- Trusted Seller
RANDCASTLE Ø51 мм × 203 мм
used
- Manufacturer: RANDCASTLE
Used 2" O.D. x 8" Wide Randcastle Sheet Extrusion 3-Roll Stack including Pull Roll Station and Single Position Winder.
Hainesport, NJ - Trusted Seller
2002 COPERION 2.3"
used
- Manufacturer: Coperion Waeschle
Used 58mm Coperion Co rotating Mega Compounder with 11 barrel sections (34/1 L/D) and side feeder, New 3/2002. Has electrically heated water cooled barrel. Direct connected to 500 hp DC motor with SCR controller....
Hainesport, NJ 6″ Davis Standard 34:1 -500 HP -Vented (2 vents) Extruders (2 available)
used
- Manufacturer: Davis-Standard
6″ Davis Standard 34:1 -500 HP -Vented (2 vents) Extruders (2 available)
Rockville Centre, NY- Trusted Seller
BUSS 200 HP
used
- Manufacturer: Buss
Used 100mm Buss kneader with 9/1 L/D barrel. Driven by 200 hp DC motor, includes 5.94/1 gearbox, jacketed barrel and clam shell barrel opening. Includes operator control panel. Kneader will discharge into approxi...
Hainesport, NJ 
3.5″ Davis Standard 24:1-Air Cooled -N-Vented Extruders (3) 1998
used
- Manufacturer: Davis-Standard
3.5″ Davis Standard Extruders Model #MV35IN35 – New 1998 (Three Available) Air Cooled 24:1 L/D Non-Vented HP 158 Gear Ratio: 17.39 SF 1.25
Rockville Centre, NY
Shangha Target 11" Rolling & Scoring Line with Extruder – Chiclet Production
used
52189024 Used Shangha Target 11" Rolling & Scoring Line with Extruder. Designed to make chiclets. Consisting of: Twin Screw extruder with 5" diameter screws, electrically heated, die for 11.5" sheet, Dusting conv...
Belvidere, IL- Trusted Seller
2003 WERNER & PFLEIDERER ZSK20
used
- Manufacturer: WP
- Model: ZSK20
Used 20mm Werner & Pfleiderer model ZSK20 co-rotating twin screw extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft. Extrude...
Hainesport, NJ - Trusted Seller
2014 STEER ENGINEERING OMICRON 12P
used
- Manufacturer: STEER ENGINEERING
Used 12mm 45/1 L/D Steer Engineering pharmaceutical grade stainless steel co-rotating twin screw extruder. Model Omicron 12P, serial #EA00427, new 2014. Driven by a 2 HP, 480 volt/3/60 motor. Includes control pan...
Hainesport, NJ - Trusted Seller
2001 DAVIS STANDARD PEDESTAL
used
- Manufacturer: Davis-Standard
Used 1.25" Davis Standard Pedestal Extruder With 36/1 L/D Vented Barrel. New 2001. Has electrically heated air cooled barrel, includes temperature control panel and 5 hp AC motor, 230/460 volt. Previously used as...
Hainesport, NJ - Trusted Seller
2008 COPERION ZSK-40-MEGA
used
- Manufacturer: Coperion Waeschle
Used 40mm Coperion Mega 40 co-rotating twin screw extruder. New 2008. No barrels or screws included. Driven by 200 hp AC motor, 1790 rpm, with Powerflight VFD controller. Has 1.155 gear ratio supplying 1200 rpm s...
Hainesport, NJ - Trusted Seller
Gloucester 4.5"
used
- Manufacturer: Gloucester
Used 4.5" Gloucester hydraulic screen changer with strand die and hydraulic pumping system. Strand die has thirteen (13) 1/8" diameter holes.
Hainesport, NJ - Trusted Seller
Beringer 4.5"
used
- Manufacturer: Beringer
Used 4.5" Beringer hydraulic screen changer with breaker plates.
Hainesport, NJ - Trusted Seller
Hainesport, NJ - Trusted Seller
DAVIS STANDARD 2.5"
used
- Manufacturer: Davis-Standard
- Model: 25
Used 2.5" Davis Standard extrusion screw.
Hainesport, NJ - Trusted Seller
DAVIS STANDARD 2.5"
used
- Manufacturer: Davis-Standard
- Model: 25
Used 2.5" Davis Standard extrusion screw.
Hainesport, NJ
Tip: Enter manufacturer, model or keyword
