Used Tanks & Kettles in Germany

25000 liter double chamber tank, Aisi 304 (2 x 12500 liters)

• Manufacturer: INOX - MAURER AG

max. allowable working temperature: 50 °C Volume: 25.000 liter | Stand type: legs | Quantity legs: 3 Piece | Diameter inside: 2.600 mm | Total height: 5.900 mm | Wall thickness bottom: 6.9 mm | Wall thickness cyl...

5050 liter aseptic pharma pressure tank, Aisi 316 (built 2016)

• Manufacturer: Möschle

max. allowable working temperature: 135 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents,statics,CE label and declaration of conformity,operation manual remarks: Manhole ...

Stainless steel tank 51.4 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 5 feet, height-adjustable, with conical bottoms, propeller agitator in the cylinder below, 3.0 kW, 710 rpm, double jacket around 1/2 cylinder and lower bottom, for 3 bar, 143 °C, ...

6050 liter coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; 2 feet padded (see photos) material temperatur control system: AISI 304 (V2A) 1.4301

17200 liter mixing tank, Aisi 304, with ex-proof 27 kW blade stirrer

• Manufacturer: Hagemann

max. allowable working temperature: 100 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: outlets partly cut off; one tank (internal no. 7083-2) with 1 dent in th...

Stainless steel tank 147.5 cbm

• Manufacturer: Sielmann

Design: cylindrical standing on a concrete base with upper conical base and lower inwardly curved conical base. Propeller agitator in the cylinder at the bottom. Insulation around the cylinder, cover made of full...

Stainless steel tank 82.7 cbm

• Manufacturer: Sielmann

Design: cylindrical, upright with flat bottom and conical top. Agitator with stabilizing ring installed diagonally in the cylinder, 5.5 kW, 955 rpm. Connections: 1 manhole 340 x 440 mm in the cylinder, 1 x DN 80 ...

Aventics 3513000000 Series AR1 Compressed Air Tank 10L 11 BAR

• Manufacturer: Aventics

The goods originate from a company liquidation and were temporarily stored in paternosters. Storage marks may appear. R14B2_EK BOR 5KG

Brand new 1050 liter heatable/coolable stainless steel 304 fermentation/storage tank

max. allowable working overpressure (dj): 6.0 bar Temperature control cylinder (dj): thermoplate

25000 liter triple walled storage tanks AISI 316 with fully a welded insulation jacket

• Manufacturer: Behälterbau Bader GmbH

max. allowable working overpressure (dj): 3.0 bar max. allowable working temperature (dj): 70 °C Temperature control cylinder (dj): half-coil temperature control bottom (dj): half-coil manhole: in the cylinder (a...

20000 liter mixing tank with side-mounted 16 kW Ystral yet-stream mixer

• Manufacturer: Ystral

remarks: 1 pipeline for cleaning in the upper cylinder area; screw-nuts of the cover screws welded; agitator was removed meanwhile and is enclosed loose agitator features: agitator motor with corrosion jet stream...

4000 liter horizontal storage tank with 2 mounted cross blade stirrers, Aisi 304

notice: some residues of previous content, manhole cover is missing remarks: bearer frame made of Fe; insulation jacket with dents and extensively nonexistent; manhole appr. 300 x 400 mm in one of the bottoms

10460 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; smaller dents in the upper bottom; smaller dents in the upper bottom; feet partially supported with stainless steel p...

13650 liter heat-/coolable cubic storage tank, Aisi 304 with 3 internal cooling plates

remarks: 3 cooling plates inside the tank (1 x loose, see photos); 1 manhole approx. 300 x 400 mm in the front bottom; smaller dents in the upper bottom material temperatur control system: AISI 304 (V2A) 1.4301

12280 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; slight differences in foot length (take into account during installation) material temperatur control system: AISI 30...