Used processing machines in Emilia-Romagna, Italy

VER5448 – Forming Section and Press Section 2400 mm

Complete Forming Section (Headbox and Fourdrinier) and Press Section for a Paper Machine 2400 mm at pope Bi Nip with rolls diam. 470 y 700 mm., 45 and 120 kN/m Central Suction Press diam. 900 mm Shoe Press: Maker...

VER5015 – Forming Section: Top Wire

Fourdrinier (bottom layer) – NOW SOLD Fourdrinier (top layer) – Now dismantled, well kept inside Wire section having the following main characteristics: •designed, manufactured and installed by Metso •in cantilev...

VER5344 – 1950 mm Freiria Headbox

• Manufacturer: Freiria

Headbox Slice width: 1950 mm | Flow rate: 7000 l/min

VER5116 – 2950 mm Thiry Headbox

• Manufacturer: Thiry

Slice width: 2950 mm | Grammage: 90 gsm | Dilution: 7 g/l

1971 VER3242 – 2350 mm Freiria Pressurized Headbox

2 All stainless steel Capacity: min 1800 – max 10000 lt/min | Dismantled: 2006 | Operating speed: 400 m/min | Basis weight range: 80 – 300 gr/m

VER4372 – 3050 mm Neyrpic Headbox

Hydraulic headbox All parts in contact with pulp are in stainless steel Production: 20 gr/m 2 at 400 m/min 36 gr/m 2 at 320 m/min 90 gr/m 2 at 150 m/min Lateral pulp feeder Stainless steel upper and lower slices ...

VER5152 – N° 2 Beloit Press Frames

• Manufacturer: Beloit

VER5442 – 2800 MM VOITH HEADBOX

• Manufacturer: Voith

two ply hydraulic headbox with single dividing lamella ) Slice opening via hydraulic motor driving screen jacks.

VER5434 – 2800 MM CARCANO HEADBOX

Manufacturer: CARCANO С » Capacity max.: 28.000 lpm | Consistency: 0,8 – 1,4 % | Slice width: 2.800 mm | Product: fluting, liner | Trimmed width: 2 550 mm

VER5057 – 2950 mm Comer Headbox

• Manufacturer: Comer

For Fluting/Medium Pond width: 2950 mm | Max design speed: 450 m/min | Flow rate (min-max): 7200-17200 l/min | Consistency: 0,6-1,1% | Grammage: 100-270 gsm

1974 VER5178 – Headbox

• Manufacturer: Carcano

VER4411 – 3200 mm x 2 Blind Drilled Presses

One with bearings and bearings holders Cover to be remade

VER4418 – 4460 mm Ventanip Press Roll

Ventanip Press Roll Face: 4460 mm | Diameter: 650 mm

VER5449 – 3400 mm Pope reeler

• Manufacturer: Valmet

Hydraulic Pope Reeler If needed, it is possible to cut it to a narrower width.

VER5296 – N°8 x Dryer Cylinders, face 2950 mm, diameter 1500 mm

N° 8 dryer cylinders Now dismantled, in very good condition