Used welding

WELD NECK FLANGE, 24" PIPE, CLASS 300, OUTSIDE DIAMETER 36"

WELD NECK FLANGE, 24" PIPE, CLASS 300, OUTSIDE DIAMETER 36" UNKNOWN BRAND WELDING NECK FLANGE 24" PIPECLASS 300OUTSIDE DIAMETER 36"THICKNESS 2.75"RAISED FACE DIAMETER 27.25"LENGTH THROUGH HUB 6.63"POINT OF WELD 2...

800 GALLON STORAGE TANK. D+W WELDING AND FAB SERIAL 4947-1

• Manufacturer: D+W WELDING AND FAB

800 GALLON STORAGE TANK. D+W WELDING AND FAB SERIAL 4947-1

Welded Steel 12,000 Gallon Diesel Tank

• Manufacturer: WELDED STEEL

12,000 Gallon Diesel Fuel Tank, Skidded

Weld Wire 30-Ton Tank Turning Rolls - Used

• Manufacturer: Weldwire Company of Texas

Weld Wire 30-Ton Tank Turning Rolls 1- Driver 2- Idlers Driver Model- WWRD30ST Idler Model- WWRI30ST Capacity With 1 Drive 2 Idler- 90,000lbs Diameter Range- 6'' - 16' Input 460 Volt

5,000 GALLON WEST WARWICK WELDING CARBON FILTRATION TANK - 304 S/S

• Manufacturer: West Warwick Welding

1 - Used West Warwick Welding Inc. approximately 5000 gallon/ 675 cu. Ft. 304 stainless steel carbon filtration tank. 8'-6" diameter X 12' high straight side. Internal rated 100 PSI @ -20 to 500 F. National Board...

5,000 GALLON WEST WARWICK WELDING CARBON FILTRATION TANK - 304 S/S

• Manufacturer: West Warwick Welding

1 - Used West Warwick Welding Inc. approximately 5000 gallon/ 675 cu. Ft. 304 stainless steel carbon filtration tank. 8'-6" diameter X 12' high straight side. Internal rated 100 PSI @ -20 to 500 F. National Board...

0.8 in. WELDING ENGINEERS TWIN SCREW EXTRUDER – 34:1 L/D

• Manufacturer: Welding Engineers

1 – used .8 in. Welding Engineers Twin Screw Extruder. Model HT0.8. With counter rotating tangential screws. Barrel with (7) sections including (2) vented and plugged sections and (1) vented section. Electrically...

SAMUEL SCD-14 #1009824

• Manufacturer: SAMUEL

STRAPPING HEAD: ROUND - 28" STRAPPING MACHINE: STRAP DISPENSER: COIL DETAILS:

NEW 200 GALLON SINGLE MOTION KETTLE WITH WELDED FLIGHT BARS ON AGITATOR

1 - NEW 200 gallon Single Motion Jacketed Mixing Kettle. - T-316 stainless steel contact surfaces - Sanitary configuration - Hemispherical Style Kettle - ASME-U Stamped & NB Registered Steam Jacket rated 90 psi ...

DELSTRON 500 Litre

• Manufacturer: DELSTRON

Unused Delstron approximately 500 Litre capacity stainless steel vertical vessel. Unit has a welded dished top and welded flat sloped bottom. Unit measures approximately 1250mm diameter x 1700mm straight side. In...

Key Technology Model: 430870-1 S.S. Vibratory Shaker Feed ISO-FLO Conveyor

• Manufacturer: Key Technology Inc.

Unit is USED - GOOD CONDITION. There are some visible minor surface scratches, some minor wear, dents and dings but none affecting the functionality or the intended use of the unit. What you see in the pictures i...

STAINLESS SERVICES LTD. 1,370 Litre

• Manufacturer: STAINLESS SERVICES LTD.

Used Stainless Services Ltd approximately 1,370 litre 316L stainless steel vertical storage tank. Unit measures approximately 1200mm diameter x 770mm straight side. Unit has welded dished top and welded cone bott...

SINCLAIR STAINLESS 9.300 Litre

• Manufacturer: Sinclair

Used Sinclair Stainless Ltd approximately 9,300 litre working capacity stainless steel vertical mixing vessel. Unit measures approximately 2,200mm diameter x 2,450mm tan to tan straight side. Unit has welded dish...

WINKWORTH PV3000

• Manufacturer: WINKWORTH

Used Winkworth model PV3000 approximately 3,000 litre stainless steel vertical mixing vessel. Unit has a welded flat top and welded conical bottom. Unit measures approximately 1650mm diameter x 1800mm straight si...

11,000 LITRE

• Manufacturer: STAINLESS STEEL JACKETED TANK

Used approximately 11,000 litre stainless steel vertical jacketed storage vessel. Unit measures approximately 2200mm diameter X 3300mm straight side. Has welded dished top and welded flat bottom heads.