Used Processing in Illinois, USA

Fitzpatrick Comminutor FitzMill, Model DASO- 6 – Stainless Steel

• Manufacturer: Fitzpatrick
• Model: DASO-6

53844010 Used Fitzpatrick Comminutor Fitzmill, Model DASO-6, Stainless Steel. (16) 1" wide x 5/16" thick x 3-3/4" long fixed knives. Approximately 6" diameter x 14" long Cutting chamber. Has gravity feed throat w...

Praxair Model SDBP Nitrogen Freeze Tunnel – 24” Wide x 22’ Long Conveyor

• Manufacturer: Praxair

53595001 Used Praxair Model SDBP Nitrogen Stainless Steel Freeze Tunnel. Single door, bottom pan, with number of product per hour - depending on materials, application, temperature rates and conveyor belt speed. ...

Guoxin Machinery FS-800 Universal Pulverizer – 50 HP, 800-2000 kg/h

53553005 Used Guoxin Machinery Universal Pulverizer, Model FS-800. Capacity 800 - 2000 kg/h. Main speed 1800 rpm. Driven by 37kW (50hp) motor. Feed hopper. Mounted on frame. Serial# 191012140.

Yucho Group Model X-10001H Nitrogen Freezer Tunnel – 60” Wide Belt

52603002 Used Yucho Group Limited Model X-10001H Nitrogen Freezer Tunnel. 60" wide x 454" long belt. 3 phase, 220 volt, 12 amps. Touch screen controls. Overall dimension: 78" side x 454" long x 65.5" tall. Built ...

Kent 9" x 24" Three Roll Mill – Industrial TRM for Fine Grinding & Dispersion

• Manufacturer: Kent

51065020 Used Kent 9" x 24" Small Production Three Roll Mill (TRM). with manual roll set, manual apron set, and manual roll temperature control. Probably driven through a silent chain drive by a 10 HP motor. Does...

Fitzpatrick Chilsonator – Model 4L x 10D, 10" x 4" Stainless Steel Rolls, 50–100 kg/hr Capacity

• Manufacturer: Fitzpatrick
• Model: 4L X 10D

49227002 Used Fitzpatrick Chilsonator Model 4L x 10D, 10" x 4" Stainless Steel Rolls, 50100 kg/hr Capacity. Dependent on density of product and roll pressure and screw speed is 50 to 100 kg/hr. (110 to 220 lbs./...

Munson Machinery Attrition Mill – Model SK-24-SS

• Manufacturer: Munson MachineryMunson Machinery

54139001 Used Munson Machinery Attrition Mill, Model SK-24-SS. 304 Stainless Steel construction. 6" diameter gravity fed inlet, with 3" diameter air inlet control with gate. 6" bottom outlet. Approximately 26" di...

High-Capacity Solvent Reclaimer for Sale – IST Rotoplus 400, 190°C Max Temp

• Manufacturer: IST

53487001 Used IST Solvent Reclaimer, Model Rotoplus 400. 400L loading capacity; 400 to 2000 liter/24 hour productivity rate. 190 degree C (374 F) maximum working temperature. 3/60/480V. Previously used for solven...

Thermatool Tube Cutting Machine - 2”-4.5” OD, ABB Drives, Scrap Conveyors

• Manufacturer: ABB

51610001 Used Thermatool Tube Cut-Off Machine. OD Range: 2"-4.5", Max Wall Diameter: .235". Max Speed 250 FPM, Hydraulic Accelerator Hydraulic Clutch, Encoder, Two Scrap Goose Neck Conveyors Unico Controller, ABB...

Buy 6" PFA Jacketed Column – Heat Transfer & Corrosion Protection

• Manufacturer: UnknownUnknown

50467009 Used 6" PFA lined column, jacketed. Dia (in): 6

6" PFA Jacketed Lined Column – Corrosion-Resistant, Industrial-Grade

• Manufacturer: UnknownUnknown

50467008 Used 6" PFA Jacketed Lined Column.

Carrier Ampli-Flow Vibrating Feeder – Model FC2410051/4304, Stainless Steel

• Manufacturer: CarrierCarrier

71239 Used Carrier Vibrating Equipment Ampli-Flow Vibrating Feeder, Model FC2410051/4304, Stainless Steel. 24" wide x 72" long, single deck with scalper type insert. Driven by an approximate 1 hp motor.

VDL Industrial Rotary Airlock (Built 2022) – B-HT350EX00 for Sale

54253002 Used VDL Industrial Products Rotary Air lock, Model B-HT350EX00. Driven by 0.37kW / 0.50 HP, 3/60/277/480 volt, 1730/15 rpm motor. Serial# U-221467/B. Built 2022.

ADM Stainless Steel Separator, Model C.V. | 48" OD, 891 Gallon, Built 2024

• Manufacturer: ADMADM

54197002 Unused ADM Stainless, Type 48" OD C-110 Separator, Model C.V. 891 Gallon. Approximately 48" diameter x 103" straight side. Vertical, 304 stainless steel. Internal rated 600/FV PSIG at -20 to 350 degrees...

Farrel Rubber/Plastic Laboratory Calender Mill – Inverted "L" 4-Roll, Adjustable Knives

• Manufacturer: Farrel

54180001 Used Farrel 4-Roll Inverted "L" Rubber/Plastic Laboratory Calendar Mill. 6" D x 13" L rolls. 500 degrees F max. roll temp. Up to 35 RPM. Fixed center roll w/ adjustable bottom, top, and offset. Full her...

Shanklin T-71 Shrink Wrapping Machine

• Manufacturer: Shanklin
• Model: T-71

Good condition Shanklin T-71 Shrink Wrapping Machines. Located in USA and other countries. Click request price for more information.