Used Processing in Indiana, USA

Mixer, Littleford, KM-600 D, Continuous, C/st, 21 CF, #D737081

• Manufacturer: Littleford

Littleford Continuous Mixer, Model KM-600 D - Carbon steel construction with 159-gallon (21 cubic feet) capacity and one chopper (openings for 3 more). Measures 11' long x 70" wide x 4' tall.

Mixer, Ribbon, 100 CF, C/st, Jkt, 15 PSI, 25 HP #D737105

Ribbon mixer, carbon steel construction, 100 cubic feet capacity, single ribbon, 2" x 5/16" wide, 14' 5" x 12" paddles also ribbons and paddles bolted on, 3" center shaft, air operated discharge gate 26" long, 15...

Service Engineering Vibratory Bowl Feeder 27CCW 27" Base Small Parts Sorter 120V

• Manufacturer: Service Engineering

Used, in Good Working Condition, Tested OK. This was to sort small parts. Bowl is stainless steel. Ledges are 3/8" wide. Outfeed is 23/128" wide Uses 120V power. Base vibrator is 30" diameter. Base is 1-15/32" Th...

Stromag Vibratory Parts Feeder 15" Stainless Bowl 18x18" Feed Hopper 115V

• Manufacturer: Stromag

In Good Used Condition. Vibrator units on the bowl and one on feed hopper. 115V. Includes the speed controllers. 1" and 1-1/16" track width at discharge. Hopper size 18"x 18"x 14" Depth. 7" chute width. If this...

Vibratory Parts Feeder 38" Stainless Bowl 115V

In Good Used Condition. 120V power. 2 vibrator units. Cord and air hoses are cut. Tested ok. Feeder was used for aerosol bottle caps. 38" Overall bowl diameter. 27" Inside bowl dia x 9" depth. 2-1/2" inner tra...

Vibracraft Vibratory Parts Feeder 30" Stainless Bowl Bottle Cap Sorter 115V

• Manufacturer: Vibracraft

In Good Used Condition. Will need serviced and some hoses replaced. Vibrators are tested. 2 Vibrator unit with controller 115V. Feeder was used for aerosol spray bottle triggers. 3" inner track feeds out and fl...

United Toolers Vibratory Parts Feeder 66" Stainless Bowl 115V

• Manufacturer: United Toolers

In Good Used Condition. 3 vibrator units. 115V. Feeder was used for aerosol bottle caps. 66" Overall bowl diameter. 36" Inside bowl dia x 24" depth. 7" inner track width feeds out to 2-1/4" width at discharge 2...

Steel Hopper Parts Feeder Floorbin Elevator 12" Steel Belt Incline Conveyor

In Good Used Condition. Tested and cleaned in our shop. Heavy steel frame and steel belt. Has been modified with a right side discharge and return chute. Steel belt cleats are cut down and welded on angle. Bin s...

Vibracraft Vibratory Parts Feeder 36" Stainless Bowl Bottle Cap Sorter 115V

• Manufacturer: Vibracraft

In Good Used Condition. Will need serviced and some hoses replaced. Vibrators are tested. 3 Vibrator unit with controller 115V. Feeder was used for aerosol spray bottle trigger caps. 5" inner track feeds out an...

Eurofork SD180x85 Telescopic Fork Material Mover 200kg 1650mm Long 1750mm Stroke

• Manufacturer: Eurofork

New in Opened Packaging. New Surplus, Acquired From Spare Parts Storeroom. The top plate is 1350x400mm. It has a Sew gearmotor. 230/460V. 3Ph Has room for an connecting shaft. This drive has the motor. Weight lim...

Haumiller Pneumatic Vibratory Parts Feeder Bin 24x24" Stainless Hopper

• Manufacturer: Haumiller

In Good Used Condition. 24"x 24" Stainless hopper 16" depth. Has a pneumatic vibrator on the discharge chute. 17" discharge height. 34" overall height. 14" x 6" base. If this item ships as Flat Rate Freight pleas...

(3) Cast Iron Seats

2 are Hoosiers and one is an unknown manufacturer. All appear to be in decent shape but the blue Hoosier has been repaired on the bottom.

(3) Cast Iron Seats

All are unknown manufacturer. All appear to be in good shape.

(3) Cast Iron Seats

2 are Milwaukee and one is a McCormick. All appear to be in good shape.

(3) Cast Iron Seats

One is a Deering and the other two are unknown manufacturers. All appear to be in good shape.