Used Processing in Indiana, USA

36" X 36" Portable Steel Bulk Material Bin Gravity Hopper With Fork Pockets

In good used condition BIN DEMENSIONS 36" X 36" X 24" down to the angle, then there is 16" of angled There is a 6" butterfly valve on the bottom and a 6" and 18" axcess holes and a 3" pipe on the top Bin has nice...

Fortville Feeders Vibratory Parts Feeder 60" Stainless Bowl

• Manufacturer: Fortville Feeders

In Good Used Condition. -Vibrators are removed. Feet need replaced. 60" Overall diameter. 36" Inside Bowl dia x 18" depth. 5" inner track width feeds out to 2" then 1-7/8" inside width discharge chute. 20" disch...

Service Engineering Stainless Rotary Feeder 48" Centrifugal Parts Sorter

• Manufacturer: Service Engineering

Used, in Good Working Condition. Removed From a Working Environment. Control Panel has 2 Powerflex drives. Centrifugal bowl is 48" across 4" wide x 1-3/4" High exit 3Ph 1/2 HP motor. If this item ships as Flat Ra...

Vibratory Parts Feeder 34" Stainless Bowl 115V

In Good Used Condition. 120V power. 2 vibrator units with speed control. Tested ok. Feeder was used for aerosol bottle caps. 34" Overall bowl diameter. 22" Inside bowl dia x 9" depth. 2-1/2" inner track width f...

Fortville Feeders Vibratory Parts Feeder 44" Stainless Bowl 120V

• Manufacturer: Fortville Feeders

In Good Used Condition. -One Vibrator is removed. 120V power. 2 rubber feet are missing and one spring support. 27" Inside Bowl dia x 12" depth. 44" Overall diameter. 2-1/2" inner track width feeds out to a 1-...

(3) Cast Iron Seats

There is a Deering, McCormick, and C. Aultman and Co., All appear to be in decent shape.

(3) Cast Iron Seats

There is a Buckeye and two unknown manufacturers. The buckeye has cracks near the middle.

(2) Cast Iron Seats

There is a Champion, Milwaukee, and Deering. The Deering has a crack in it and the Champion has a piece missing near the back.

(3) Cast Iron Seats

All 3 are unknown manufacturers. All appear to be in good shape but the black one does have a crack in it.

(3) Cast Iron Seats

All 3 are unknown manufacturers. All appear to be in good shape but the red one has a few cracks in it.

(3) Cast Iron Seats

Two Champions and a Fuller & Johnson. All appear to be in good shape.

(3) Cast Iron Seats

There is an Excelsior, Vulcan, and an unknown manufacturer. All appear to be in decent shape.