Processing » Emilia-Romagna

Search By Category

Search By Manufacturer

Building Filters

1050

Used processing machines in Emilia-Romagna, Italy

  • VER4759 – Fourdrinier Elements for

    VER4759 – Fourdrinier Elements for a 2700-3000 mm machine

      1 Forming Board 1 Vacum Foil 11 Adjustable Angle Single foils with ceramic cover 2 Delta foils 3 Vacuum for Trivac 2 Supports for foils 3 Supports for vacuum foils 2 Boxes for Trivac 1 Vacuum foil 4 Johnson autov...

      Ravenna, Italy
    • VER5218 – Parts of a

      VER5218 – Parts of a 1600 mm Writing/Printing Paper Machine for specialty papers

        Parts of a 300/400 m/min writing/printing Paper Machine for Specialty Papers (60 Tpd) Some stock preparation machines Headbox by Freiria, slice width 1800 mm, flow rate: 12.000 l/min, Fourdrinier with cantilever,...

        Ravenna, Italy
      • VER5246 – 2800 mm Hunt

        VER5246 – 2800 mm Hunt & Moscrop soft calender

        • Manufacturer: Hunt & Moscrop

        Soft calander With several spare rolls With temperature control Electrical control panel in perfect working condition It has been in operation for 15 years

        Ravenna, Italy
      • VER4876 – 2900 mm Wet

        VER4876 – 2900 mm Wet Press

        • Manufacturer: Toscotec

        Blind Drilled High Performance Cover: SolarPress (cover thickness: 20 mm) with frames and two spare rolls Machine available from April 2018 It was installed in a 300 tpd machine running at 600 m/min, making 2600 ...

        Ravenna, Italy
      • VER5297 – 3000 mm Headbox

        VER5297 – 3000 mm Headbox

        • Manufacturer: VAS (good Italian maker)

        Headbox Disinstalled in October 2023 when it was perfectly working (the mill has changed it with a new one, in order to increase the production) Also available the foil boxes (same size) that were installed toget...

        Ravenna, Italy
      • VER5238 – N.7 X 2900

        VER5238 – N.7 X 2900 mm Forming Cylinders

          N.7 forming cylinders For a 2900 mm wide machine Diameter: 1250 mm

          Ravenna, Italy
        • VER4883 – Pope Spools

          VER4883 – Pope Spools

            Pope Spools for Tissue Machine to hold board cores Without bearings See below drawings for all the measures

            Ravenna, Italy
          • VER5448 – Forming Section and

            VER5448 – Forming Section and Press Section 2400 mm

              Complete Forming Section (Headbox and Fourdrinier) and Press Section for a Paper Machine 2400 mm at pope Bi Nip with rolls diam. 470 y 700 mm., 45 and 120 kN/m Central Suction Press diam. 900 mm Shoe Press: Maker...

              Ravenna, Italy
            • VER5344 – 1950 mm Freiria

              VER5344 – 1950 mm Freiria Headbox

              • Manufacturer: Freiria

              Headbox Slice width: 1950 mm | Flow rate: 7000 l/min

              Ravenna, Italy
            • VER5116 – 2950 mm Thiry

              VER5116 – 2950 mm Thiry Headbox

              • Manufacturer: Thiry

              Slice width: 2950 mm | Grammage: 90 gsm | Dilution: 7 g/l

              Ravenna, Italy
            • 1971 VER3242 – 2350 mm

              1971 VER3242 – 2350 mm Freiria Pressurized Headbox

                2 All stainless steel Capacity: min 1800 – max 10000 lt/min | Dismantled: 2006 | Operating speed: 400 m/min | Basis weight range: 80 – 300 gr/m

                Ravenna, Italy
              • VER4372 – 3050 mm Neyrpic

                VER4372 – 3050 mm Neyrpic Headbox

                  Hydraulic headbox All parts in contact with pulp are in stainless steel Production: 20 gr/m 2 at 400 m/min 36 gr/m 2 at 320 m/min 90 gr/m 2 at 150 m/min Lateral pulp feeder Stainless steel upper and lower slices ...

                  Ravenna, Italy
                • VER5152 – N° 2 Beloit

                  VER5152 – N° 2 Beloit Press Frames

                  • Manufacturer: Beloit

                  Ravenna, Italy
                • VER5442 – 2800 MM VOITH

                  VER5442 – 2800 MM VOITH HEADBOX

                  • Manufacturer: Voith

                  two ply hydraulic headbox with single dividing lamella ) Slice opening via hydraulic motor driving screen jacks.

                  Ravenna, Italy
                • VER5434 – 2800 MM CARCANO

                  VER5434 – 2800 MM CARCANO HEADBOX

                    Manufacturer: CARCANO С » Capacity max.: 28.000 lpm | Consistency: 0,8 – 1,4 % | Slice width: 2.800 mm | Product: fluting, liner | Trimmed width: 2 550 mm

                    Ravenna, Italy
                  3940414243

                  Overview

                  Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

                  FAQ

                  What should I consider when buying used processing equipment?

                  Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

                  How do I arrange shipping for processing equipment?

                  Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

                  What is the typical maintenance for processing equipment?

                  Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.