Used Machine Tools in Texas, USA

2007 Spiradrill LHD-50

• Manufacturer: Spiradrill
• Model: LHD-50

- Under 3,700 hours - Ready for work Hours/mileage: 3,654 as of 12/23 | General condition: Good

2023 IMT A250

• Manufacturer: IMT
• Model: A250

Like new, IMT A250 ready for work. The machine was designed for very arduous applications as, thanks to its high torque and high-performing winch, it is capable of reaching great depths, also with great diameters...

CHAIN WRENCH, GEAR WRENCH, MDL. J778 / MJ156, size 15 1/2S

CHAIN WRENCH, GEAR WRENCH, MDL. J778 / MJ156, size 15 1/2S

CHAIN WRENCH, GEAR WRENCH, MDL. J778 / MJ155, size 15 1/2S

CHAIN WRENCH, GEAR WRENCH, MDL. J778 / MJ155, size 15 1/2S

KITAGAWA UPR450U EXTENDED STROKE AIR CHUCK

• Manufacturer: Kitagawa

Clamping stroke per jaw 0.55”, 14mm This chuck was on short term loan until a special-order chuck arrived. KITAGAWA UPR450U EXTENDED STROKE AIR CHUCK

ROHM STANDARD STROKE AIR CHUCK

• Manufacturer: Röhm

We reassembled the chuck with NEW O-rings and any other parts required and checked the chuck under pressure in the open and closed position overnight to make sure it was holding air.

SMW BB400-140SS

• Manufacturer: SMW

Air Distributor Ring A11 Adapter plate O.d.: 16” | I.d: 5.5” | Max rpm: 1600 | Jaw stroke: .27” | Weight: 340lbs

SEOAM 40” 3-JAW HYDRAULIC CHUCK

• Manufacturer: SEOAM

SEOAM 40” 3-JAW HYDRAULIC CHUCK Spindle nose: Flat back | Jaw stroke: 30 mm, | Plunger stroke: 57 mm | Maximum gripping diameter: 1000 mm | Minimum gripping diameter: 330 mm | Maximum input force: 161 KN, (16450 ...

SCHUNK ROTA-S PLUS MANUAL 3-JAW CHUCK

• Manufacturer: Schunk

SCHUNK ROTA-S PLUS MANUAL 3-JAW CHUCK (Quick change jaw system)

Autoblok 3 Jaw Hydraulic Chuck

• Manufacturer: Autoblok

Model 315 GHN Chuck O.D. 12" Chuck I.D. 3.75" Chuck Mount A-11 (7.75" back taper bore) Master Jaws Fine Serrations

CONTRACTOR BOX, KOBALT MDL. KB32

CONTRACTOR BOX, KOBALT MDL. KB32

CHAIN TONGS, WILLIAMS, MDL. CT-14, 1-1/2" - 8" cap.

CHAIN TONGS, WILLIAMS, MDL. CT-14, 1-1/2" - 8" cap.

MANUAL TUBING TONG, AOT, MDL. K30, 5,000 FT PD CAP.

MANUAL TUBING TONG, AOT, MDL. K30, 5,000 FT PD CAP.

MANUAL TUBING TONG, AOT, MDL. K30, 5,000 FT PD CAP.

MANUAL TUBING TONG, AOT, MDL. K30, 5,000 FT PD CAP.

SMW BB N 500-230-3 STANDARD STANDAR STROKE AIR CHUCK

• Manufacturer: SMW

position to assure it holds pressure. for a front mounted chuck or stand-off brackets for a rear mounted chuck. We also supply adapter plates and can do the complete installation if required. SMW BB N 500-230-3 ...

Haas DM-2 Machining Center

• Manufacturer: Haas
• Model: DM-2

Good condition Haas DM-2 Machining Centers available between 1989 and 1996 years. Located in USA and other countries. Click request price for more information.