Used Machine Tools in Indiana, USA

Hydraulic Press 20 Ton H Frame 120V Powered Pump Double Acting Cylinder

Used, in Good Working Condition. Look like it had light use. Very good condition. Rated for 1500 PSI. 20 ton 6" bore x 1500 psi = 42411 lbs of force 43" max vertical daylight. 15-3/4" stroke double acting cylinde...

Hydraulic 42 Ton Press 6" Stroke Punch Die 10Hp 230/460V 3Ph Parker Pump

• Manufacturer: Parker

Used, in Good Working Condition, Tested OK. 6" stroke. This is the max. Setup with limit switch. 6" bore Palm Controls to operate. Working area is 40" wide and 18" deep. Max height how it is setup is 15-3/4" heig...

Miller CP-200 Mig Welder 200 amp DC Arc S-52E Wire Feeder 230/460VAC 3PH

• Manufacturer: Miller
• Model: CP200
• Amperage: 200 ampere

Tested And Working. No Welding whip. Gas Regulator Included Miller S-52E 24V Wire Feeder .035 Drive Rollers Wired for 230V If this item ships as Flat Rate Freight please see details in Shipping tab

Miller CP-200 Mig Welder 200 amp DC Arc 10E Wire Feeder 230/460VAC 3PH

• Manufacturer: Miller
• Model: CP200
• Amperage: 200 ampere

Tested And Working. No Welding whip. Gas Regulator Included Miller Matic 10E Wire Feeder .035 Drive Rollers Wired for 230V If this item ships as Flat Rate Freight please see details in Shipping tab

Miller Invision 304P Mig Welder 300 amp DC Arc 11kW 460VAC 3PH Power Unit

• Manufacturer: Miller
• Model: Invision

In Good Used Condition. Tested And Working If this item ships as Flat Rate Freight please see details in Shipping tab

Lincoln 8794 Idealarc R3R-500 Stick Welder Welding Power Source 500 Amp 230/460

• Manufacturer: Lincoln
• Model: Idealarc R3R-500

Tested And Working If this item ships as Flat Rate Freight please see details in Shipping tab

Pexto 298B Power Metal Circle Shear 32" Circle Cutter 20GA 1/4Hp 115V 1Ph

• Manufacturer: Pexto

Used, in Good Working Condition, Tested OK. Tested in our shop. Wired for 110V 32" is the max circle. Can easily be adjusted. If this item ships as Flat Rate Freight please see details in Shipping tab

Starrett 128AZ Inside Micrometer Set Combination Head & Inside Micrometer

• Manufacturer: Starrett

In Good Used Condition, Removed from a Working Environment. 81-138-128 Dial Indicator 128 Combination Head Has Some Light Rust If this item ships as Flat Rate Freight please see details in Shipping tab

3/8" Steel Top Turn Table Work Bench 52"x25.25" 230/460V 3Ph

Used. Rotates 17-1/2 per minute. This is at 60hz 3/8" top. This has been painted may not ground the best for welding. 52" top. Height is 25-1/4" 3/4 hp motor 3 phase 230/460V Wired for 230V Local pickup or termin...

Delta Rockwell 28-350 Vertical Bandsaw 20" Wheel 1Hp 230/460V 3Ph Metal Wood

• Manufacturer: Rockwell
• Model: 28-350

Used, in Good Working Condition. Wired for 480V 1Hp 3Ph motor. Older unit. May need a tune-up Top is 20x24" If this item ships as Flat Rate Freight please see details in Shipping tab

Kaydon 816BC Teleflo Flow Switch Dial Indicator 1" Female NPT

• Manufacturer: Kaydon

In Good Used Condition, Removed from a Working Environment. If this item ships as Flat Rate Freight please see details in Shipping tab

Miller XR15A Spoolmatic 15A Air Cooled Gun 15' Push Pull

• Manufacturer: Miller

Used, in Good Working Condition. Tested. Tested in shop 15' of Lead Wire currently feeds through lead not a spool. Gun will accept a spool. New Tip If this item ships as Flat Rate Freight please see details in Sh...

Strippit Fabricator Super 30 Single Punch Press 30 Ton 230/460V Foot Switch

• Manufacturer: LVD - Strippit
• Model: Super 30/30

In Good Used Condition. Tested and working. 72" x 48" Work table size. The stops work good. 30" Throat depth. Comes with lots of punches. Product Videos If this item ships as Flat Rate Freight please see details ...

Steel Work Bench Welding Table 4-1/2" Vise 1/4" Plate 65x36" Top 38.5" High

• Manufacturer: Ridgid

Used, in Good Working Condition. Has a 4-1/2" vise in the one end. Ridgid 45CPM This unit is missing the removable clamping tooth inside the unit. 1/4" steel plate. 65-1/2 x 36-1/2" top. Dual doors. These are all...

Rock of Ages 4x8' Granite Surface Inspection Plate Table 96x48x14" Grade B Type

• Manufacturer: Rock of Ages

Used, in Good Working Condition. Top is 8x4' or 96x48" 14" thick. Looks to be grade B. Has some chips on the side from handling. Top is at 34" tall. No part or inspection tag. Looks like a Rock of Ages tag size. ...