Used Processing in Illinois, USA

Papenmeier GmbH High Intensity Mixer, Model KUM 2000

• Manufacturer: Papenmeier

10131016 Used Papenmeier GmbH High Intensity Mixer, Model KUM 2000. Stainless steel Interior. Approximate working capacity 47.07 ft (1333 Liter). Total Capacity 70.6 cu. ft (2000 Liter). Hydraulic operated 8" (20...

MTI-Mischtechnik Uni Tec UT 750 High Intensity Mixer – 755L Total Capacity, Stainless Steel, 30 HP, Built 2014

• Manufacturer: MTI-MischtechnikMTI-Mischtechnik

10131015 Used MTI-Mischtechnik High Intensity Mixer, Model Uni Tec UT 750. Stainless steel Interior. Approximate working capacity 7.9-22.6 ft (225-640 Liter). Total Capacity 26.66 cu. ft (755 Liter), Side chopper...

Shortening Extrusion System – Block Feed, Waukesha 064 PD Pump – Twin Feed

• Manufacturer: Waukesha

53777001 Used Block Shortening Extrusion & Pumping System, Stainless Steel. Block ram feed hopper, approximate 17" x 13". Approximate 4" diameter x 36" long horizontal twin feed screws. Driven by 1hp, 3/60/230/46...

MTI M600 High Intensive Mixer System for Sale – 570L Capacity

• Manufacturer: MTI-MischtechnikMTI-Mischtechnik

53141001 Used MTI Mixing system consisting of: (1) MTI - MISCHTECHNIK INDUSTRIEANLAGEN GMBH High Intensive Mixer, type M600. 1.4541/AISI 321; ground in grain size 180 Stainless steel on product contact parts. Tot...

Mixaco High-Intensity Model CM 600D Container Mixer – Industrial Equipment – Chemical Grade, 40 HP

• Manufacturer: Mixaco
• Model: CM

52095003 Used Mixaco Model CM 600D High Intensity Container Mixer. Stainless steel on product contact parts. Working Capacity 12.71 Cu FT (360 Liter), Total Capacity 21.18 (600 Liter). Rotating mixing chamber wit...

Pre-Owned Thyssen Henschel Industrial Mixer MB 1000 – Masterbatch Manufacturing

• Manufacturer: Henschel

52184001 Used Thyssen Henschel Industrietechnik High Intensive Mixing System/Mixer, type MB 1000. Material of construction is stainless steel on product contact parts, Total capacity 35.3 Cu Ft. (1000 liter). 46....

Mixaco High-Intensity Mixer – Model M 400-CD, Stainless Steel

• Manufacturer: Mixaco

53865001 Used Mixaco High Intensity Mixer, Model M 400-CD, Stainless Steel. Max working capacity 165-240 liters (5.83-8.48 cubic feet), total capacity 400 liters (14.13 cubic feet). Max mixing speed 15 RPM by a 6...

CDS Air Traveling Up-Cut Profile Saw – Model CTS 4.5-8, 14” Blade

• Manufacturer: CDSCDS

10755181 Used CDS Air Traveling Up-Cut Profile Saw, Model CTS 4.5-8. Unit rated for 8" wide 3.5" high profiles, 4.5" high x 4" wide profiles, and 4.5" OD pipe. 14" diameter saw blade. Tag on unit reads Saw motor ...

Greiner Extrusionstechnik CAT-PUL 30/9-235-S Puller / Saw Combination for S

• Manufacturer: Caterpillar

53881001 Used Greiner Extrusionstechnik Puller / Saw Combination, Model CAT-PUL 30/9-235-S. Approximate 9-3/4" wide belt. (1) Upacting saw with pneumatic hold down. Control panel, Control technologies unidrive V3...

Mitsui Mike 700L High-Intensity Mixer – 75 HP, 304 Stainless Steel

• Manufacturer: Mitsui Seiki

51226009 Used Mitsui Mike 700 Liter Capacity High Intensity Mixer, 304 Stainless Steel. Approximate 36" diameter x 42" deep jacketed bowl. Jacket rated 5 kg/cm2 (71 psi). Two tier bottom blade, driven by a 75hp, ...

MGB 12" Slide Plate Screen Changer – High-Performance Polymer Filtration

• Manufacturer: MGBMGB

51865005 Used MGB Model SC12 Slide Plate Screen Changer. (2) Nominal 12" diameter breaker plates. Unit is mounted on a stand with casters supplying approximately 42" discharge height. Package includes a 10 HP Pow...

15 HP Gear Pump – Model LS56/56 | High-Performance Pump for Extrusion Applications

44882019 Used 15 HP gear pump, model LS56/56. Previously used on 4.5" Davis Standard extruder.

Maag CSC-149 Continuous Double-Piston Screen Changer | 3,000 lb/hr | 100 Mesh | 350°F | Built 2018

• Manufacturer: Maag

54129006 Used Maag CSC-149 Continuous Double-Piston Screen Changer | 3,000 lb/hr | 100 Mesh | 350F | Built 2018, double-piston continuous screen changer). Rated up to 3,000 lb/hr (1,360 kg/hr). 100 mesh screen. U...

Davis Standard / Xaloy 6" Diameter Extruder / Pelletizing line

• Manufacturer: Davis-Standard

10755157 Used Davis Standard / Xaloy 6" pelletizing line consisting of: One (1) Davis Standard 6" model 60IN60TPTH extruder having a 34:1 L/D ratio barrel with a seven (7) zone electrically, heated, water cooled ...

Shanklin T-9 Shrink Wrapping Machine

• Manufacturer: Shanklin
• Model: T-9

Good condition Shanklin T-9 Shrink Wrapping Machines. Located in USA and other countries. Click request price for more information.