Used Extruders in New Jersey, USA

2002 LEISTRITZ ZSE 100

• Manufacturer: Leistritz

Used Leistritz 100mm 44/1 L/D Co-Rotating Twin Screw Extruder. Model ZSE100 GL/44D, serial #3092, new 2002. Driven by 330 kw (442 hp), 1600 rpm DC motor with SCR control. Has 300 rpm screw speed, rated at 5000 Ne...

Cincinnati Argos 112P-65-20-1150-UL

• Manufacturer: Cincinnati

Used 112mm Cincinnati model Argos 112P-65-20-1150-UL parallel counter rotating twin screw plastic extruder. Serial #2804784/010. Screw length approximately 3020mm long x 112mm diameter screw, L/D ration of 27:1. ...

ZUMBACH KW20

• Manufacturer: Zumbach
• Model: KW20

Used Zumbach model KW20 surface fault detector.

ZUMBACH KW20

• Manufacturer: Zumbach
• Model: KW20

Used Zumbach model KW20 surface fault detector.

ZUMBACH KW20

• Manufacturer: Zumbach
• Model: KW20

Used Zumbach model KW20 surface fault detector.

ZUMBACH KW20

• Manufacturer: Zumbach
• Model: KW20

Used Zumbach model KW20 surface fault detector.

DAVIS STANDARD 2.5"

• Manufacturer: Davis-Standard
• Model: 25

Used 2.5" Davis Standard extrusion screw.

DUAL HEAD AIR KNIFE 14" Wide

• Manufacturer: DUAL HEAD AIR KNIFE

Used dual head air knife, each approximately 14" wide. Powered by a single 10 HP Spencer Turbine Company 700 CFM blower.

GALA 140GPMTWS

• Manufacturer: GALA

Used Gala round reservoir tank Model 140GPMTWS. Serial #20000200905.

GALA 403VDW

• Manufacturer: GALA

Used 50,000 lb. Gala Model 403VDW Stainless Steel Spin Dryer 43" diameter circular housing Includes 20 hp Baldor motor

GALA 16.2VDW

• Manufacturer: GALA

Used Gala Spin Dryer. Model 16.2VDW, serial #810629-2. Includes blower for additional air flow.

GALA 52BF/S

• Manufacturer: GALA

Used Gala Model 52BF/S, Spin Dryer With Water Tempering System Spin dryer is equipped with auxillary blower for aid in drying, agglomerate catcher, 5 hp motor. Serial #800414

GALA 52BF/S

• Manufacturer: GALA

Used Gala Model 52BF/S, Serial #800708-2, Spin Dryer With Water Tempering System Spin dryer is equipped with 3 hp AC motor, auxillary blower to assist in drying, and agglomerate catcher. Water tempering system in...

24" x 12"

Used 24" Wide 3-Roll Down-Stack Cooling Roll Stack (3) 12" diameter rolls Approximately 5' cooling conveyor Rbber to metal pull roll assembly Chill rolls driven by a 5HP DC motor without drive Pull rolls are driv...

RANDCASTLE Ø51 мм × 203 мм

• Manufacturer: RANDCASTLE

Used 2" O.D. x 8" Wide Randcastle Sheet Extrusion 3-Roll Stack including Pull Roll Station and Single Position Winder.