Used threading

2" (51 MM) DIA. JONES & LAMSON THREAD & FORM GRINDER, USED BAR GRINDERS
- used
- Manufacturer: Jones & Lamson
Inventory id: 10762600000 | Bar dia max: 2" DIAMETER | Model no.: 410 | Material ( steel grades,brass ,copper): STEEL | Bar dia min: 0.375 | Bar length: 7 | Spindle mtr hp: 0.75 | Spindle motor rpm: 3500 | Spind...
Pittsburgh, PA
Cincinnati Engine Lathe, LR, 36" x 216", 27" SOC, 640 RPM, (2) Steady Rests, Threading
- used
- Manufacturer: Cincinnati
- Model: LR
Swing over bed ways: 36" | Swing over cross slide: 27" | Distance between centers: 216" | Spindle drive motor: 10 HP | Spindle speeds: 16-640 RPM | Spindle bore: 2.5" | Chuck: 24" 4 Jaw | Equipped with:: (2) Ste...
Michigan, USA
Trusted Seller
1995 DRAKE XLO 39
- used
- Manufacturer: Drake
- Weight: 8,000#
Specifications: Ball Diameter: .01-2" Ball Diameter: .5" - 2" Lead per Thread: .0001-5" Work Cycle: 50-200 Roll Diameter: 2-6" Ball Trade: +/- .001 Approximate Weight:8,000 lbs.
Warren, MI
Trusted Seller
1995 DRAKE XLO 39
- used
- Manufacturer: Drake
- Weight: 8,000#
Specifications: Ball Diameter: .01-2" Ball Diameter: .5" - 2" Lead per Thread: .0001-5" Work Cycle: 50-200 Roll Diameter: 2-6" Ball Trade: +/- .001 Approximate Weight: 8,000 lbs
Warren, MI
Trusted Seller
1995 DRAKE XLO 39
- used
- Manufacturer: Drake
- Weight: 8,000#
Specifications: Ball Diameter: .01-2" Ball Diameter: .5" - 2" Lead per Thread: .0001-5" Work Cycle: 50-200 Roll Diameter: 2-6" Ball Trade: +/- .001 Approximate Weight: 8,000 lbs Dimensions: L=108" W=78" ...
Warren, MI
Trusted Seller
DRAKE XLO 39
- used
- Manufacturer: Drake
- Weight: 8,000#
Specifications: Ball Diameter: .01-2" Ball Diameter: .5" - 2" Lead per Thread: .0001-5" Work Cycle: 50-200 Roll Diameter: 2-6" Ball Trade: +/- .001 Approximate Weight: 8,000 lbs Space L=108" W=78" H=90"
Warren, MI
Trusted Seller
DRAKE XLO 39
- used
- Manufacturer: Drake
- Weight: 8,000#
Specifications: Ball Diameter: .01-2" Ball Diameter: .5" - 2" Lead per Thread: .0001-5" Work Cycle: 50-200 Roll Diameter: 2-6" Ball Trade: +/- .001 Approximate Weight: 8,000 lbs. SPACE L=108" W= FOB TRUCK WARRE...
Warren, MI
Trusted Seller
1980 Matrix No 47 M/C, TYPE 7, MAC 5599, NEW 1980
- used
- Manufacturer: Matrix
MATRIX THREAD GRINDER, NEW 1980 MODEL: 47 M/C TYPE: 7 MACHINE #5599 TAH1227 SPECIFICATIONS: SWING OVER TABLE WAYS:.......... 16" DISTANCE BETWEEN CENTERS:....... 42" MAX. GROUND LENGTH:............. 40" MAX...
Harrison, NJ
1985 MITSUI SEIKI GSN-300
- used
- Manufacturer: Mitsui Seiki
- Weight: 10,000 LBS
1985 Mitsui Seiki GSN300 CNC Thread Grinder with Fanuc 11M CNC Control, Mac Oil Chiller, and Coolant System. 10.6" Swing x 11.8" Grind Length.
Phoenix, AZ
Trusted Seller
2003 VOUMARD CNC 300
- used
- Manufacturer: Voumard
- Model: CNC 300
- Weight: 1,100
Voumard 300 CNC Universal ID/OD CNC Grinder Equipped with: Full Enclosures Siemens CNC Control MORE ABOUT THIS MACHINE: The Voumard 300 CNC Large Capacity Production Center Grinder Grinding of short workpiec...
United States
Trusted Seller
(10) LEMPCO GRINDING WHEELS HUBS. #0312521
- used
- Manufacturer: LEMPCO
Thread diameter: 2"
Toledo, OH
Trusted Seller
CINCINNATI #17 LR HYDRASHIFT #0555025
- used
- Manufacturer: Cincinnati
- Model: LR
QUICK CHANGE TOOL POST 10" 3-JAW CHUCK INCH THREADING
Toledo, OH
Trusted Seller
JAINNHER JHT-4010CNC Thread Grinding Machine
- new
- Manufacturer: JAINNHER
- Grinding Length: 1000mm
JAINNHER JHT-4010CNC Thread Grinding Machine. A hydrostatic guideway system with fast movement, low noise, and low vibration provides high performance and superior accuracy compared to traditional linear and boxw...
Erith, United Kingdom
Trusted Seller
1986 DoAll-Romi 1340
- used
- Manufacturer: DoAll
- Model: 1340
- Weight: 2,500 LBS.
13” X 40” DOALL-ROMI ENGINE LATHE MODEL: 1340, S/N: 0257997-163, NEW: 1986 SPECIFICATIONS: SWING OVER BED ................... 13" SWING OVER CARRIAGE WINGS ........ 11-3/8" DISTANCE BETWEEN CENTERS ......... 40" ...
$5,950 USD
Get financing
Est. $117/mo
Harrison, NJ
Trusted Seller
2000 Studer S145
- used
- Manufacturer: Studer
- Model: S145
Capabilities and Features C-Axis for Form & Thread Grinding / Q-Axis for Swivel of head / 4-Position Internal Grinding Spindles Workpiece Envelop 19.700″ x 4.700″ OD Grinding Wheel Dimensions-10″ x 1″ Workload 17...
$99,900 USD
Get financing
Est. $1,880/mo
Chicago, IL