Used Machine Tools in Ukraine

1980 KALININ K3535A,315t Double-crank sheet stamping press
- Manufacturer: Kalinin
Capacity (ton): 315 | Table size, mm: 2500 x 1250 | Slider stroke, mm: 400 | Shut height,mm: 750 | Strokes per min: 25 | Press weight, kg: 50900
Ukraine
Eccentric shaft for hot stamping press 1600T NKMZ K04.038.842
- Manufacturer: NKMZ
Eccentric shaft by drawing K04.038.842-22-402 for hot stamping press K04.038.842 (K8542), 1600T brand new in state stale from stock W 4675 kg
Ukraine
Kramatorsk 16T FORGING HAMMER RAM
- Manufacturer: Kramatorsk
Weight 11.3t Weight: 11.3t
Ukraine
1980 ERFURT PKZZ 250 Double-crank sheet stamping press
- Manufacturer: Erfurt
- Model: PKZZ
Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing for...
Ukraine
1974 TMP K3540 1000TN Sheet stamping press
- Manufacturer: TMP
Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 B...
Ukraine
1985 TMP KA9536,400TN Mechanical trimming press
- Manufacturer: TMP
Maximum force ton-force 400 Slider stroke length mm 400 Slider strokes per minute 25 Maximum distance between table and slider (in lower position of slider) mm 470 Size of adjustment of distance between down-stam...
Ukraine
Spare parts for hammers from 1 to 5 tons
- Manufacturer: Spare parts
Spare parts for hammers from 1 to 5 tons falling parts, rods, die blocks and more
Ukraine
1980 VORONEZH M1343A 2T Open die forging hammer
- Manufacturer: Voronezh
IMPACT ENERGY, KJ 50 NOMINAL WEIGHT OF FALLING PARTS, KG 2000 MAX NUMBER OF BLOWS PER MINUTE 56 WORKING ZONE DAYLIGHT, MM 530 DISTANCE BETWEEN COLUMNS, MM 2360 DIE IMPRESSION SIZE, MM 530 x 300 STEAM PRESSU...
Ukraine
1980 SMERAL LKM 4000 Hot stamping press
- Manufacturer: Šmeral Brno
- Model: LKM 4000
-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 ...
Ukraine
1976 STANKO MA417 (750kg) Pneumatic air forging hammer
- Manufacturer: Stanko
- Model: MA417
Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunge...
Ukraine
1975 NKMZ 6300TN ( K8548) Hot forging press
- Manufacturer: NKMZ
Nominal force: 6300 ton Number of continuous strokes per minute: 40 Ram stroke: 460 mm Distance between ram and table (table is in upper position): 1150 mm Table adjustment: 15 mm Distance between press columns: ...
Ukraine
1985 SMERAL LL2000 - 2000 ton Knuckle joint press
- Manufacturer: Šmeral Brno
Nominal forming force 2000 tons Stroke 150 mm Grip 700 mm Ram reset 15 mm Number of strokes 1/min 32 Number of utilizable strokes 1/min 18 Pass 1120 mm Bed size 1100 x 1100 mm Ram size 850 x 850 mm Press...
Ukraine
1985 TMP KV2542,1600T Closed single-crank trimming press
- Manufacturer: TMP
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under...
Ukraine
1961 Barnaul K846B 800TN Knuckle joint press
- Manufacturer: Barnaul
Pressure: 800 tons Number of strokes per minute: 45 Slide stroke: 160 mm Adjustment of rod length: 15 mm Closed height: 630 mm Table size: 860х860 mm Max. distance between table and slide in its lower posit...
Ukraine
1985 TMP K4040, 1000T Closed four-crank sheet stamping press
- Manufacturer: TMP
Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Ad...
Ukraine