Used Extruders

Trusted Seller
2002 COPERION 2.3"
- used
- Manufacturer: Coperion Waeschle
Used 58mm Coperion Co rotating Mega Compounder with 11 barrel sections (34/1 L/D) and side feeder, New 3/2002. Has electrically heated water cooled barrel. Direct connected to 500 hp DC motor with SCR controller....
Hainesport, NJ
Trusted Seller
BUSS 200 HP
- used
- Manufacturer: Buss
Used 100mm Buss kneader with 9/1 L/D barrel. Driven by 200 hp DC motor, includes 5.94/1 gearbox, jacketed barrel and clam shell barrel opening. Includes operator control panel. Kneader will discharge into approxi...
Hainesport, NJ
Trusted Seller
2003 WERNER & PFLEIDERER ZSK20
- used
- Manufacturer: WP
- Model: ZSK20
Used 20mm Werner & Pfleiderer model ZSK20 co-rotating twin screw extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft. Extrude...
Hainesport, NJ
Trusted Seller
BRABENDER 88
- used
- Manufacturer: Brabender
Used 25mm 24/1 L/D Brabender twin screw extruder package. Has air cooled extruder, temperature control panel, type D10002, prep center with model 088 type 09-25-000 temperature pressure module. Includes 10 HP DC ...
Hainesport, NJ
Trusted Seller
2014 STEER ENGINEERING OMICRON 12P
- used
- Manufacturer: STEER ENGINEERING
Used 12mm 45/1 L/D Steer Engineering pharmaceutical grade stainless steel co-rotating twin screw extruder. Model Omicron 12P, serial #EA00427, new 2014. Driven by a 2 HP, 480 volt/3/60 motor. Includes control pan...
Hainesport, NJ
Trusted Seller
CO-EX BLOCK 6-Layer
- used
- Manufacturer: CO-EX BLOCK
Used extrusion co-ex Block last used in a laboratory environment with approximately 1.25" diameter extruders and a 12" sheet die. Includes six (6) inserts of varying percentages. Five (5) are in a box and one (1)...
Hainesport, NJ
Trusted Seller
2000 CLOEREN 2.5", 3.5" and 5.25"
- used
- Manufacturer: CLOEREN
Used Cloeren 3-layer co-ex block designed for asymmetric layer configurations (A/B/C at 12/64/24%). For 2.5", 3.5" and 5.25" extruders. Manufactured 2000 Never used. Feed block is a variable geometry vein type.
Hainesport, NJ
60mm American Maplan Single Screw Extruder
- used
- Manufacturer: Maplan
60mm American Maplan Single Screw Extruder 25:1 L/D 40 HP Siemens Motir Includes Screw Baumuller b maxx 4000 drive Nord Gear Box 15.56 gear ratio
Rockville Centre, NY
Trusted Seller
LEISTRITZ 30mm
- used
- Manufacturer: Leistritz
Used 30mm Leistritz counter-rotating twin screw extruder, 42/1 L/D vented barrel. New 1987. Has 11kw motor, 2200 rpm, 422 volt input. Gearbox rated at 13.5kw at 60hz. Barrel is electrically heated and air cooled ...
Hainesport, NJ
Trusted Seller
Gloucester 4.5"
- used
- Manufacturer: Gloucester
Used 4.5" Gloucester hydraulic screen changer with strand die and hydraulic pumping system. Strand die has thirteen (13) 1/8" diameter holes.
Hainesport, NJ
Trusted Seller
Beringer 4.5"
- used
- Manufacturer: Beringer
Used 4.5" Beringer hydraulic screen changer with breaker plates.
Hainesport, NJ
Trusted Seller
ZUMBACH KW20
- used
- Manufacturer: Zumbach
- Model: KW20
Used Zumbach model KW20 surface fault detector.
Hainesport, NJ
Trusted Seller
DAVIS STANDARD 2.5"
- used
- Manufacturer: Davis-Standard
- Model: 25
Used 2.5" Davis Standard extrusion screw.
Hainesport, NJ
Trusted Seller
DAVIS STANDARD 2.5"
- used
- Manufacturer: Davis-Standard
- Model: 25
Used 2.5" Davis Standard extrusion screw.
Hainesport, NJ
Trusted Seller
DAVIS STANDARD 2.5"
- used
- Manufacturer: Davis-Standard
- Model: 25
Used 2.5" Davis Standard extrusion screw. Marking on the screw read XA241155JT, C32819, and SL3-1.
Hainesport, NJ