Used Welding Equipment in Bavaria, Germany

Connecting sleeve
as connecting piece between two clamping tubes as connecting piece between screw clamp and clamping tube burnished
Heimertingen, Germany
Deflection bush 90° with fine scaling in 15° steps
user-friendly 360° fine scaling especially practical in combination with push rod clamps can also be used in combination with short or standard spindles with threaded bushes centre distance 50 mm
Heimertingen, Germany
Angle socket 90
Can be used as corner stop Centre distance 50 mm A in mm: 90° | B in mm: 28 | Weight in kg: 0,28
Heimertingen, Germany
Performance screw clamp with spindle
new design universally applicable for horizontal, vertical and inclined clamping of workpieces by turning the holding tube the clamping spindle can be adjusted over 130 mm without changing the clamp (predecessor ...
Heimertingen, Germany
Prism holder D28 with arbor ø 140 mm
Targeted pick-up of tubular elements up to Ø 400 mm Double prism for more possibilities, also suitable for rectangular tubes With screwed-in support tower Height adjustment via support sleeves for support mandrel...
Heimertingen, Germany
Prism holder D28 with arbor ø 110 mm
Targeted pick-up of tubular elements up to Ø 180 mm Double prism for more possibilities, also suitable for rectangular tubes With screwed-in support tower Height adjustment via support sleeves for support mandrel...
Heimertingen, Germany
Prism holder D16 ø 50 mm
Targeted mounting of tubular elements up to Ø 70 mm Screwed in by means of PS bolts Double prism for more possibilities Also suitable for rectangular tubes
Heimertingen, Germany
Taper name D28 ø 110 mm
Pressure and support cone for holding tubes on the inner or outer blade Screwed in by means of countersunk screw Diameter range inside: Ø50 - Ø105 mm Diameter range outside: Ø10 - Ø30 mm
Heimertingen, Germany
Support set screwable D28
Infinitely variable height compensation As support surface on system parts or directly on the table Adjustment range from 22-105 mm infinitely variable With 0.1 mm fine scaling Max. load Max. load 500 kg Burnishe...
Heimertingen, Germany
Support set D28 11 pieces
For compensation of 5-100 mm height difference to the respective support surface Smallest step 1 mm Including 1/10 inch shim (2.54 mm) With dimension indication of the shims Support mandrel suitable for system bo...
Heimertingen, Germany
Angle setting template
The angle setting template can be used flexibly due to the 1° fine scaling on both sides. stepless 0°-90° fixed adjustable 0-60°(15° steps) r = radius 125 mm steel, hardened
Heimertingen, Germany
Contour stop
serves as support and stop element for light workpieces clamping via PS bolt and spacer of the support set cost-effective with 1mm fine scaling
Heimertingen, Germany
Universal stop large with pressure pin
like universal stop large additionally with spring pressure bolt especially for clamping sheet metal and shaped parts, thus no additional fixing of the workpieces necessary clamping stroke 3,5 mm with fine scaling
Heimertingen, Germany
Universal stop large with fine scaling
Combination system bore / slotted hole thus many clamping possibilities incl. 1 mm fine scaling fine scaling allows fine adjustment via crack lines 360° adjustable in position additional recesses for stop, ideal ...
Heimertingen, Germany
Universal stop large
Combination system bore / slotted hole thus many clamping possibilities can be locked and fixed on 5 sides in 25 mm increments by means of PS bolts in the table drilling pattern in position 360° adjustable in 45°...
Heimertingen, Germany