Processing » Japan

Building Filters

15

Used welding in Japan

Trusted Seller
2023 AIRMAN SMS8ESD-5C
- Manufacturer: Airman
Machine Specifications Motor: 7.5 kW Discharge Pressure: 0.83 MPa Air Discharge Volume: 1.0 m3/min Power Supply: 200 V 50 Hz Machine Size: Dimensions: 1070 mm W x 670 mm D x 1130 mm H Weight: 325 kg Sales Comments
Tokyo, Japan
Trusted Seller
2007 ANEST IWATA TLP-22B-10
- Manufacturer: ANEST IWATA
Mechanical Specifications ○Motor Frequency: 50Hz Output: 2.2kW [3 HP] Power Supply: 200V, 3-Phase ○Compressor Air-Cooled/Indoor, Oil-Filled, Reciprocating Lower Limit: 0.8MPa, Upper Limit: 1.0MPa Tank: 80L ○Devic...
Tokyo, Japan
Trusted Seller
2003 Hitachi Industrial Equipment Systems SRL-3.7DA5
- Manufacturer: Hitachi Industrial Equipment Systems
- Model: SRL-3.7DA5
Machine Specifications ○ Power source Three-phase 200V [for 50Hz] Oil-free/low noise/scroll type ○ Capacity Output 3.7kw, Max. pressure 0.83MPa Discharge air volume 400L/min Ambient temperature 5～40°C Noise level...
Tokyo, Japan
Trusted Seller
2021 Hitachi Industrial Equipment Systems SRL-11DMNA5
- Manufacturer: Hitachi Industrial Equipment Systems
- Model: SRL-11
Machine Specifications Low noise scroll type oil-free dryer built-in package type ○ Configuration Main unit SRL-5.5CB Dryer HDP-110A ○ Capacity Output 5.5x2 kW 3-phase 50Hz Maximum pressure 0.8MPa Blowing volume ...
Tokyo, Japan
Trusted Seller
2010 Nagano Science LH 21 - 12 M
- Manufacturer: Nagano Science
Machine Specifications Power supply AC200V (within 190 to 220V) 3φ 50/60Hz Maximum load current (main breaker) 18.5A (30A) Operating ambient temperature range +5°C to +35°C Temperature/Humidity Range Temperature/...
Tokyo, Japan
2008 Izumi Food Machinery NPW30F06-042-6-H type
- Manufacturer: イズミフードマシナリー
Tubes in shell-and-tube heat exchanger replaced by All welded plate & tube heat exchangers Shell and tube heat exchanger Material is under investigation
Kure, Japan
2010 NIPPON SOSEY KOGYO CO.,LTD. EX-101
- Manufacturer: 日本ソセー工業
Product name: Super Shot (Liquid Dispensing Machine) | Power: 200V eG3 | Material: Liquid Weld SUS/Teflon | Supplier area: 50Hz
Tamba-Sasayama, Japan
1999 TANABE WILLTEC INC. DAC-36-36J
- Manufacturer: タナベウィルテック
Product name: centrifuge | Power: 18.5kW/1.5kW 4P 200V | Material: Liquid weld part SUS304 (top and bottom of basket are Teflon coated) | Supplier area: 60Hz
Tamba-Sasayama, Japan
1985 Fuji Sangyo Corporation (now：Powrex Corporation) FM-VG-600
- Manufacturer: Fuji Sangyo Corporation
Product name: vertical granulator | Power: 22kw + 11kw | Material: Welded part: SUS304 / Others: SUS304 & SS | Supplier area: 50Hz | Control panel: Stand-alone control panel | Accessory: liquid tank | Document: ...
Tamba-Sasayama, Japan
1995 Powrex Corporation FM-VG-600
- Manufacturer: Powrex Corporation
Product name: vertical granulator | Power: 45kw+15kw | Material: Welded part: SUS304 / Others: SUS304 & SS | Supplier area: 50Hz | Control panel: Stand-alone control panel | Accessory: liquid tank | Document: Dr...
Tamba-Sasayama, Japan
2019 FUJI KOKI. CO.,LTD VSD3-3/15（special type）
- Manufacturer: 富士工機
Product name: Vacuum Shelf Dryer | Material: Powder welding part, heating plate, door exterior surface: SUS304 Buff #400 equivalent finish | Supplier area: 50Hz | Document: completed books | Develop note: incomp...
Tamba-Sasayama, Japan
1970 Nippon Coke & Engineering Co., Ltd.（Mitsui Miike） FM-300A
- Manufacturer: 日本コークス（三井三池）
Product name: Henschel Mixer | Power: 55KW/27KW 4P/8P 440V | Material: Powder-welded SUS+aluminum | Supplier area: 50Hz | Control panel: There | Weight: 1900kg
Tamba-Sasayama, Japan
1987 Nippon Coke & Engineering Co., Ltd.（Mitsui Miike） FM-300J
- Manufacturer: 日本コークス（三井三池）
Product name: FM MIXER | Power: 55KW/27KW 4P/8P 440V | Material: Powder-welded SUS+aluminum | Supplier area: 50Hz | Control panel: Control panel | Develop note: Reconditioned | Weight: 1900Kg | Size: 2700L×1000W...
Tamba-Sasayama, Japan
1987 TOSHIN Co.,Ltd. TD10-15M
- Manufacturer: 株式会社トーシン
Product name: Pressure kneader | Power: 11KW 4P 220V 0.75KW 4P 220V | Material: Powder-welded SUS304 + hard chrome plated | Supplier area: 60Hz | Control panel: Controle Panel | Develop note: Reconditioned | Wei...
Tamba-Sasayama, Japan
STRAPACK D55
- Manufacturer: StraPack
Power supply: Single phase 100V 50 / 60Hz | Rated power consumption: 0.4kW | Outside size: Width 785 x Depth 545 x Height 750 (mm) (manufacturer catalog specifications) | Machine weight: About 50kg | Packable di...
Toda, Japan

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.