Used valve in Belgium

Valve Bank

Valve Bank with 4 VDL Klima Shell and Tube Heat Exchangers, 38 SPX Valve Control Units, 5 Endress + Hauser Flow Meters, 4 SPX Pump Units and Associated Pipework.(V 13/14)

Valve Bank

Valve Bank With 2 Endress + Hauser Promag 300 Flow Meters(C4)

Exhauster, 58 m³/min, 600 daPa, 11 kW

• Manufacturer: Dapa

Type: RVR/S 06/58-30, serial number: 49362 Year of construction: 1981, weight: ± 800kg Motor LEROY SOMER, 11 kW, 380/660 V, 3000 rpm Performance by 20°C + density P 1,2 kg/m³ Inlet ø 250mm, outlet ø 210mm Drive 4...

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Sand feeder FAT, 1000 l, CE

Input Ø 275 mm; exit Ø 110 mm With 2 sensors and pneumatic valve Closing by cone on the input side, with manuel valve With control box With declaration of conformity CE

2009 Pneumatic sand feeder NEUHOF, with CE type plate, 150 l

Type: PDGF150, serial number: 271 With compressed air-fluidizing base inside With height-adjustable feet With level sensor on the top With pneumatic vent valve and overpressure valve

1991 Feeding skip 900 l, 5 t, LEW

• Manufacturer: HANS BEIMLER HENNINGSDORF

Type: BK 10/1.6, serial number: 2620 New, never used The opening from the valve is regulated by the crane If the valve is unlocked, you can open it slowly with the crane

Sand conveyor 350 l, OFFICINE

Year of construction: 1996, Weight : ± 250 kg Konus in good condition With switch panel With pneumatic control valves Ø entry 250mm, Ø exit 90mm With pressure control valve, with additional accelerator at the exit

1998 GEA VT20 L00IN

• Manufacturer: GEA

GEA VT 20 LOC IN Heat Exchanger Heat Exchanger , 3 Valves and Associated Pipework(C4 )

Heat Exchanger Skid

Heat Exchanger/ Manifold and Valve Skids with 6 Assorted Motors, Insulated Tank and Associated Pipework(C4)

Gestra Turbidity Detector

• Manufacturer: Gestra

Gestra Turbidity Detector Contains 2x Grundfoss pump units Stainless steel holding tank Gestra flow valves

CIP Manifold

Stainless Steel CIP Manifold with Enress + Hauser Promag 50 Flow Meter Valves and Associated Pipework(H7)

1996 GEA VT20 LCIN

• Manufacturer: GEA

GEA VT 20 LOC IN Heat Exchanger Heat Exchanger with XPS Pump, 3 Valves and Associated Pipework(C4)

Small sandhopper, ± 1 m³

On 4 feet with overpressure valve Weight: ± 400 kg | Outside dimensions: 1530 mm x 1130 mm, h. 3500 mm | Useful dimensions: 1250 mm x 850 mm, 1450 mm | Outlet height above the ground: ± 1900 mm