Used Extruders

DAVIS STANDARD 2.5"

• Manufacturer: Davis-Standard
• Model: 25

Used 2.5" Davis Standard extrusion screw.

MGB SC12

• Manufacturer: MGB

Used MGB Model SC12 slide plate screen changer having (2) nominal 12" diameter breaker plates. Unit is mounted on stand with casters supplying approximately a 42" discharge height. Package includes 10 hp Power Mo...

MGB SC12

• Manufacturer: MGB

Used MGB Model SC12 slide plate screen changer having (2) nominal 12" diameter breaker plates. Unit is mounted on stand with casters supplying approximately 42" discharge height. Package includes a 10 hp Power Mo...

BERLYN HV-3

• Manufacturer: BERLYN

Used 18" wide Berlyn high velocity air stripper. Model HV-3, Sserial #1021171. Has 5 HP blower, 460 volt, 3 phase, 60 hertz. Includes starter.

GALA 38" x 39"

• Manufacturer: GALA

Used Gala SS bin only. Square construction, 38" x 39" with hinged top cover on 1/3 of top of bin, and openings on balance of 2/3. No pumps or filters included.

2006 Scheer Bay WAA300

• Manufacturer: Scheer

Used 13.5" wide Scheer Bay Model air knife. Model WAA300, Serial #WAA300-0582, new 2006. Driven by a 7.5 HP Baldor Super E motor, 460 volt 3 phase 60 hertz. Includes starter and controls. Caster mounted. Previous...

6.75" Wide

Used 6.75" Wide Air Knife. Top/bottom air input. 72" work height. Includes 1 hp blower, 208-230/460 volt.

GALA 403VDW

• Manufacturer: GALA

Used 50,000 Lb. Per Hour Gala Model 403VDW Stainless Steel Spin Dryer 43" diameter circular housing 20 hp Baldor motor Serial No. 911039-2

AIR KNIFE 6"

• Manufacturer: AIR KNIFE

Used 6" Wide Air Knife With 2 HP Blower

GALA 16.2ECLN-BF

• Manufacturer: GALA

Used Gala Stainless Steel Spin Dryer Model 16.2ECLN-BF Serial #982157

MERRITT DAVIS 80

• Manufacturer: Merritt Davis

Used 6" wide Merritt Davis model 80 solid belt puller supplying 80" belt contact length and approximately 8" of daylight on belts. Top and bottom belts are driven by drive shaft from 15 HP motor, and approximatel...

Lumber Tooling 6"

• Manufacturer: Lumber Tooling

Used artificial lumber tooling previously used for various shapes. Approximately 6" in width.

FARRIS C550VT

• Manufacturer: Farris

Used 7" x 22" Farris Solid Belt Puller Manufacturer: Farris Model: C550VT Rated at 4-74 feet per minute Has multi speed gearbox and variable speed transmission with manually adjusted belts

1994 1994 Berstorff 125 HP 6 Meter x180MM Twin Screw Extruder Reactor

1994 Berstorff N/A 125 HP 6 Meter x 180mm Twin Screw Extruder Reactor Consists of: 30,000 Flender process speed reducer Screws Barrel Die Outlet flange 2 heating zones 2 cooling zones 4 circulation pumps Shaft eq...

Extruder Line Pipe Acc Die

Used 1/2" tubing die electrically heated and adapted to fit 1 1/2" Sterling extruder.