Building Filters
- Trusted Seller
2023 AIRMAN SMS8ESD-5C
- Manufacturer: Airman
Machine Specifications Motor: 7.5 kW Discharge Pressure: 0.83 MPa Air Discharge Volume: 1.0 m3/min Power Supply: 200 V 50 Hz Machine Size: Dimensions: 1070 mm W x 670 mm D x 1130 mm H Weight: 325 kg Sales Comments
Tokyo, Japan - Trusted Seller
2007 ANEST IWATA TLP-22B-10
- Manufacturer: ANEST IWATA
Mechanical Specifications ○Motor Frequency: 50Hz Output: 2.2kW [3 HP] Power Supply: 200V, 3-Phase ○Compressor Air-Cooled/Indoor, Oil-Filled, Reciprocating Lower Limit: 0.8MPa, Upper Limit: 1.0MPa Tank: 80L ○Devic...
Tokyo, Japan - Trusted Seller
2021 ORION QSQ180D-E
- Manufacturer: Orion
Machine Specifications Non-CFC, heatless adsorption type air dryer ○Processing volume Dew point -20 to -40 degrees Celsius Inlet air volume 1.80 - 1.53m3/min Outlet air volume 1.54 - 1.27m3/min Dimensions Dimensi...
Tokyo, Japan - Trusted Seller
2010 Nagano Science LH 21 - 12 M
- Manufacturer: Nagano Science
Machine Specifications Power supply AC200V (within 190 to 220V) 3φ 50/60Hz Maximum load current (main breaker) 18.5A (30A) Operating ambient temperature range +5°C to +35°C Temperature/Humidity Range Temperature/...
Tokyo, Japan - Trusted Seller
2021 Hitachi Industrial Equipment Systems ST-230C
- Manufacturer: Hitachi Industrial Equipment Systems
Machine specification ○ Capacity Capacity 230L Pressure 1.02MPa Receiver tank of standing type. Comment from sales representative The tank was used in an indoor research facility. Manufactured in 2021.
Tokyo, Japan - Trusted Seller
2021 Hitachi Industrial Equipment Systems SRL-11DMNA5
- Manufacturer: Hitachi Industrial Equipment Systems
- Model: SRL-11
Machine Specifications Low noise scroll type oil-free dryer built-in package type ○ Configuration Main unit SRL-5.5CB Dryer HDP-110A ○ Capacity Output 5.5x2 kW 3-phase 50Hz Maximum pressure 0.8MPa Blowing volume ...
Tokyo, Japan - Trusted Seller
AMANO VF-5NA
- Manufacturer: Amano
- Model: VF-5NA
Machine Specifications ○Power/Output 100V Single-Phase 0.4kW 50Hz Only ○Capacity Suction Diameter φ63.5mm Filter 1.6㎡ Automatic Vibrating Dust Removal Bucket 6.5L ○Machine Size Sales Comments Make dust-producing ...
Tokyo, Japan - Trusted Seller
AMANO VF-5N
- Manufacturer: Amano
- Model: VF-5N
Machine Specifications ○Power/Output 100V Single-Phase 0.4kW 50Hz Only ○Capacity Suction Diameter φ63.5mm Filter 1.6㎡ Manual Vibration Duster Bucket 6.5L ○Machine Size Sales Comments Make dusty workplaces safe an...
Tokyo, Japan - Trusted Seller
2003 Hitachi Industrial Equipment Systems SRL-3.7DA5
- Manufacturer: Hitachi Industrial Equipment Systems
- Model: SRL-3.7DA5
Machine Specifications ○ Power source Three-phase 200V [for 50Hz] Oil-free/low noise/scroll type ○ Capacity Output 3.7kw, Max. pressure 0.83MPa Discharge air volume 400L/min Ambient temperature 5～40°C Noise level...
Tokyo, Japan 1990 Plate heat exchanger
- Manufacturer: 日阪製作所
Where to use: Chemical factory Food factory Environmental recycling factory Water treatment plant | Heat transfer area: 75m2 SUS pressure leak tested, as-is
Kure, Japan- Kure, Japan
2003 LX-025A-TNHJR-6, Hisaka Mfg.
- Manufacturer: Hisaka
Heat transfer area: 0.5 m2. Maximum operating temperature: 144°C on A side and B side. Confidential test has been conducted. Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan
2000 Kohken Powtech FS-J01-S
- Manufacturer: Kohken Powtech Co.
Capacity: 20Kg/h max. ⇓Test run video⇓. Power: 0.4Kw200V | Quantity saved: 1
Hiroshima, Japan
Mitsubishi Kakoki KVZ25ML
- Manufacturer: Mitsubishi
7.5kw 440V Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan
Hitachi 38L
- Manufacturer: Hitachi
- Model: 38L
Maximum working pressure 10.7Kg Water pressure test pressure 16.9Kg
Hiroshima, Japan
