Processing » Saitama

Building Filters

17

Used test in Saitama, Japan

  • Trusted Seller
    YAC DAStech LN2 DISPENSER

    YAC DAStech LN2 DISPENSER

    • Manufacturer: YAC DAStech

    Cutting Machine Lineup Liquid Nitrogen Dispenser LN2 DISPENSER Liquid nitrogen dispensing equipment with 500 ml inner capacity! Small, lightweight and drip amount is adjustable to small amounts. Features 1. Preve...

    Saitama, Japan
  • Anest Iwata Corporation TFP37CF-10

    Anest Iwata Corporation TFP37CF-10

    • Manufacturer: Anest Iwata Corporation

    Power supply: Three-phase 200V 60Hz | Motor: 3.7kW 4POLE | Tank capacity: 100L | Discharge air volume: 370L/min | Maximum pressure: 1.08MPa | Water pressure test pressure: 1.62MPa | Noise value: 75dB (from speci...

    Toda, Japan
  • Sanyo Electric Co., Ltd. (now

    Sanyo Electric Co., Ltd. (now Panasonic Corporation) BF-E120H

    • Manufacturer: Panasonic

    Effective internal volume: 403 liters | Power supply: Three phase 200V 50 / 60Hz | Power consumption: During operation: 673W / 714W During defrosting: 1.11kW | Current: During operation: 3.6A / 3.3A During defro...

    Toda, Japan
  • Mitsubishi Electric Corporation MCAV-P900F

    Mitsubishi Electric Corporation MCAV-P900F

    • Manufacturer: Mitsubishi

    Outside size: Width 2591 x Depth 760 x Height 1650 (mm) (from specifications) | Machine weight (product mass): 562kg (from the nameplate) | Power supply: Three-phase 200 V 50/60 Hz | Cooling capacity: 75.0kW | P...

    Toda, Japan
  • Iwai Machine Industry Co., Ltd.MFH-25

    Iwai Machine Industry Co., Ltd.MFH-25

    • Manufacturer: Iwai Machine Industry Co., Ltd.

    Operating pressure: 0.3MPa | Test pressure: Water pressure 0.6MPa

    Toda, Japan
  • Iwai Machine Industry Co., Ltd.MFH-25

    Iwai Machine Industry Co., Ltd.MFH-25

    • Manufacturer: Iwai Machine Industry Co., Ltd.

    Operating pressure: 0.3MPa | Test pressure: Water pressure 0.6MPa

    Toda, Japan
  • Yaesu SK-8

    Yaesu SK-8

    • Manufacturer: Yaesu Inc.

    Power supply: Three-phase 200V | Outside size: Width 1450x depth 1200x height 1600 (mm) | Hook size: 640mm diameter 330mm depth | Full water: 80 liters | Maximum steam operating pressure: 1.9kg / cm2 | Can body ...

    Toda, Japan
  • Omori Machinery Corporation S-5000A-BX

    Omori Machinery Corporation S-5000A-BX

    • Manufacturer: Omori

    Power supply: Three-phase 200V | Packaging ability: MAX120 packs/min (manufacturer's catalog spec) | Film width: MAX450㎜(manufacturer's catalog specs) | Cut dimensions: 110 mm to 9999 mm (manufacturer's catalog ...

    Toda, Japan
  • Arikko Industry Co., Ltd.CS-5T

    Arikko Industry Co., Ltd.CS-5T

    • Manufacturer: Arikko Industry Co., Ltd.

    Remarks: With wheels With manufacturer instruction manual

    Toda, Japan
  • Hitachi Appliances, Ltd.RCR-AP224HV1

    Hitachi Appliances, Ltd.RCR-AP224HV1

    • Manufacturer: Hitachi

    Standard cooling capacity: 20.0kW Power consumption 5.61kW Energy consumption efficiency COP3.57 Standard heating capacity: 21.2kW Power consumption 5.06kW Energy consumption efficiency COP4.19

    Toda, Japan
  • ZUV22AS-R Mitsui Seiki Kogyo Co.

    ZUV22AS-R Mitsui Seiki Kogyo Co.

    • Manufacturer: Mitsui Seiki
    • Noise level: 61 dB

    Power supply: Three-phase 200V (50Hz)Three-phase 200V (60Hz)Three-phase 220V (60Hz) | Main electric motor output: 22KW | Discharge pressure (press): 0.69MPa | Discharge air volume: 3500L/min | Suction conditions...

    Toda, Japan
  • SPEEMER CORPORATION SPEEMER Model 2800

    SPEEMER CORPORATION SPEEMER Model 2800

    • Manufacturer: Spiemer Co., Ltd.

    Required power heater: Three-phase 200V 3.6kW Drive motor three-phase 200V 0.2kW Vacuum motor single phase 100V 1.2kW Cutting heater single phase 100V 0.2kW Operation power supply single phase 100V 0.5kW

    Toda, Japan
  • Shinko Seiki SW-150S

    Shinko Seiki SW-150S

    • Manufacturer: Shinko

    Power supply: Three phase 200V 50 / 60Hz | Capacity: 800 liters | Processing power: Approx. 440 liters | Operating pressure: 0.3MPa | Test pressure: 0.732MPa | Use: Various pastes, yokan, jams, curries, stews, s...

    Toda, Japan
  • Takagi Reiki Co., Ltd ODC-370U

    Takagi Reiki Co., Ltd ODC-370U

    • Manufacturer: Takagi

    Power supply: Three phase 200V 50 / 60Hz | Heater for raising temperature: 2kW | Defrost: off-cycle | Temperature range: Alpha Freeze: +30℃≦Set Value≦-40℃ Quick Freeze：0℃≦Set Value≦-40℃ Temperature rise:15℃≦Set ...

    Toda, Japan
  • KX-R3A2, Hitachi Appliances, Inc.

    KX-R3A2, Hitachi Appliances, Inc.

    • Manufacturer: Hitachi

    Remarks : Air-cooled separate type (special specification with outdoor unit type refrigerator) With main body manufacturer's instruction manual

    Toda, Japan
12

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.