50T 25″X24, 30″ DAYLIGHT, 18″ STROKE, WABASH, C-FRAME
- Manufacturer: Wabash
MODEL C50-2424-2TMACX. SERIAL #7994-12. 4” CLEARANCE BEHIND BED AND SLIDE. 12” BORE CLAMP CYLINDER WITH 8” ROD AND 18” STROKE. APPROX 30” MAX DAYLIGHT. APPROX 37” OPERATOR HEIGHT. GUIDED WITH CLAMP CYLINDER AND A...
Grand Rapids, MI- Trusted Seller
75 Ton Wabash Model 75-1515-SM Hydraulic Molding Press
- Manufacturer: Wabash
75 Ton Wabash 75-1515-SM, 4 post, upstroke, 15" x 15" steel plates, 8" str., 16" DL, #29342 USED 75 TON WABASH MODEL 75-1515-SM HYDRAULIC MOLDING PRESS Model 75-1515-SM 4 post upstroke type; floor standing Daylig...
Elk Grove Village, IL 
12T 13”X12”, 2.25”-11.25” ADJ. DL., 6”STR., WABASH
- Manufacturer: Wabash
MODEL 12-12-2T. SERIAL #235. ADJUSTABLE DAYLIGHT OF APPROX 2.25” TO 11.25”. CYLINDER IS 2” BORE WITH 6” STROKE. GUIDED ON 1.25” DIAMETER POSTS. CLEARANCE BETWEEN THE POSTS IS 13.75” L TO R X 7.75” F TO B (13” X 6...
Grand Rapids, MI
3T 10″X16″, DOUBLE, 21” DAYLIGHT, 12” STR., WABASH, 4-POST
- Manufacturer: Wabash
2.5” DIA. RAM APPROX. 12” STROKE, APPROX. 21” DAYLIGHT. BED 16” L TO R X 10” F TO B 2” DIA. TIE RODS, WORKING HEIGHT APPROX. 40”, OVERALL HEIGHT 8”. COMPLETE WITH CONTROL PANEL WITH SLC 150, T-CAT, AND HEATER CON...
Grand Rapids, MI
50T 34”X31”, 50” DL., 24” STR., WABASH, 4-POST, 3HP
- Manufacturer: Wabash
S/N 7860. MODEL PC50-3030-9CTMX. NEW IN 1986. 41” L TO R OVERALL; 22 ½” F TO B BETWEEN THE POSTS. 34” L TO R X 31” F TO B NOMINAL BED SIZE. FULLY GUIDED ON 2” DIAMETER POSTS. TWO DOUBLE-ACTING CYLINDERS: 5” BORE;...
Grand Rapids, MI
12T 12”X12”, 4”-13” DAYLIGHT, 6” STR., WABASH, 4-POST
- Manufacturer: Wabash
MODEL 12-12-STMBAC. SERIAL #5947. CLEARANCE BETWEEN POSTS IS 13.75” L TO R AND 7.75” F TO B. TWO 12” X 12” X 1.25” STEAM/OIL PLATENS WITH 1” INSULATION UNDER EACH PLATEN. ADJUSTABLE DAYLIGHT FROM 4” TO 13” (IF PL...
Grand Rapids, MI- Trusted Seller
WABASH 25-2222-TRM HEATED PLATEN PRESS
- Manufacturer: Wabash
Serial #: 6032-4 | Country: United States | Compression bore and stroke: 5 x 7 | Transfer cylinder bore and stroke: 3.25 x 15 | Force (tons): 25 | Trans: 2 | Motor hp: 3 | Motor amps: 4.8 | Electrics: 220/3/60
Elk Grove Village, IL 
50 TON WABASH 18″ X 18″ FOUR-OPENING HYDRAULIC PRESS
- Manufacturer: Wabash
MODEL # PC-50-18-8TM. SERIAL #6406. CLAMP CYLINDER IS 7” BORE WITH A MAX STROKE OF 12”. SET UP WITH FOUR DAYLIGHT OPENINGS OF 3” EACH. TOTAL OF 8 ELECTRICALLY HEATED AND WATER COOLED PLATENS. FULLY GUIDED ON 2” D...
