Heimertingen, Germany
Heimertingen, Germany
Heimertingen, Germany
Screw clamp 180° with spindle
each tube can be used individually Adjustable projection can be inserted into the system bore, thus no unnecessary interfering edges highest power transmission due to stable round tubes complete clamping mechanis...
Heimertingen, Germany
Clamping plate for flange 350 x 250 x 25 mm
Pipe flanges can be quickly and precisely pinned to the bolt circle by means of fixing bolts DIN 2633 Nominal widths DN 15 - DN 200 DIN 2632 Nominal widths DN 200 Incl. fixing bolts: 2 x Ø 13.8 mm 2 x Ø 17.8 mm 2...
Heimertingen, Germany
Connecting sleeve
as connecting piece between two clamping tubes as connecting piece between screw clamp and clamping tube burnished
Heimertingen, Germany
Deflection bush 90° with fine scaling in 15° steps
user-friendly 360° fine scaling especially practical in combination with push rod clamps can also be used in combination with short or standard spindles with threaded bushes centre distance 50 mm
Heimertingen, Germany
Angle socket 90
Can be used as corner stop Centre distance 50 mm A in mm: 90° | B in mm: 28 | Weight in kg: 0,28
Heimertingen, Germany
Performance screw clamp with spindle
new design universally applicable for horizontal, vertical and inclined clamping of workpieces by turning the holding tube the clamping spindle can be adjusted over 130 mm without changing the clamp (predecessor ...
Heimertingen, Germany
Prism holder D28 with arbor ø 140 mm
Targeted pick-up of tubular elements up to Ø 400 mm Double prism for more possibilities, also suitable for rectangular tubes With screwed-in support tower Height adjustment via support sleeves for support mandrel...
Heimertingen, Germany
Prism holder D28 with arbor ø 110 mm
Targeted pick-up of tubular elements up to Ø 180 mm Double prism for more possibilities, also suitable for rectangular tubes With screwed-in support tower Height adjustment via support sleeves for support mandrel...
Heimertingen, Germany
Prism holder D16 ø 50 mm
Targeted mounting of tubular elements up to Ø 70 mm Screwed in by means of PS bolts Double prism for more possibilities Also suitable for rectangular tubes
Heimertingen, Germany
Taper name D28 ø 110 mm
Pressure and support cone for holding tubes on the inner or outer blade Screwed in by means of countersunk screw Diameter range inside: Ø50 - Ø105 mm Diameter range outside: Ø10 - Ø30 mm
Heimertingen, Germany
Support set screwable D28
Infinitely variable height compensation As support surface on system parts or directly on the table Adjustment range from 22-105 mm infinitely variable With 0.1 mm fine scaling Max. load Max. load 500 kg Burnishe...
Heimertingen, Germany
Support set D28 11 pieces
For compensation of 5-100 mm height difference to the respective support surface Smallest step 1 mm Including 1/10 inch shim (2.54 mm) With dimension indication of the shims Support mandrel suitable for system bo...
Heimertingen, Germany
Tip: Enter manufacturer, model or keyword