Building Filters
- Trusted Seller

Suss MicroTec Karl Suss MA8BA8 Mask Aligner Gen2 For Sale
- Manufacturer: SÜSS MicroTec
- Model: MA8/BA8
Suss MicroTec / Karl Suss MA8/BA8 Mask Aligner Gen2 8″ / 200mm Wafer Diameter Topside and Backside Alignment (BSA) Max. substrate thickness 6 mm; Mask size supported 63×63 mm; 102×102 mm; 127×127 mm; 178×178 mm; ...
Bree, Ireland - Trusted Seller

Suss MicroTec MA150e Automated Mask Aligner
- Manufacturer: SÜSS MicroTec
- Model: MA150e
Suss MicroTec MA150e Automated Mask Aligner Highly Accurate Lithography Solution For High-Volume Production The MA150e Gen2 platform is the industry standard for highly accurate lithography processes in very pric...
Bree, Ireland - Trusted Seller

Suss MicroTec MA150e Mask Aligner Lithography system
- Manufacturer: SÜSS MicroTec
- Model: MA150e
Bree, Ireland - Trusted Seller

Suss Microtec ACS 800 Coater Developer
- Manufacturer: SÜSS MicroTec
- Model: ACS 800
For full spec and Layout click on below Link TRACK_07 Coat chambers 2 ea Develop chambers 1ea Dehydration plate 1ea Hotplates 4ea
Trim, Ireland - Trusted Seller

Suss Microtec ABC 200 Wafer to Wafer Bonder
- Manufacturer: SÜSS MicroTec
- Model: ABC 200
Suss Microtec ABC 200 Wafer to Wafer Bonder Suss Microtec ABC 200 Wafer to Wafer Bonder for sale by Tarasemi.com. System is 100% complete including spare parts and is currently crated. Selling As Is. Contact gera...
Trim, Ireland - Trusted Seller

Lot of Control & Power Boards from 1996 Suss Microtec Falcon Polyimide Developer
- Manufacturer: SÜSS MicroTec
- Model: FALCON
Manufacturer Board Description Part Number Ericsson DC/DC Power Supply Board with PKA2232PI module, regulated ±15V and +5V outputs, used in semiconductor processing equipment PKA2232PI Lippert Automations-Techn...
Trim, Ireland - Trusted Seller

Suss Gamma photoresist and wet processing system with AltaSpray Spray Coater
- Manufacturer: SÜSS MicroTec
- Model: Gamma
The Gamma automated photoresist and wet processing system is designed to meet needs for clean, reliable and high throughput photolithography processing. The configuration is tailored to perform a variety of DUV p...
Bree, Ireland - Trusted Seller

KARL SUSS MA150 Mask Aligner
- Manufacturer: SÜSS MicroTec
- Model: MA150
KARL SUSS MA150 Mask Aligner 150mm / 6″ See photos Inspection Welcome – USA Contact Owner: Updated November 2019
Bree, Ireland - Trusted Seller

Seidel E5WKS-M310/22-PB Servo Drive Module – 3×220V, 22A, from Suss Microtec Falcon Developer
- Manufacturer: SÜSS MicroTec
Used Seidel E5WKS-M310/22-PB servo amplifier module, removed from a 1996 Suss Microtec Falcon polyimide developer. This unit is designed for precision motion control of 6–12 pole motors, commonly used for wafer s...
Trim, Ireland - Trusted Seller

Karl Suss MA24 Mask Aligner
- Manufacturer: SÜSS MicroTec
Karl Suss MA24 Mask Aligner Karl Suss MA24 mask aligner configured for simultaneous double side exposure and cassette to cassette handling of 4" wafers. Tool is equipped with diffraction reducing optical sys...
Trim, Ireland - Trusted Seller

Karl Suss MA56 Mask Aligners,
- Manufacturer: SÜSS MicroTec
- Model: MA 56
Karl Suss MA 56 Mask Aligners, new electronic control version. Set up for Deep UV and up to 4 inch Dia wafers and 5 Inch Diameter Masks Condition refurbished
Trim, Ireland - Trusted Seller

Karl Suss MA56 Mask Aligner
- Manufacturer: SÜSS MicroTec
- Model: MA56
Karl Suss MA56 Mask Aligner The Karl Suss MA 56 is a mask alignment and exposure system which offers unsurpassed, highly economical mass production capabilities for cassette to cassette handling of wafers up ...
Trim, Ireland - Trusted Seller

Suss MA 150M/BSA 4in and 6in
- Manufacturer: SÜSS MicroTec
- Model: MA150
1 pc. Mask Aligner MA 150 M/BSA Vintage 1996 but in very good condition, small used, still in clean room under production Equipped with 4” and 6” Proximity exposure, Soft-, Hard-, Vacuum- (and low vacuum) contact...
Trim, Ireland - Trusted Seller

Karl Suss MA150 Mask Aligner Stainless Steel Edition with BSA
- Manufacturer: SÜSS MicroTec
- Model: MA150
Manufacturer: Karl Suss Type: Mask Aligner Model: MA 150 BSA / Stainless Steel Year: Installed 2001/2002 Condition: As new - almost no use Currently set up with 2” & 4 "tooling Flat panel touchscreen controller...
Trim, Ireland - Trusted Seller

SussMicroTecMA8BA8Mask Aligner Gen3
- Manufacturer: SÜSS MicroTec
- Model: MA8/BA8
Suss MicroTec MA8/BA8 Mask Aligner Gen3 2-8” capable BSA capable 200-240V 50/60Hz Stereo optics w/ objectives MplanFl N 5x/0.15 Mplan N 10x/0.25 LMPlanFl N 20x/0.40 In excellent working condition. We can provide ...
Bree, Ireland 
SÜSS MicroTec ACS 200 Lithography (Photolithography)
- Manufacturer: SÜSS MicroTec
- Model: ACS 200
Good condition SÜSS MicroTec ACS 200 Lithography (Photolithography)s manufactured in 2009. Located in USA and other countries. Click request price for more information.
Europe
