WELEX 4.5" EXTRUDER SCREW 12343
used
- Manufacturer: Welex
Welex 4.5″ extruder screw, 2 stage 36:1 L/D, S/N 1803592, 36:1 L/D.
Elk Grove Village, IL
WELEX 4.5″ EXTRUDER SCREW 12730
used
- Manufacturer: Welex
Welex 4.5″ extruder screw, no S/N, single stage, double spiral, chrome plated, 24:1 L/D. 150″ long.
Elk Grove Village, IL
WELEX 6″ EXTRUDER SCREW 12351
used
- Manufacturer: Welex
Welex 6″ extruder screw, S/N 24-0138, 38:1 L/D, 2 stage, 252.5″ overall length. Keyway is 9″ long x 1.5″ wide.
Elk Grove Village, IL
WELEX 6″ EXTRUDER SCREW 12347
used
- Manufacturer: Welex
Welex 6″ extruder screw, S/N JF05444-000, 32:1 L/D, 2 stage, 216″ overall length.
Elk Grove Village, IL
6″ WELEX EXTRUDER SCREW 12350
used
- Manufacturer: Welex
6″ Welex extruder screw, S/N 144812, 32:1 L/D, 2 stage 216″ overall length. 9″ long x 1.5″ wide keyway.
Elk Grove Village, IL
Elk Grove Village, IL
WELEX TWO STAGE 4.5″ EXTRUDER 12344
used
- Manufacturer: Welex
Welex 4.5″ extruder screw, 2 stage 36:1 L/D, S/N 180359.
Elk Grove Village, IL
WELEX 18″ X 41″ 3 18674
used
- Manufacturer: Welex
Welex model 18X41RHSL 18″ x 41″ 3-roll sheet extrusion stack. S/N 4750. Rolls are silent chain driven by a 5 HP D/C motor and have air actuated nipping pressure with 8.5″ OD cylinders. Has 42″ wide rubber to meta...
Elk Grove Village, IL
NEW / UN WELEX 4.5 12346
used
- Manufacturer: Welex
New chrome plated Welex 4.5″ extruder screw, S/N 18079. 36:1 L/D, 8″ long x 1″ wide, keyway 190.5″ overall length.
Elk Grove Village, IL
WELEX 6″ 36:1 L/D 500 18830
used
- Manufacturer: Welex
One (1) used Welex model 6.0 36D 6″ 36:1 L/D extruder. S/N 6492. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate 66″ center line height. Koellman model Unex 8.13 gea...
Elk Grove Village, IL
WELEX 2″ 24:1 L/D EXTRUDER 17438
used
- Manufacturer: Welex
Welex model 200-24/1, 2″ 24:1 L/D extruder with a three (3) zone electrically heated, air cooled non-vented barrel at approximately a 50″ centerline height. Gearbox is a Koellmann Gear and is belt driven by a 20 ...
Elk Grove Village, IL
WELEX 3.5″ 30:1 L/D 100 17579
used
- Manufacturer: Welex
One (1) used 3.5″ 30:1 L/D Welex Model 350-2-1984-RHNV extruder having an electrically heated water cooled (closed loop) non-vented barrel at a 54″ center line height. Koellmann gearbox has a reduction ratio of 1...
Elk Grove Village, IL
WELEX 3.5″ 30:1 L/D 150 17954
used
- Manufacturer: Welex
One (1) used Welex 3.5″ 30:1 L/D extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69″ center line height. Center line height can be reduced approximately 8″ by removing...
Elk Grove Village, IL
WELEX 2″ 24:1 L/D CO-EXTRUDER 17576
used
- Manufacturer: Welex
One (1) used 2″ 24:1 L/D Welex co-extruder. Water cooled. Missing motor, drive panel, and pedestal. Last used on a sheet line.
Elk Grove Village, ILWelex High Efficiency Horizontal Cooler Mixer – 1200L, Stainless Steel, 20 HP
used
- Manufacturer: Welex
51816001 Used Welex High Efficiency Horizontal Cooler / Mixer. Model 1200HC, 1200 Liter Total Capacity, 316 Stainless Steel Vessel and Plows, Chrome Plated Shaft. Typical rate 2400 - 4000 lbs per hour. Approximat...
$4,275 USDBelvidere, IL
Tip: Enter manufacturer, model or keyword
