horizontal travel (x-axis): 45â€ | Vertical travel (z-axis): 35.1â€ ...
Town of Rockingham, VT
1975-2012 Gray 48
Control: Dynapath G Code & Conversational (added in 2012) | Table size: 48" | Max swing: 56"
Town of Rockingham, VT
1996 Motch 219-VNC
Retrofitted in 1996 Fanuc series 16T CNC control with 14'' color screen 2-Axis carriage (2) 12'' woodworth pull-back chucks 25'' swing Vari-speed 0-1600 RPM 75 Hp spindle drive motor (2) 6 posit...
Town of Rockingham, VT
Trusted Seller
One Used 1 A Warner & Swasey Square Head Saddle Type Turret Lathe Model ...
- Manufacturer: Warner & Swasey
- Model: 1A M3400
If you would like the machine reconditioned, the above work will be started once the PO and deposit are received. Estimated time frame 12 to 14 weeks with current workload.
$46,500 USD
Navasota, TX
Trusted Seller
ONE (1) USED: 4A WARNER & SWASEY LONG BED SQUARE HEAD TURRET LATHE
- Manufacturer: Warner & Swasey
- Model: 4A 3550
If you would like the machine reconditioned, the above work will be started once the PO and deposit are received. Estimated time frame eight weeks
Navasota, TX
Trusted Seller
2 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Model 3470...
- Manufacturer: Warner & Swasey
- Model: 2A M3470
2 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Model 3470 Lot 710 Swing Over Bed Ways 20-1/2" Swing Over Cross Slide Carriage 16" Center Distance 43" Spindle Hole 3-3/4" Spindle Nose A - 11 Spindle...
Navasota, TX
Trusted Seller
Turret Lathe- “Warner & Swasey, Electro-Cycle, #10
- Manufacturer: Warner & Swasey
This lathe WORKS. We tried it. We verfied: our W & S Electrocycle spindle turns, the cross slide works and the turret rotates fine in all six indexed positions.. We put it under power and each basic functions wor...
$1,400 USD
Montreal, Canada
1994 Okuma & Howa ACT-2SP-V3
- Manufacturer: Okuma
Maximum workpiece diameter: 13.78" | Maximum workpiece height: 16.14" | X-axis (longitudinal) travel: 13.78" | Z-axis (vertical) travel: 16.14" | Chucks (2): 12" Diameter | Maximum swing: 20" | Number of tools f...
Town of Rockingham, VT
Trusted Seller
4 A Used Warner & Swasey Lever Head Saddle Type Turret Lathe Model 1500
- Manufacturer: Warner & Swasey
- Model: 4A M1500
Note: Machine Will Have Both Aprons And Rapid Traverse Boxes Reconditioned. Rapid drive unit reconditioned. New Feed And Rapid Shafts. New pin and cups in square and hex turrets. Head Stock Flushed And New Oil ...
$72,500 USD
Navasota, TX
Trusted Seller
4 A Used Warner & Swasey Lever Head Saddle Type Turret Lathe Model 1500
- Manufacturer: Warner & Swasey
- Model: 4A M1500
Note: Optional: Machine Will Have Both Aprons And Rapid Traverse Boxes Reconditioned. Rapid drive unit reconditioned. New Feed And Rapid Shafts. New pin and cups in square and hex turrets. Head Stock Flushed An...
$72,500 USD
Navasota, TX
Trusted Seller
5 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Model 3600...
- Manufacturer: Warner & Swasey
- Model: 5A M3600
Navasota, TX
Trusted Seller
HARDINGE MODEL HC CF PRECISION CHUCKER LATHE, 13″, BC 5″ Chuck, Collets
- Manufacturer: Hardinge
- Model: HC
“Normal wear from use, always well maintained, ready to work!” HARDINGE Model HC CF Precison CHUCKER, LATHE Chuck 5 in. 3 jaw. Includes collets yes, Only $4,499.00 USD! Sold as is, shipping not included. Loaded f...
$4,499 USD
Montreal, Canada
Trusted Seller
1980 WARNER & SWASEY 4A-3550
- Manufacturer: Warner & Swasey
- Model: 4A 3550
Equipped With: 24" 4 jaw chuck Coolant Chip Pan Rapid Traverse Flange Holders (5) Taper on Front Carriage
Houston, TX
Trusted Seller
1960 WARNER & SWASEY 4A M-3580 Lot 16
- Manufacturer: Warner & Swasey
- Model: 4A M3580
4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Swing Over Ways 28-1/4" Swing Over Cross Slide Carriage 22" Spindle Hole 12-1/2 Center Distance 62" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-20 C...
Navasota, TX
Warner & Swasey M4670 Turret Lathe
- Manufacturer: Warner & Swasey
- Model: M4670
Good condition Warner & Swasey M4670 Turret Lathes manufactured in 1969. Located in USA and other countries. Click request price for more information.
USA