Used Processing in Île-de-France, France

Filtration

Standard: Duplex or triplex. Water flow from 1 to 93 m3/h Specific: Tailored to site demands Babcock Wanson, specialist in boiler house and water treatment solutions, provides a wide range of water filtration sys...

F-DGSi NDL Compressed Air Generator

• Manufacturer: F-DGSi

Absorption Air Dryer Reference | NDL.[Flow rate] Air dryers Atomic absorption, GC-ATD, GC-FID, NMR, Rheometer Compressed air is an important source of energy that is widely used throughout industry. This safe and...

BURKLE, model CHF, Chain of lamination for plastic cards

• Manufacturer: Bürkle

- 1 lift table    - 1 BTR transfer charging element    - 1 hot press    - 1 cold press    - 1 cassette store    - 1 unloading lift table    - 1 conveying path    - 1 temporary store    - 1 heating unit  ...

2018 Ulma MPT15

• Manufacturer: Ulma
• Model: MPT15

Energy: Manual | Lifting capacity: 1 500 kg | Width: 580 mm | Length: 1500 mm | Height: 1,21 m | Fork length: 1 050 mm | Details: STAINLESS STEEL PALLET TRUCK | Lowered mast height: 1210 mm

2018 Ulma EPT20

• Manufacturer: Ulma
• Model: EPT20

Energy: Electric | Lifting capacity: 2 000 kg | Width: 820 mm | Length: 1690 mm | Hours: 217 h | Height: 1,45 m | Type of tire: Bandage | Fork length: 1 090 mm | Details: Stainless steel | Lowered mast height: 1...

ROBOPAC ROTOPLAT XL #74

• Manufacturer: Robopac
• Model: Rotoplat

Stretch Wrapping Turntable 1650 mm diameter 2000 kg base as standard. 1800 mm

2005 Krifft & Zipsner Pile turner E190 #86

• Manufacturer: Krifft & Zipsner

2004 KALLFASS SUPER WRAP 650 DLIL FILM WRAPPING MACHINE #43

• Manufacturer: Kallfass

SUPER WRAP 650 DLIL FILM WRAPPING MACHINE

Thermal Deaeration

Pressurised Thermal Deaerator A pressurised thermal deaerator, operating at circa 0.3 barg allows the temperature of the water to be raised to around 105°C making it possible to obtain water of excellent quality ...

Modulo+

• Manufacturer: Babcock Wanson

Modulo+ Gas Burners Fuel available: Natural gas, Liquefied gas From 6 to 20 MW Turn down ratio 1 to 12. Very low NOx operation of ≤ 60mg/Nm³ at 3% O2 (referring to EN676). Minimum excess air over the entire opera...

LNTA & TA

• Manufacturer: Babcock Wanson

LNTA & TA Industrial Burners Fuel available: Natural gas, Liquefied gas, Gasoil, Medium and Heavy Fuel Oils and other specific fuels on request. LNTA: From 3.5 to 10.5 MW. TA: from 9 to 22 MW. LNTA: Fully integra...

Air Preheating R-Eco

• Manufacturer: Babcock Wanson

Principle of operation: Exhaust Gas Combustion Air Preheating Economiser The benefits of "R-ECO" installation are most apparent where there is greater than 90% condensate return. As returning condensate is alread...

REC Series

• Manufacturer: Babcock Wanson

Ideal for producing steam or high temperature water, the REC Series uses combustion gas coming from diesel engines, gas turbines (co-generation), industrial furnaces, incinerators or other thermal equipment. Thes...

TPC-LN Series

Simple Reliable Operation TPC-LN combustion chamber is formed using concentric wound helical coils which form the gas passes. This safe and simple arrangement provides a very generous combustion chamber resulting...

EPC-H Series

High Efficiency The combustion chamber is designed for low thermal load and has a large heat exchange surface resulting in a high thermal efficiency of up to 92%. The heat exchange design also results in optimal ...