Used Tin Knocker Machine Tools in Texas, USA

NEW TIN KNOCKER PITTSBURGH TK AIR HAMMER
- Manufacturer: Tin Knocker
Closes up to 16 Gauge sheet metal pittsburgh. Built to exact specifications. Precision machined parts from cast steel and aluminum - heat treated for longevity.
Ennis, TX
NEW TIN KNOCKER TK 1016 NOTCHER
- Manufacturer: Tin Knocker
- Model: TK1016
TK 1016 Notcher Specifications: Weight: 880 lbs Dimensions: 79 x 36 x 36 in Capacity: 16 – 28 gauge mild steel No. Notching Heads: 3 V and 2 corner, for 5 total. V Notch. 1 ½” max Motor: 3 HP Electrics: Dual Volt...
Ennis, TX
NEW TIN KNOCKER TK EDGE NOTCHER
- Manufacturer: Tin Knocker
TK Edge Notcher Specifications: Motor: 1/3 HP Electrics: 110V/1PH/60Hz AC Depth of Notch: 0 to 3/4"Width of Notch: 3/16"Spacing: 3/4" to 1-7/16"Speed: Variable Minimum 18 FPM Approx. Overall Dimensions: 26"x16.5"...
Ennis, TX
NEW TIN KNOCKER TK DRIVE CLEAT NOTCHER
- Manufacturer: Tin Knocker
TK Drive Cleat Notcher Specifications: Capacity: 22-gauge mild steel sheet metal Machine Dimension: 21” x 4” x 10”Shipping Dimension: 11” x 4” x 6”Approximate Weight: 18 lbs.
Ennis, TX
NEW TIN KNOCKER HYDRAULIC CORNER NOTCHER
- Manufacturer: Tin Knocker
Blade to apex to front of table: 9 inches Capacity in mild steel: 14 gauge | Maximum notch in one cut: 6” x 6” | Tab capacity in mild steel: 1” in 16 gauge | Throat depth: 6-3/4 inches | Height (overall): 55 inch...
Ennis, TX
NEW TIN KNOCKER TK 1655 NOTCHER - MANUAL
- Manufacturer: Tin Knocker
- Model: TK1655
TK 1655 Manual Notcher Specifications: Blade Length: 5"Angle: 90 Degrees **Optional Stand Available
Ennis, TX
NEW TIN KNOCKER CIRCLE SHEAR
- Manufacturer: Tin Knocker
Capacity mild steel: 16 ga. Capacity stainless: 20 ga. Circle diameter: 3”-42” Diameter of cutters: 2” Maximum flange depth: 3” Depth head throat: 10” Depth of tail stock: 5 – 1 Horsepower: 1/3 HP Cutter speed: 1...
Ennis, TX
NEW TIN KNOCKER 2 N 1 CRIMPER
- Manufacturer: CRIMPER BEADER
The machine is easily portable and performs both beading and crimping sequentially in one setup. All operations and setups are performed without the use of tools and all adjustment knobs are captive. No parts can...
$1,250 USD
Ennis, TX
NEW TIN KNOCKER TK 18 STATION TURRET PUNCH
- Manufacturer: Tin Knocker
- Model: TK18
TK 18 Hand Turret Punch Specifications: 8 Tons Throat Depth: 18"Tooled Stations: 18Punch Range: 1/8" - 2 1/4"Punch Sizes: .1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1 1/8", ...
Ennis, TX
NEW TIN KNOCKER HM MB 1300H, 20GA X 50" STRAIGHT BRAKE (CLAW FOOT NOSE BAR)
- Manufacturer: Tin Knocker
The model mb 1300h is easy to operate. Light weight but strong. These manual machines are particularly suited for folding thin sheet metal. The mb 1300h brake comes with floor mounting legs as standard. The machi...
Ennis, TX
NEW TIN KNOCKER TK 724 COMBINATION MACHINE
- Manufacturer: Tin Knocker
- Model: TK724
TK 724 Combination Machine Specifications: Throat: 7"Includes: 5 Sets of Rolls and Gauge For: Ogee Bead, Crimping, Wiring, Burring, & Turning, & C- Clamp Pedestal Stand Dimensions: 26"x16"x12"Weight: 55 lbs 724 C...
Ennis, TX
NEW TIN KNOCKER TK JACKETING SHEAR
- Manufacturer: Tin Knocker
TK Jacketing Shear Specifications: Maximum Sheet Width: 48"Table top height or working surface height: 34"
Ennis, TX
NEW TIN KNOCKER GANG SLITTER
- Manufacturer: Tin Knocker
Life lubed bearings 3” cold rolled polish shafts 2 sets of reversible knives Heavy duty chain drive Stripper fingers to prevent twist Operating Speed: 60 FPM ¾ HP, 110/220V, 1 Phase Motor Tool steel blades with s...
Ennis, TX
NEW TIN KNOCKER TK LETTER BRAKE
- Manufacturer: Tin Knocker
TK Letter Brake Specifications: Capacity: 20 Ga Mild Steel Approx. Dimensions: 48”x48”x46”Approx. Footprint: 25”x22”x42”Weight: 190 lbs. letter brake, cross brake, hand brake, leaf brake, apron brake, straight br...
Ennis, TX
NEW TIN KNOCKER TK 1652 FOOT SHEAR
- Manufacturer: Tin Knocker
- Model: TK1652
TK 1652 Foot Shear Specifications: Capacity: 16 Ga Mild Steel Sheet Metal Shearing Length: 52"Back Gauge: 25" with Engraved Rule Floor Space: 60" x 72"Dimensions: 60"L x 34"W x 42"HWeight: 1215 lbs.
Ennis, TX
Tin Knocker TK18 Punch Machine
- Manufacturer: Tin Knocker
- Model: TK18
Good condition Tin Knocker TK18 Punch Machines. Located in USA and other countries. Click request price for more information.
USA