Used Machine Tools in Ukraine

1980 SMERAL LKM 4000 Hot stamping press
- Manufacturer: Šmeral Brno
- Model: LKM 4000
-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 ...
Ukraine
1976 STANKO MA417 (750kg) Pneumatic air forging hammer
- Manufacturer: Stanko
- Model: MA417
Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunge...
Ukraine
1975 NKMZ 6300TN ( K8548) Hot forging press
- Manufacturer: NKMZ
Nominal force: 6300 ton Number of continuous strokes per minute: 40 Ram stroke: 460 mm Distance between ram and table (table is in upper position): 1150 mm Table adjustment: 15 mm Distance between press columns: ...
Ukraine
1985 SMERAL LL2000 - 2000 ton Knuckle joint press
- Manufacturer: Šmeral Brno
Nominal forming force 2000 tons Stroke 150 mm Grip 700 mm Ram reset 15 mm Number of strokes 1/min 32 Number of utilizable strokes 1/min 18 Pass 1120 mm Bed size 1100 x 1100 mm Ram size 850 x 850 mm Press...
Ukraine
1985 TMP KV2542,1600T Closed single-crank trimming press
- Manufacturer: TMP
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under...
Ukraine
1961 Barnaul K846B 800TN Knuckle joint press
- Manufacturer: Barnaul
Pressure: 800 tons Number of strokes per minute: 45 Slide stroke: 160 mm Adjustment of rod length: 15 mm Closed height: 630 mm Table size: 860х860 mm Max. distance between table and slide in its lower posit...
Ukraine
1985 TMP K4040, 1000T Closed four-crank sheet stamping press
- Manufacturer: TMP
Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Ad...
Ukraine
1967 TMP VORONEZH K2543,2000T Closed single-crank press line for deep drawing
- Manufacturer: Voronezh
- Model: K2543
Maximum force: 2000 tons Slider stroke length: 500 mm Number of courses of a slider per minute: 6 Number of single turn-on: 3.6 The closed height: 1160 mm Adjustment: 220 mm Table size: -From left to right...
Ukraine
1983 TMP VORONEZH KV 2536 400T Mechanical stamping trimming press
- Manufacturer: Voronezh
Effort , 400T Slider stroke, mm: 250. Frequency of move slider, 1/min: 25. The distance between the table and slider mm,510 Adjustment mm,160 Table, mm: 1000x1000. Power: 43,3 kW. Press overall dimensions mm - le...
Ukraine
1967 ERFURT PKZ (I) 1250/1600 Closed single-crank press line for deep drawing
- Manufacturer: Erfurt
Capacity, ton 1250 Stroke, mm 500 Maximum drawing depth,mm 200 Min number of no-load stroke: 14 /per min Slider adjustment, mm 315 Max. shut height between bolster plate and slider (stroke down, adjustment u...
Ukraine
1975 Kramatorsk 18KP 10t air steam die forging hammer
- Manufacturer: Kramatorsk
Capacity :10 tons, Weight of falling part, nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows...
Ukraine
1975 Kramatorsk 17KP (MFP 5000KG) air steam die forging hammer
- Manufacturer: Kramatorsk
Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full succ...
Ukraine
1982 TMP VORONEZH K504.003.844, 2500TN KNUCKLE JOINT PRESSES
- Manufacturer: Voronezh
- Stroke length: 190 millimeter
- Shut height: 800 millimeter
(analogue of KB8344) Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15
Ukraine
1975 TMP VORONEZH K8544,2500T Hot stamping press
- Manufacturer: Voronezh
- Model: K8544
RATED CAPACITY TN 2500 INTERMEDIATE SHAFT YES CONNECTING ROD N° 1 SLIDE STROKE MM 350 CONTINUOUS STROKE PER MINUTE N° 60 SINGLE STROKE PER MINUTE N° 14 DIE SPACE MM 890 DIE SPACE ADJUSTMENT IN THE TABLE MM 10 TAB...
Ukraine
1990 KUZLITMASH KD9536,400TN Mechanical trimming press
- Manufacturer: KUZLITMASH
Maximum force ton-force 400 Slider stroke length mm 400 Slider strokes per minute 25 Maximum distance between table and slider (in lower position of slider) mm 470 Size of adjustment of distance between down-stam...
Ukraine