- Trusted Seller
30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12"
- Manufacturer: Wabash
- Model: 30-1212-4STMBX
30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12" Used 30 ton Wabash press, model 30-1212-4STMBX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 3" daylight spacing, 14.5" wide tie...
Cleveland, OH - Trusted Seller
30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12"
- Manufacturer: Wabash
- Model: G302-CX
30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12" Used 30 ton Wabash Genesis platen press, model G302-CX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 4" daylight, 17" wide tie ...
Cleveland, OH 
Wabash 30T Transfer Press
- Manufacturer: Wabash
Item 3039 – One (1) Used Wabash Lab Press, 15” x 15” platens, 30 Ton closing force, 12T-transfer press, electric platens, individual controls, adjustable daylight, self contained hydraulic unit, 4-post
Cleveland, OH- Trusted Seller
100 TON WABASH 4 POST HYDRAULIC PRESS. #0777525
- Manufacturer: Wabash
Toledo, OH 
Wabash 75T Transfer Press
- Manufacturer: Wabash
Item 3040 – One (1) Used Wabash Transfer Press, 15” x 15” platens, 75 Ton closing force, 25T-transfer press, electric platens, individual controls, adjustable daylight, self contained hydraulic unit, 4-post
Cleveland, OH
Wabash 30T Lab Press
- Manufacturer: Wabash
Item 3038-1 – One (1) Used Wabash Lab Press, 15” x 12” mounting plates, 30 Ton, individual controls, adjustable daylight 12-22”, self contained hydraulic unit, 4-post type. Video Link:
Cleveland, OH
15" x 15" Wabash Press
- Manufacturer: Wabash
-15 Ton -(1) Available -Self contained hydraulic unit -Electric heated platens - Two daylight -460v
Erie, PA
Erie, PA- Trusted Seller
75 Ton Wabash Hydraulic Molding & Laminating Press
- Manufacturer: Wabash
- Capacity: 75,000 kg
- Stroke length: 304.79999999999995 mm
75 Ton Wabash, 4 Post, upstroke, 54” x 54” hot plates, 12” str., 20”-33” DL, #89552 USED 75 TON WABASH HYDRAULIC MOLDING & LAMINATING PRESS 4 post upstroke type; floor standing Daylight opening between (electrica...
Elk Grove Village, IL 
300 TON WABASH 45” X 25” UP-ACTING FOUR-POST HYDRAULIC PRESS
- Manufacturer: Wabash
NOMINAL BED IS APPROX 45” L TO R X 25” F TO B. OVERALL L TO R IS APPROX 57.5” AND F TO B BETWEEN THE POSTS IS APPROX 11.5” (DISTANCE BETWEEN THE NUTS IS 42.5” L TO R X 8” F TO B)*. CLAMP CYLINDER IS A DOUBLE-ACTI...
Grand Rapids, MI
50 TON WABASH 18″ X 18″ FOUR-OPENING HYDRAULIC PRESS
- Manufacturer: Wabash
MODEL # PC-50-18-8TM. SERIAL #6406. CLAMP CYLINDER IS 7” BORE WITH A MAX STROKE OF 12”. SET UP WITH FOUR DAYLIGHT OPENINGS OF 3” EACH. TOTAL OF 8 ELECTRICALLY HEATED AND WATER COOLED PLATENS. FULLY GUIDED ON 2” D...
Grand Rapids, MI- Trusted Seller
WABASH 25-2222-TRM HEATED PLATEN PRESS
- Manufacturer: Wabash
Serial #: 6032-4 | Compression bore and stroke: 5 x 7 | Transfer cylinder bore and stroke: 3.25 x 15 | Force (tons): 25 | Trans: 2 | Motor hp: 3 | Motor amps: 4.8 | Electrics: 220/3/60
Elk Grove Village, IL 
30 TON WABASH 15” X 15” UP-ACTING FOUR-POST HYDRAULIC PRESS
- Manufacturer: Wabash
Model G30H-15-B. Serial #9746. 15” x 15” electric platens: six heaters per platen (1/2” dia x 15”; 230 volt; 900 watt; 5400 watts per platen; rated to 800 F). Clamp cylinder is 5” bore with 6” max stroke and a 2”...
Grand Rapids, MI
30T, WABASH 9″ X 9″ (2-OPENING) UP-ACTING FOUR-POST HYDRAULIC PRESS
- Manufacturer: Wabash
WABASH MODEL G302H-9-X. SERIAL #10680. SET UP WITH FOUR 9” X 9” ELECTRIC PLATENS. (FOUR 500 WATT HEATERS EACH) RATED TO 600 F AND TWO 8” OPENINGS (COULD BE ADJUSTED UP TO TWO 11” OPENINGS). CLAMP CYLINDER: 5” BOR...
Grand Rapids, MI- Trusted Seller
2000 75 Ton Wabash G75H-18-18-BX Heated Platen Preess
- Manufacturer: Wabash
- Capacity: 75,000 kg
75 Ton Wabash, Model G47H-18-18-BX, 18" x 18" Platens COMPRE. CYL. 8x8 Platens @ 8000 Watts Each Specifications are accurate to the best of our knowledge, subject to verification.
Elk Grove Village, IL
Tip: Enter manufacturer, model or keyword