Used Machine Tools in Indiana, USA

Sampson MN150-10 Double 45° Miter Saw 10" Blade 1.5Hp Motor 230/460V 3Ph Notche

• Manufacturer: Sampson

Used, in Good Working Condition. Tested. Pneumatic air foot pedal controls. Motors are both wired for 480V 3 phase. This was setup to cut plastic window frames. If this item ships as Flat Rate Freight please see ...

Yaskawa 350AYWE0 Robot Automatic Motoman Welding Power Supply 350A 480V 60%

• Manufacturer: Yaskawa - Motoman

Used Surplus, Acquired From Spare Parts Storeroom. Rated for 350 amps at 60% and 270 amps at 100% duty. For a welding robot weld cell. 480V 3 ph. iInput If this item ships as Flat Rate Freight please see details ...

Dial-X 24" Index Table Pneumatic Air Motor Rotary Indexer Aro 8230-7A

• Manufacturer: Automated Equipment

In Good Used Condition. 24" table dia. 7" height. 1-1/4" thick. ARO air motor powered. 8230-7A. Non-Reversible 800 RPM. If this item ships as Flat Rate Freight please see details in Shipping tab

5 Hp Double Cylinder Custom Hydraulic Punch Press 2 Hole Punch for 1" Tube 460V

Tested and works as it should. 460V 3 phase. Will pierce 5/16" holes into 1" tubing. 1-3/4" center to center hole spacing If this item ships as Flat Rate Freight please see details in Shipping tab

CTD F426 Straight Cut-Off Saw 16" Blade 3450 RPM 5 Hp 3Ph Air Foot Control 90°

• Manufacturer: CTD

Used, in Good Working Condition, Tested OK. 90° cut only. Working height is 32-1/4" Foot pedal controls. Air powered. Auto oiler. Setup for metal cutting. Probably aluminum. 3450 RPM. 5Hp motor. 3Ph 230/460V. Man...

Federal No 2 Mechanical Punch Press 18 Ton 2 Hp 230/460V 2.5" Stroke 5.5" Throat

• Manufacturer: Federal
• Model: NO 2
• Stroke length: 2.5 millimeter

Throat Opening (Frame to Center of Ram) (Inches): 5.5 Used, in Good Working Condition, Tested. No specs on the tonnage. Just the No 2 on the side. Nice clean older unit. Ready for work. Has foot controls. There a...

Everett 16-MIT Cut Off Abrasive Metal Saw 16" Blade Exhaust Blower 10Hp 3210RPM

• Manufacturer: Everett

Used, in Good Working Condition, Tested. This is a working cut off saw. 16" blade. 230/460V 10 Hp main motor. Has a blower motor. 1 hp motor with a 16" centrifugal fan. Inside of cabinet is rusting through the bo...

Okuma LC40 CNC Lath Z Axis Ball Screw Assembly Remanufactured

• Manufacturer: Okuma
• Model: LC40

Paper work shows it is remanufactured by Barns Industries In crate never installed after repair If this item ships as Flat Rate Freight please see details in Shipping tab

Lincoln R3R-500 9884 DC ARC Stick Welder Multi Process Switch Air Carbon Gouging

• Manufacturer: Lincoln
• Model: R3R-500

Arcair K3000 With 9' Lead and 7' Arc Gouging Torch If this item ships as Flat Rate Freight please see details in Shipping tab

Lincoln 11344 IDEALARC R3R 500 Amp DC Arc Stick Welder 230/460 3 PH Leads Tested

• Manufacturer: Lincoln
• Model: Idealarc R3R-500

Tested And Working If this item ships as Flat Rate Freight please see details in Shipping tab

Di-Acro Turret Punch No. 12, Hand Turret Punch Press 12 Station

• Manufacturer: Di-Acro

In good working condition This unit comes with the following punch sizes, 11/32", 1/4", 1/8", 9/32", 3/8", 13/32", 7/16", 15/32", 1/2", 3/4", 1", 3/16". 12 Station On a nice stand Contact us for a freight quote o...

Miller CP-252TS Mig Welder 100% Duty 22A Wire Feeder 200/230/460v 3PH 250 amp

• Manufacturer: Miller
• Model: CP-252TS

Tested And Working Gas Regulator Included Miller 300615 22a 24v 2 roll Wire Feeder .035 Drive Rollers Nozzle for Gun is Missing If this item ships as Flat Rate Freight please see details in Shipping tab

Lincoln 9939 IDEALARC CV 300 Mig Welder LN 7 Wire Feeder 230/460 Volt Tested

• Manufacturer: Lincoln
• Model: Idealarc CV300

Tested And Working If this item ships as Flat Rate Freight please see details in Shipping tab

L&J No 18 Mechanical OBI Punch Press 18 Ton 2" Stroke 6" Throat 1.5Hp 3Ph

• Manufacturer: L&J
• Stroke length: 2 millimeter

Ram Bolt Distance (Center to Center) (Inches): 3-1/4 Throat Opening (Frame to Center of Ram) (Inches): 6 Used, in Good Working Condition, Tested OK. Tested in our shop. Wired for 208V 3 phase Has aftermarket plat...

L&J No 18 Mechanical OBI Punch Press 18 Ton 2" Stroke 6" Throat 1.5Hp 3Ph

• Manufacturer: L&J
• Stroke length: 2 millimeter

Ram Bolt Distance (Center to Center) (Inches): 3-1/4 Throat Opening (Frame to Center of Ram) (Inches): 6 Used, in Good Working Condition, Tested OK. Tested in our shop. Wired for 208V 3 phase Has aftermarket plat...