Used Rolling Mills (Metalworking)

WATERBURY FARREL SENDZIMIR COLD STRIP MILL (USED)

• Manufacturer: Waterbury Farrel
• Model: ZR23-25

Manufacturer: Waterbury Farrel Model: ZR-23-25 Recoiler Motors: Rewind Set-Up Armature Volts 300 Armature FL Amps 520 Full Field Amps 16 RPM 365/650 Horsepower Max 180 150 HP, 250 Volts, 520 Amps, 300/60...

1830MM (72") Meco 2-HI Temper Mill (Used)

• Manufacturer: Meco

Mechanical Specifications: GENERAL SPECIFICATIONS: MANUFACTURER: MECO MATERIAL: MILD STEEL NUMBER OF STANDS: 1 CONFIGURATION 2 HIGH, NON REVERSING HOUSING POST SIZE: 28" X 18" (710 MM X 460 MM) HOUSING CRO...

56´´ MESTA 5 STAND 4-HI TANDEM COLD MILL (USED)

• Manufacturer: Mesta

Charge Limits: Delivered Limits: Tin: Width: 45" (1143 mm) to 18" (457 mm) Gauge: .0240" (0.61 mm) to .0071" (0.18 mm) Weight: 36,000 Lbs. (16,329 kg) to 2,000 Lbs. (907 kg) Maximum O.D.: 68" (1727 mm) Maximum I....

4-1/2" NASH 2-HI TEMPER MILL (USED)

• Manufacturer: Nash

Manufacturer: Nash Width: 4"-12" 2-HI

53´´ (1346mm) 4 STAND CONTINENTAL 4-HI TANDEM MILL (USED)

Entry Thickness: .050" (1.3mm) Minimum - .180" (4.6mm) Maximum Exit Thickness: .020" (0.5mm) Minimum - .080" (2mm) Maximum Coil OD: 50" (1270) Minimum - 72" (1829mm) Maximum PIW: 428 Minimum - 1025 Maximum 5% - 7...

24´´ WIDE WATERBURY FARREL SINGLE STAND 4-HI MILL (USED)

• Manufacturer: Waterbury Farrel

200" Max Gauge (5 mm) 47" O.D. (1190 mm) 16" I.D. (406 mm) 5700 Lbs Coil Weight (2610 Kgs) 20" I.D. (508 mm) 850 RPM Combination Pinion Gearbox: 12:1 Ratio

6" X .340" Coil to Coil Edging Line and 2HI Temper Mill (Used)

6" Coil to Coil Edging Line Thickness Range: .020" - .340" Coil Width: 6" -1" Coil Capacity: 6,000# Coil ID: 20" Coil OD: 72" Line Speed: 285 FPM Edging #5 Deburred & #4 Full Round Complete Line with: Ma...

72" WIDE DANIELI WEAN PUSH PULL PICKLE LINE WITH MECO TEMPER MILL (USED)

• Manufacturer: Danieli

ENTRY COIL CAR (PIT/ ABOVE GROUND): PIT - (NOT AVAILABLE) NUMBER OF ENTRY REELS: 1 - STUB ARBOR TYPE ENTRY REEL MANDREL DIA (EXPANDING/SLEEVE): 22.75" - 27.50" MATERIAL: MILD STEEL-80,000 PSI YIELD ADDITIONAL COM...

PINCH ROLLS, ROLLSTAR (USED)

• Manufacturer: Rollstar

Roll diameter: 29-3/4" O.D. x 33" Face

53" Hunter Twin Roll Machine

Specifications: Quantity: 2 Un Exit Thickness: 6 - 9 mm Min Width: 690 mm Max Width: 1360 mm Max Exit OD: 1615 mm Exit ID: 608mm Max Speed: 1,1mpm Capacity: Coils/Day/Caster: 5 Avg Coil Weight (MT): 5 ...

65" Lauener Twin Roll Machine

Specifications: Quantity: 2 Units Exit Thickness: 6 - 9mm Min Width: 690 mm Max Width: 1660 mm Max Exit OD: 1615 mm Exit ID: 608mm Max Speed: 1,1mpm Capacity: Coils/Day/Caster: 5 Avg Coil Weight (MT): 5...

Peeler/Pinch Roll Unit, Loopco

• Manufacturer: Loopco

48" Memco Embossing Stand with Rolls (Used)

• Manufacturer: Memco

Manufacture: Memco New: 1981 Strip Width: 48" max typical / 1219mm 50" roll face / 1270 mm Strip Thickness: .060" max aluminum (typical) / .040" steel (typical) Coil Size: ID - 16-21" Embosser: Drawings included ...

5 ROLL WEAN DANIELI FLATTENER (USED)

• Manufacturer: Danieli

5 Roll Flattener and pinch roll, includes intermediate gear box and final dive gear box w/ 200 HP DC Motor

Bertsch 20-138" 4r Plate Roll - 20-138 4r

• Manufacturer: Bertsch
• Model: 20-138 4R

140" Max Length, 22" Top Roll Diameter, 22" Pinch Roll Diameter, 18" Side Roll Diameter, 75 Hp, 14 Fpm, If Interested 140" Max Length, 22" Top Roll Diameter, 22" Pinch Roll Diameter, 18" Side Roll Diameter, 75 Hp...