Grand Rapids, MI
60T 20.25″X18″, 9″-21″ DAYLIGHT, 7″ STROKE, 4-POST, WABASH
- Manufacturer: Wabash
OVERALL LEFT TO RIGHT BED IS 26” AND FRONT TO BACK BETWEEN THE POSTS IS 14.75”. NOMINAL BED IS 20.25” X 18”. 8” BORE CLAMP CYLINDER WITH APPROX 7” MAX STROKE. DAYLIGHT IS ADJUSTABLE FROM APPROX 9” TO 21”. FULLY G...
Grand Rapids, MI
30T 12”X12”, 13.5”-19.75” DL, 6” STROKE, WABASH, 4-POST
- Manufacturer: Wabash
MODEL G302H-12-ASTM. SERIAL #10048. NEW IN 1999. SET UP WITH FOUR ELECTRICALLY HEATED AND WATER COOLED PLATENS RESULTING IN TWO DAYLIGHT OPENINGS OF APPROX 3” EACH. PLATENS ARE 12” X 12” X 2.25”; EACH WITH FOUR (...
Grand Rapids, MI
300 TON WABASH 45” X 25” UP-ACTING FOUR-POST HYDRAULIC PRESS
- Manufacturer: Wabash
NOMINAL BED IS APPROX 45” L TO R X 25” F TO B. OVERALL L TO R IS APPROX 57.5” AND F TO B BETWEEN THE POSTS IS APPROX 11.5” (DISTANCE BETWEEN THE NUTS IS 42.5” L TO R X 8” F TO B)*. CLAMP CYLINDER IS A DOUBLE-ACTI...
Grand Rapids, MI
30T, WABASH 9″ X 9″ (2-OPENING) UP-ACTING FOUR-POST HYDRAULIC PRESS
- Manufacturer: Wabash
WABASH MODEL G302H-9-X. SERIAL #10680. SET UP WITH FOUR 9” X 9” ELECTRIC PLATENS. (FOUR 500 WATT HEATERS EACH) RATED TO 600 F AND TWO 8” OPENINGS (COULD BE ADJUSTED UP TO TWO 11” OPENINGS). CLAMP CYLINDER: 5” BOR...
Grand Rapids, MI
30 TON WABASH 15” X 15” UP-ACTING FOUR-POST HYDRAULIC PRESS
- Manufacturer: Wabash
Model G30H-15-B. Serial #9746. 15” x 15” electric platens: six heaters per platen (1/2” dia x 15”; 230 volt; 900 watt; 5400 watts per platen; rated to 800 F). Clamp cylinder is 5” bore with 6” max stroke and a 2”...
Grand Rapids, MI
12T 10”X7”, 2.5”-11.5”ADJ. DL., 6” STR., WABASH, 2-POST
- Manufacturer: Wabash
MODEL #12-10S. SERIAL #2707. 10” L TO R X 7” F TO B NOMINAL PLATEN SIZE. CLEARANCE L TO R BETWEEN THE POSTS IS 11.25”. CYLINDER IS 2” BORE WITH 6” STROKE. 1.25 THICK STEEL PLATE AND 1” THICK INSULATION BOARD ATTA...
Grand Rapids, MI- Trusted Seller
2003 Used 100 Ton Wabash Hydraulic Molding & Laminating Inline Press
- Manufacturer: Wabash
100 Ton Wabash, Hot/Cold Inline Press System w/ loader/unloader, 40" x 28" platens (10 Opening), New 2003, #28482 USED 100 TON WABASH HYDRAULIC MOLDING & LAMINATING INLINE PRESS NEW 2003 With loader & unloader Mo...
Elk Grove Village, IL
Tip: Enter manufacturer, model or keyword