Used Heaters in Île-de-France, France

HTV-N Indirect Process Air Heater

Typical Process Duties Tobacco Drying Milk Drying Salt Drying Chemical Process Food Process Fertilizer Manufacturing Paper Manufacture Starch Production Gum Arabic Production Key Features HTV-N is the perfect sol...

TPC-B Series

Simple Reliable Operation TPC-B includes an integral, air-cooled outer case that acts as both a combustion air pre-heater/economiser and as a constant barrier between the hot combustion gases and the outer struct...

GASAIRBLOC

GASAIRBLOC Direct Process Air Heater Characteristics Robust construction for demanding environments High air discharge temperature Generous combustion chamber for operation with heavy oils Natural gas or liquid f...

MIXBLOC

MIXBLOC Direct Process Air Heater Characteristics Natural gas or LPG fired Can be installed in small spaces and to suit an existing ductwork configuration Air flow can vary between 50-100% or by up to 90% using a...

TPC-LN Series

Simple Reliable Operation TPC-LN combustion chamber is formed using concentric wound helical coils which form the gas passes. This safe and simple arrangement provides a very generous combustion chamber resulting...

EPC-H Series

High Efficiency The combustion chamber is designed for low thermal load and has a large heat exchange surface resulting in a high thermal efficiency of up to 92%. The heat exchange design also results in optimal ...

EPC-ES Series

High Efficiency Thermal Fluid Heating Integral double pass combustion air/exhaust gas economiser ensures very high operating efficiency without the need for external heat recovery – simple, safe and reliable in o...

ORTHOS

• Manufacturer: Babcock Wanson

ORTHOS Gas Burner Fuel available: Natural Gas, Liquefied Gas From 7 to 22 MW Turn down ratio 1 to 24 Very low NOx operation of ≤ 60mg/Nm³ at 3% O2 (referring to EN676) Minimum excess air over the entire operating...

OPTIMO

• Manufacturer: Babcock Wanson

OPTIMO Forced-Draft Burners Fuel available: Natural gas, Liquefied gas, Gasoil, Medium and Heavy Fuel Oils and other specific fuels on request OPTIMO 1, 2, 3 & 4 cover a large power range: from 700 kW to 12.5 MW ...

Thermoslow

• Manufacturer: Babcock Wanson

Thermoslow is a compact burner which complements a conventional combustion system. The equipment has been designed to maintain pressure within a boiler during long-term standby operation without steam flow and wi...

Modulo+

• Manufacturer: Babcock Wanson

Modulo+ Gas Burners Fuel available: Natural gas, Liquefied gas From 6 to 20 MW Turn down ratio 1 to 12. Very low NOx operation of ≤ 60mg/Nm³ at 3% O2 (referring to EN676). Minimum excess air over the entire opera...

LNTA & TA

• Manufacturer: Babcock Wanson

LNTA & TA Industrial Burners Fuel available: Natural gas, Liquefied gas, Gasoil, Medium and Heavy Fuel Oils and other specific fuels on request. LNTA: From 3.5 to 10.5 MW. TA: from 9 to 22 MW. LNTA: Fully integra...

REC Series

• Manufacturer: Babcock Wanson

Ideal for producing steam or high temperature water, the REC Series uses combustion gas coming from diesel engines, gas turbines (co-generation), industrial furnaces, incinerators or other thermal equipment. Thes...