Used Tanks & Kettles in Germany

12220 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom material temperatur control system: AISI 304 (V2A) 1.4301

10468 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; smaller dents in the upper bottom; stated total height is estimated; foot ends were cut off during dismantling and ar...

44070 liter upright pressure-resistant storage tank made of stainless steel 304

• Manufacturer: Ziemann Holvrieka

Technical documentation: drawing,German Technical Supervisory Association TÜV documents

44480 liter Double-chamber storage tank, Aisi 316 (2x 22240 Liter)

• Manufacturer: Hinke

max. allowable working temperature: 100 °C remarks: Double-chamber storage tank divided into two 22.240 liter tanks; total height as per drawing, cylindrical height of each 22.240 liter tank as per drawing

Unused 10000 liter heat-/coolable pressure tank designed for cryogenic liquids, Aisi 304

max. allowable working temperature: 50 °C notice: some residues of previous content, dents at the cylinder remarks: Tank was designed as gas station for LNG but never used; though a bundled element in the middle ...

5000 liter heat-/coolable tank with 6.8 kW Ekato blade stirrer (ex-proof)

• Manufacturer: Ekato

max. allowable working temperature: 60 °C max. allowable working overpressure (dj): 10.0 bar max. allowable working temperature (dj): 60 °C Temperature control cylinder (dj): half-coil temperature control bottom ...

3x Tanks

3x Tanks ***Additional information available on request Not the machine you are looking for? Send us your requirements

540 Liter heat-/coolable pressure tank, Aisi 316

• Manufacturer: Diessel

max. allowable working temperature: 130 °C max. allowable working temperature (dj): 130 °C Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket notice: some residues of ...

39000 liters 3 chambers (3x 13000 liters) Storage tank made of stainless steel 316

• Manufacturer: Arsilac

remarks: All 3 chambers with their own manhole & outlet (disk tap)

Stainless steel tank 20 cbm, insulated, double jacket

• Manufacturer: Sielmann

Design: Cylinder, standing on a frame, 600 x 600 mm door, with conical bottoms, with double jacket around the cylinder and lower bottom, operating pressure 2 bar, insulation around the cylinder, bottoms, and fram...

650 Liter heat-/coolable pressure tank, Aisi 316

• Manufacturer: Precision Stainless

max. allowable working temperature: 148 °C max. allowable working overpressure (dj): 10.0 bar max. allowable working temperature (dj): 148 °C Temperature control cylinder (dj): double jacket temperature control b...

Stainless steel tank 5 cbm, insulated, double jacket

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, with curved bottoms. Double jacket around the cylinder and lower bottom, operating pressure 1.5 bar. Insulation around the cylinder and lower bottom, fully welded stainles...