Used Processing in Indiana, USA

Steel Hopper Parts Feeder Floorbin Elevator 12" Steel Belt Incline Conveyor

In Good Used Condition. Tested and cleaned in our shop. Heavy steel frame and steel belt. Has been modified with a right side discharge and return chute. Steel belt cleats are cut down and welded on angle. Bin s...

Vibracraft Vibratory Parts Feeder 36" Stainless Bowl Bottle Cap Sorter 115V

• Manufacturer: Vibracraft

In Good Used Condition. Will need serviced and some hoses replaced. Vibrators are tested. 3 Vibrator unit with controller 115V. Feeder was used for aerosol spray bottle trigger caps. 5" inner track feeds out an...

Eurofork SD180x85 Telescopic Fork Material Mover 200kg 1650mm Long 1750mm Stroke

• Manufacturer: Eurofork

New in Opened Packaging. New Surplus, Acquired From Spare Parts Storeroom. The top plate is 1350x400mm. It has a Sew gearmotor. 230/460V. 3Ph Has room for an connecting shaft. This drive has the motor. Weight lim...

Haumiller Pneumatic Vibratory Parts Feeder Bin 24x24" Stainless Hopper

• Manufacturer: Haumiller

In Good Used Condition. 24"x 24" Stainless hopper 16" depth. Has a pneumatic vibrator on the discharge chute. 17" discharge height. 34" overall height. 14" x 6" base. If this item ships as Flat Rate Freight pleas...

36" X 36" Portable Steel Bulk Material Bin Gravity Hopper With Fork Pockets

In good used condition BIN DEMENSIONS 36" X 36" X 24" down to the angle, then there is 16" of angled There is a 6" butterfly valve on the bottom and a 6" and 18" axcess holes and a 3" pipe on the top Bin has nice...

Fortville Feeders Vibratory Parts Feeder 60" Stainless Bowl

• Manufacturer: Fortville Feeders

In Good Used Condition. -Vibrators are removed. Feet need replaced. 60" Overall diameter. 36" Inside Bowl dia x 18" depth. 5" inner track width feeds out to 2" then 1-7/8" inside width discharge chute. 20" disch...

Service Engineering Stainless Rotary Feeder 48" Centrifugal Parts Sorter

• Manufacturer: Service Engineering

Used, in Good Working Condition. Removed From a Working Environment. Control Panel has 2 Powerflex drives. Centrifugal bowl is 48" across 4" wide x 1-3/4" High exit 3Ph 1/2 HP motor. If this item ships as Flat Ra...

(3) Cast Iron Seats

There is an Excelsior, Vulcan, and an unknown manufacturer. All appear to be in decent shape.

(3) Cast Iron Seats

All 3 are unknown manufacturers. All appear to be in decent shape.

(3) Cast Iron Seats

One is a Champion and the other two are unknown manufacturers. The green and yellow seat has a piece missing.

(3) Cast Iron Seats

There is a Deering and two are unknown manufacturers. All appear to be in decent shape.

(2) Cast Iron Seats

One is a Rock Island and the other is a Chieftan. Both appear to be in good shape.

Rare- Deere and Mansure Co. Cast Iron Seat

• Manufacturer: John Deere

One is a Deere and Mansur, the other two are unknown manufacturers. All appear to be in decent shape.

(3) Cast Iron Seats

There is a Moline, McCormick, and an unknown manufacturer. The McCormick has a piece missing.

(3) Cast Iron Seats

There are 2 Deerings and an unknown manufacturer. The black one and the unpainted one both have cracks.