Osborn 730 RJWA Ram Jolt Molding Machine
used
- Manufacturer: Osborn
Osborn 730 RJWA Ram Jolt Molding Machine Equipped with Shuttle System
- Trusted Seller
GFM SX 06 Radial Forging Machine
used
- Manufacturer: GFM
Forging force: 80 Ton | Number of hammers: 4 | Number of strokes per minute: 1,200/minute | Range of shift on diameter: 35 mm | Forging eccentric: 3 mm | Firing hammer length: 150 mm | Basic material maximum dia...
Marietta, GA - Trusted Seller
H280/V180 – 3500 Ring Rolling Machine
used
Outside diameter of finished ring: 600 - 3,500 mm | Height of finished ring blank for mandrel diameter 2,200 mm: 100 - 800 mm | Height of ring blank (min / max): 240 / 800 mm | Ratio of wall thickness to height:...
Marietta, GA - Trusted Seller
Kaltek 6300 Ring Rolling Mill
used
- Manufacturer: Kaltek
Outside diameter of finished ring: 1,200 - 6,300 mm | Height of finished ring: 80 - 1,000 mm | Inside diameter of ring blank for mandrel diameter - 300mm: min 320 mm | Height of ring blank: max 1,050 mm | Ring w...
Marietta, GA - Trusted Seller
4" National Upset Forging Machine - Re:24376
used
- Manufacturer: National
Equipped with Air Clutch & Brake The machine is available for inspection at our Cleveland, Ohio warehouse on request.
Rockville Centre, NY - Trusted Seller
1995 740 ton AMD model 740-2630 Bar & Billet Shear,
used
- Manufacturer: AMD
Bar dia: 156 mm | Max sqr: 137 mm | Model #: 740-2630 | Force: 671.3 tonnes | Ram stroke: 457 mm | Net weight: 16,783 kgs
Rockville Centre, NY - Trusted Seller
3,500mm Asian Built Radial Axial Ring Rolling Mill Re:24925
used
- Manufacturer: Asian Built
Dia: 3,500 mm | Height: 800 mm | Builder: Asian Built | Radial: 280 tonnes | Axial: 180 tonnes | Min dia: 650 mm | Number of main roll motors, current type & power of each: One DC @ 500kW | Number of axial roll ...
Rockville Centre, NY - Trusted Seller
9" National High-Duty Heavy Upset Forging Machine (Upsetter) - has never been cracked, Re:24440
used
- Manufacturer: National
Location: Our Cleveland, Ohio Rebuild Facility - in storage and available for inspection. Very good working condition
Rockville Centre, NY - Trusted Seller
6000mm dia Kaltek Ring Rolling Mill, 80~1100 Ring Height
used
Additional info: Replacement of PLC Control system, PLC Main panel & Operator's panel to brand new Siemens S7-400 Upgrade of Hydraulic system Replacement of packing and seals Replacement of bearings Current Volta...
Rockville Centre, NY - Trusted Seller
2012 INDUCTOTHERM VIP POWER TRAK
used
- Manufacturer: Inductotherm
Inductotherm VIP Power Trak, 75 KW, 3200 HZ, 100 Lift Swing
Ohio, USA - Trusted Seller
2005 INDUCTOTHERM VIP POWER TRAK 750-10CR
used
- Manufacturer: Inductotherm
Inductotherm Induction Melting Furnace, VIP Power Trak 750-10CR, 750 Kw, 1200 Hz, 6000 Lb Duraline Hydraulic Tilting Box
Stow, OH - Trusted Seller
Ring Rolling Machine HBE
new
- Manufacturer: HBE
Dia : 4000 mm, Height : 1000 mm, Radial : 250 tons, Axial : 200 tons, Min dia : 400 mm, Min ring height : 100 mm, Main roll dia : 820 mm, Main roll height : 1095 mm, Axial rolls angle of cone : 35º, Numb...
United States - Trusted SellerAuction
Newton, NJVisit Auction Website - Trusted Seller
Ring Rolling Machine B-100H
used
- Manufacturer: Ungerer/Schnutz/Irle
Minimum I.D. : 203.20 mm, O.D. Range : 431.80 mm, 660.40 mm & 1016 mm, Maximum O.D. with 3-Roller Bending : No Limit, Face Plate Rotations : 2/3/5 RPM, Capacities - : Flat on Flat : 44.45mm x 12.70mm to 203...
United States - Trusted SellerAuction
Newton, NJVisit Auction Website
Tip: Enter manufacturer, model or keyword