Processing » Papermaking » Emilia-Romagna

Building Filters

162

Used processing machines in Emilia-Romagna, Italy

  • Trusted Seller
    104" (2.65M) TISSUE MACHINE 20

    104" (2.65M) TISSUE MACHINE 20 - 30 TPD (2) CONFIGURATIONS

    • Manufacturer: TISSUE

    109244 One (1) used 104" (2.65M) wide Tissue machine Solá Industrias Mecánicas Year: 2000 Capacity: 20-30 TPD (from 15 to 32 GSM) Width: 2650 mm Speed: 500 m/min IMPORTANT: this tissue machine can have two config...

    Ravenna, Italy
  • VER5369 – Bags making machine

    VER5369 – Bags making machine

    • Manufacturer: Windmuller

    Bags making machine Bags sizes that can be produced: -base 8, height 10, N° 0 -base 10, height 24, N° 1 -base 12 height 26,5, N° 3 -base 15 height 30, N° 3 -base 18 height 39, N° 5

    Ravenna, Italy
  • VER5038 – 1700 mm Paper

    VER5038 – 1700 mm Paper Machine

      The machine was making light coloured board for files Machine still installed, idled Complete with stock preparation, rewinder, all auxiliary plants and all ancillary equipment

      Ravenna, Italy
    • VER4861 – 5600 mm Paper

      VER4861 – 5600 mm Paper Machine

        Newsprint Paper Machine, easily convertible to make packaging papers, sack kraft, kraft liner, fluting, etc.. Year of installation and start up: 1980 Left Hand Drive

        Ravenna, Italy
      • VER4667 – 2900 mm Board

        VER4667 – 2900 mm Board Machine

          Installed in the ’60s Completely renewed in 1992 (replaced the side parts of the wet section, totally rebuilt the hood of the drying section, and added 6 dryer cylinders) Hood by Valmet Bono boiler 12 t/h, 10 bar...

          Ravenna, Italy
        • VER5461 – 2450 mm Paper

          VER5461 – 2450 mm Paper Machine

            Complete Paper Production Plant for MG paper for bags and packaging grades Comer fully automatic Headbox 18.000 lpm, pc controlled for profile control, with very recent profile controls Tasowheel Fourdrinier 10 m...

            Ravenna, Italy
          • VER4226 – 3700 mm Paper

            VER4226 – 3700 mm Paper Machine

              Trimmed width: 3700 mm Weight range: 45 -150 gr/m 2 Speed: 600 m/min Production capacity: 130 Tpd Fan pump 4050 mm output pressurized headbox made by Valmet, installed in 1995, 150 Tpd Fourdriner made in 1992, in...

              Ravenna, Italy
            • VER4429 – 5600 mm Paper

              VER4429 – 5600 mm Paper Machine

              • Manufacturer: Beloit Walmsley

              Deckle width at pope reel: 5600 mm | Year of machine start up: 1976 | Operating speed: 700 – 1000 m/min | Basis weight range: 46 – 120 gsm, 80 standard | Balance speed: 1100 m/min | Paper grades: originally news...

              Ravenna, Italy
            • 1979 VER4890 – 2590 mm

              1979 VER4890 – 2590 mm Board Machine

                9 forming cylinders (face: 2800 mm, diameter: 1250 mm) N° 26 Dryers (diameter 1500 mm) MG Cylinder (diameter 3500 mm) Hood by Brunnschweiler 5/6 pope spools Machine can work with pope winder or bypass the pope an...

                Ravenna, Italy
              • 1982 VER4975 – Envelope Making

                1982 VER4975 – Envelope Making Machine

                  1 color inside 2 colors outside Window Outside side seams

                  Ravenna, Italy
                • VER4294 – Laminating machine

                  VER4294 – Laminating machine

                  • Manufacturer: Manzoni, 1992

                  2 unwind stands for paper rolls 2 unwind stands for P.E. rolls 2 x four colors printing units 2 x gluing units Final sheet cutter The machine is composed by 2 printing and laminating units, with one sheet cutter ...

                  Ravenna, Italy
                • VER5157 – 2540 mm Paper

                  VER5157 – 2540 mm Paper Machine for Fluting

                    Including complete Stock Preparation (pulpers, refiners, separators, vibrating screen, deflaker, several pumps and agitators, etc..) Machine composed of: -forming section: fourdrinier. Headbox by Over (slice widt...

                    Ravenna, Italy
                  • VER5439 – Small Tissue Machine

                    VER5439 – Small Tissue Machine 1650 mm

                    • Manufacturer: Beloit

                    Year of construction 1987 Grammage 17 to 38 GSM Description: Waste paper Stockpreparation line: Horizontal pulper Papcel type HV 25 (25 m3 chest volume), reject handling by Poire Papcel PSN 30 Pressurized Headbox...

                    Ravenna, Italy
                  • VER4983 – 2800 mm Thickboard

                    VER4983 – 2800 mm Thickboard Machine – now dismantled

                    • Manufacturer: Coincart

                    N°2 mould formers Collecting drum with press and exit conveyor belt Now dismantled, complete

                    Ravenna, Italy
                  • VER5372 – 2960 mm Paper

                    VER5372 – 2960 mm Paper Machine for packaging papers

                      Paper Machine for packaging papers (fluting/liner) already sold Very recent drive and electrical panels

                      Ravenna, Italy
                    12345

                    Overview

                    Papermaking machinery is essential for the production of paper products from raw materials like wood pulp, recycled paper, and other fibers. This category includes equipment for pulping, refining, forming, pressing, drying, and finishing paper. These machines are vital for industries ranging from stationery to packaging and publishing.

                    FAQ

                    What should I consider when buying used papermaking machinery?

                    Consider the machine's age, operational hours, maintenance history, and any upgrades or refurbishments. Ensure the machinery meets your production requirements and complies with safety standards.

                    How do I ensure the papermaking machinery is shipped safely?

                    Use a specialized transport service for heavy machinery. The machinery should be securely packed and protected to prevent damage during transit.

                    What is the maintenance schedule for papermaking machinery?

                    Regular maintenance includes checking and replacing worn parts, lubricating moving components, and ensuring all systems are functioning correctly. Consult the manufacturer's manual for specific maintenance intervals and procedures.