Used Extruders in New Jersey, USA

Trusted Seller
2006 Scheer Bay WAA300
- Manufacturer: Scheer
Used 13.5" wide Scheer Bay Model air knife. Model WAA300, Serial #WAA300-0582, new 2006. Driven by a 7.5 HP Baldor Super E motor, 460 volt 3 phase 60 hertz. Includes starter and controls. Caster mounted. Previous...
Hainesport, NJ
Trusted Seller
GALA 403VDW
- Manufacturer: GALA
Used 50,000 Lb. Per Hour Gala Model 403VDW Stainless Steel Spin Dryer 43" diameter circular housing 20 hp Baldor motor Serial No. 911039-2
Hainesport, NJ
Trusted Seller
GALA 16.2ECLN-BF
- Manufacturer: GALA
Used Gala Stainless Steel Spin Dryer Model 16.2ECLN-BF Serial #982157
Hainesport, NJ
Trusted Seller
LUMBER TOOLING 6"
- Manufacturer: LUMBER TOOLING
Used artificial lumber tooling previously used for various shapes. Approximately 6" in width.
Hainesport, NJ
Trusted Seller
THORESON MCCOSH TD2000
- Manufacturer: Thoreson McCosh
Used 6,000 lb. Thoreson McCosh Desiccant Dryer Model TD2000. Serial #201-703-05. 480 volt, AC input, 20 hp. Amps 236.0, kw 182.0. No hopper included.
Hainesport, NJ
Trusted Seller
UNA-DYN GS150
- Manufacturer: Una-Dyn
Used Una Dyn Piovan Desiccant Dryer. Model GS150, serial #237240-01-01-0903. Rated at 150 cfm. Includes approximately 800 LB., 30" diameter x 72" straight side x 19" cone bottom insulated hopper with top mounted ...
Hainesport, NJ
Trusted Seller
CO-EX BLOCK 6-Layer
- Manufacturer: CO-EX BLOCK
Used extrusion co-ex Block last used in a laboratory environment with approximately 1.25" diameter extruders and a 12" sheet die. Includes six (6) inserts of varying percentages. Five (5) are in a box and one (1)...
Hainesport, NJ
Trusted Seller
2000 CLOEREN 2.5", 3.5" and 5.25"
- Manufacturer: CLOEREN
Used Cloeren 3-layer co-ex block designed for asymmetric layer configurations (A/B/C at 12/64/24%). For 2.5", 3.5" and 5.25" extruders. Manufactured 2000 Never used. Feed block is a variable geometry vein type.
Hainesport, NJ
Trusted Seller
LEISTRITZ 30mm
- Manufacturer: Leistritz
Used 30mm Leistritz counter-rotating twin screw extruder, 42/1 L/D vented barrel. New 1987. Has 11kw motor, 2200 rpm, 422 volt input. Gearbox rated at 13.5kw at 60hz. Barrel is electrically heated and air cooled ...
Hainesport, NJ
Trusted Seller
6" DIA.
- Manufacturer: 2-ROLL PULLER
Used 2-roll puller. 6" diameter X 10" long.with motor
Hainesport, NJ
Trusted Seller
6" DIA.
- Manufacturer: 2-ROLL PULLER
Used 2-roll puller. 6" diameter X 10" long. Rubber rolls with motor
Hainesport, NJ
Trusted Seller
GOODMAN 3" Wide x 22" Long
- Manufacturer: GOODMAN
Used Goodman Solid Belt Puller – Approx. 3" (76 mm) Wide x 22" (559 mm) Long Solid belt design with an approximate belt width of 3 inches (76 mm) and length of 22 inches (559 mm). Frame includes a provision for i...
Hainesport, NJ
Trusted Seller
WERNER & PFLEIDERER ZSK20
- Manufacturer: WP
- Model: ZSK20
Used 40mm Werner & Pfleiderer co-rotating Twin Screw Extruder. Model ZSK40, serial #180399, new 1990. Has 46/1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/...
Hainesport, NJ
Trusted Seller
2002 LEISTRITZ ZSE 100
- Manufacturer: Leistritz
Used Leistritz 100mm 44/1 L/D Co-Rotating Twin Screw Extruder. Model ZSE100 GL/44D, serial #3092, new 2002. Driven by 330 kw (442 hp), 1600 rpm DC motor with SCR control. Has 300 rpm screw speed, rated at 5000 Ne...
Hainesport, NJ
Trusted Seller
Cincinnati Argos 112P-65-20-1150-UL
- Manufacturer: Cincinnati
Used 112mm Cincinnati model Argos 112P-65-20-1150-UL parallel counter rotating twin screw plastic extruder. Serial #2804784/010. Screw length approximately 3020mm long x 112mm diameter screw, L/D ration of 27:1. ...
Hainesport, NJ