Used Rolling Mills (Metalworking)

76” WIDE x .500” THICK CAUFFIEL FLATTENER W/PINCH ROLL (USED)

• Manufacturer: Cauffiel

Variable Speed 150 FPM All Rolls Driven w/Universals Hydraulic Motor Adjustable w/Indicator Enclosed Gears Running in Oil Three-Speed Gearbox w/DC Drive

2025 CARELL 306-HV ANGLE ROLLS [RQ-300026]

• Manufacturer: Carell

CARELL 306HV Double Pinch Hydraulic Angle Roll Model 306 is a 3 driving roll, double initial pinch universal roll bending machine with independent hydraulic adjustment of both lower rolls and variable speed hydr...

Raymond 5057 High Side Roller Mills

• Manufacturer: Raymond
• Model: 5057 HIGH SIDE

View Spec Sheet Below Discharge size: 10%R2000 micron (90% minus 10 mesh) to as fine as 0.002%R44 micron (99.998% minus 325 mesh) | Style: Vertical Roller Mill | Mill size: 50in Diameter (1270mm) | Roller: 5 Roll...

Syncro Tension Stand, Monarch Stamco (Used)

• Manufacturer: Stamco

Manufacturer: Stamco The line this tension stand came out of was running .015"-.135" gauges. This does not mean the tension stand is limited to these gauges. Gauge capacities should be confirmed. Two sets of ...

44" HAZELETT STRIP CASTER (USED)

• Manufacturer: Hazelett

Manufacturer: Hazelett Model: 14 Year Installed: 1970 Upgrades (1991) 1) Modified with Steam Heat for Belt Stabilization 2) Neutral Steering 3) Solid State AB Drives 4) Computer Control and Data Acquisitio...

6" x .250" Yoder Edging Line (Used, Refurbished)

• Manufacturer: Yoder

Specifications: Manufacturer: Yoder Width Capacity: 6" Max Gauge: .250" *Refurbished in 2021 Line Includes: #1 Mill Stand, 2HI 1st Set of Edging Passes #2 Mill Stand, 2HI Flattener Decambering Unit #3 Mill ...

Snub Roller Used)

Pbr roof panel machines

• Manufacturer: Pbr roof panel machines

Pbr roof panel machine - 20'stands - Chain drive - 4 Post pre shear - Motor sizes pre shear 4hp 240 v3 ph hz - Main motor 7.5hp 240 v 3ph 60hz - Tolling heat treated hard chromed rollers - Computer controls read...

ROOF TILE SHINGLES 13 1/4 IN X 39 3/8 IN (600 LINEAR FT) T183647

Extra Information Brand: Unbranded MPN: Does Not Apply Shipping Weight: 335 LBS Shipping Dimensions: 33 (in) × 49 (in) × 13 (in)

8" x 15" Farrel, 2-Hi Rolling Mill, Chrome rolls

• Manufacturer: Farrel

The FARREL 2 Roll Mill is a high-quality rubber roll mill designed and manufactured by FARREL in the United States.

Mill, Roll, 4" X 8", Kent, 1 HP, 3 Roll, #S742517

• Manufacturer: Kent

Kent Machine Works, 3-Roll mill, 4" diameter x 8" face, cored, mild steel rolls with 1 Hp Explosion Proof drive. Mill has manual roll sets for front and back rolls, complete with discharge apron. Drive is rated 2...

Mill, Roll, 14" X 30", JH Day, 25 HP, 3 Roll, #S742516

• Manufacturer: JH Day

JH Day, 3-Roll Mill, Model AN 08602, complete with 14" diameter x 30" face cored mild steel rolls. Mill has hydraulic roll sets for front and back rolls, complete with apron discharge. Mill has Explosion Proof 25...

Mill, Roll, 10" X 22", JH Day, 10/5 HP, 3 Roll, #S504600

• Manufacturer: JH Day

J.H. Day 10" x 22" 3-Roll Mill - High-performance mill powered by a two-speed 10/5 HP motor. Features manually adjustable rolls and is offered without guides or an apron. Rolls have not been reground (Serial #426...

Mill, Roll, 2.5" x 7", 3-Roll, C/st, Douglas Aircraft #S744514

• Manufacturer: Sturtevant
• Model: 3B

Douglas Aircraft 3-Roll Mill, includes 2-1/2" Diameter X 7" Face Mild Steel Rolls. Manual spacing adjustment on rolls. Unit includes apron discharge, end plates and electrical panel. Driven by 3/4 HP, 220/440 Vol...

Mill, Roll, 3-3/4" X 8", Kent, 3-3/4" X 8", 3 Roll #Z506580

• Manufacturer: Kent

Kent Roll Mill. Compact 3-roll unit with manual adjustment. Measures 3-3/4" x 8". Lacks motor but is water-cooled for precise operation.