Building Filters
- Trusted Seller

2005 Alfa Laval LATEX 2000
- Manufacturer: Alfa-Laval
- Model: LATEX 2000
Machine type: Process Equipment | Machine location: Arizona | Stock #: 442249 | -capacity: Up to 650 Liters per Hour | -bowl speed: 7269 RPM | -motor shaft: 1500 RPM | -max field density: 1100 kg/m3 | -max sedim...
- Trusted Seller
2021 SnowBall Machinery SNCF-600
- Manufacturer: SnowBall Machinery
Machine type: Process Equipment | Machine location: Upon Request | Stock #: 639717 | -capacity: 600L | -pneumatic requirements: 6 bar, 6L/min | -electrical requirements: 220V, 3P, 60Hz | -dimensions: 55.12″ x 35...
- Trusted Seller
2020 Convectium 710 Shark 010-0707100-0007-0A
- Manufacturer: Convectium
Fill up to 100 devices at a time in less than 60 seconds Dual heat injection system (Max temp of 125C) 120 PSI Maximum Pressure / Ultra-Quiet – Only 60 decibels
- Trusted Seller
2013 Frick XLP2-1012-503
- Manufacturer: Frick
335 Evaporative Tons Rated for R-717 and R-134a Refrigerants Base Heat Rejection = 6953 MBTUH 30 HP Fan Motor (2) 5HP Pump Motor Also Included: Mycom 200VLG Rotary Screw R-717 Refrigerant Compressor 400HP 480V 3P...
- Trusted Seller
2009 Carruthers AdvantEdge 50002 Dicer/Slicer
- Manufacturer: Carruthers
480V The Carruthers Dicer comes with a box of new circular blades, a box of spacers, and the cleaning cart
- Trusted Seller

2000 Cool Clean Mega CYL-1000-HP
- Manufacturer: Cool Clean
-MAWP @ Full Vacuum 350 PSI @ 100° F -Min Design Metal Temp. -320° F @350 PSI Manufactures unit performance specs and requirements: -CO2 Machine currently can do about 60# bio mass at one time with a 6 hour run. ...
- Trusted Seller

West Salem Machinery 4260S
- Manufacturer: West Salem Machinery
-300 HP -Direct Drive Motor with 60″ Wide VFD Panel -3HP HYD Power Pack -Top Loading Infeed Chute -42″ Rotor Diameter Drawing Available
- Trusted Seller
2021 Cryogenic Equipment & Service (CES) CES-LT-LIN-10ftx36in-HOTL
- Manufacturer: Cryogenic Equipment & Service (CES)
Equipment Overview This CES 10ft x 36in Cryogenic Tunnel Freezer, manufactured in 2021, is designed for high-volume, continuous cryogenic freezing using liquid nitrogen. It features all-stainless construction, to...
- Trusted Seller

Amtech ATC-4400
- Manufacturer: Amtech
Machine type: Process Equipment | Machine location: Pennsylvania | Stock #: 487859 | -motor: 50 HP | -cfm: 8000-12500 | -dust drum: 55 Gal | -electrical requirements: 280/460V, 3P, 60Hz | -dimensions: 82.5″ x 53...
- Trusted Seller
2021 RollsRoller 540/170 Premium
- Manufacturer: RollsRoller
Height Adjustable Table Machine type: Process Equipment | Machine location: Oregon | Stock #: 200769 | Table size: 17 ft 9 in x 5 ft 7 in | Output: 1290 SQ FT/HR | Width of working area: 64″ | Work height flat be...
- Trusted Seller
Zenith Ultrasonics ACS-70S
- Manufacturer: Zenith
Equipment Overview The ZENITH ACS-70S is a fully enclosed ultrasonic cleaning system designed for mid-size industrial applications including aerospace, manufacturing, and precision component washing. With a 70-ga...
- Trusted Seller
2021 Jornen BG-80
- Manufacturer: Jornen
Equipment Overview Pharmaceutical-grade coating machine designed for tablets and pills. This Jornen BG-80 model features a perforated drum, full stainless steel housing, and touchscreen HMI, commonly used in GMP-...
- Trusted Seller
2007 Kaeser TD 61
- Manufacturer: Kaeser
- Model: TD 61
Used Kaeser TD 61 Refrigerant Compressed Air Dryer, 2007: – 3 Ph – 60Hz
$3,900 USDChicago, IL - Trusted Seller

Rotary R1070
- Manufacturer: Rotary
Specs Dimensions: Length: 36 in (91 cm) x Width: 24 in (61 cm) x Height: 54 in (137 cm) (cabinet + monitor stand) Installed Options Battery charging docks for sensors Steering wheel and brake pedal lock kit Color...
- Trusted Seller
2018 Admet EXP-140128-17
- Manufacturer: Admet
490kN (110,000 LB) Tension Other Stroke Lengths Are Optional 4 in/min at forces up to 600kN – Controlled speed for high-force pressing operations

Van Dorn Demag 300RS30F Injection Molding
- Manufacturer: Van Dorn Demag
- Model: 300RS30F
Good condition Van Dorn Demag 300RS30F Injection Moldings manufactured in 1991. Located in USA and other countries. Click request price for more information.
USA
