Used valve in Wallonia, Belgium

Exhauster, 58 m³/min, 600 daPa, 11 kW

• Manufacturer: Dapa

Type: RVR/S 06/58-30, serial number: 49362 Year of construction: 1981, weight: ± 800kg Motor LEROY SOMER, 11 kW, 380/660 V, 3000 rpm Performance by 20°C + density P 1,2 kg/m³ Inlet ø 250mm, outlet ø 210mm Drive 4...

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

2009 Pneumatic sand feeder NEUHOF, with CE type plate, 150 l

Type: PDGF150, serial number: 271 With compressed air-fluidizing base inside With height-adjustable feet With level sensor on the top With pneumatic vent valve and overpressure valve

Sand feeder FAT, 1000 l, CE

Input Ø 275 mm; exit Ø 110 mm With 2 sensors and pneumatic valve Closing by cone on the input side, with manuel valve With control box With declaration of conformity CE

1991 Feeding skip 900 l, 5 t, LEW

• Manufacturer: HANS BEIMLER HENNINGSDORF

Type: BK 10/1.6, serial number: 2620 New, never used The opening from the valve is regulated by the crane If the valve is unlocked, you can open it slowly with the crane

Sand conveyor 350 l, OFFICINE

Year of construction: 1996, Weight : ± 250 kg Konus in good condition With switch panel With pneumatic control valves Ø entry 250mm, Ø exit 90mm With pressure control valve, with additional accelerator at the exit

Small sandhopper, ± 1 m³

On 4 feet with overpressure valve Weight: ± 400 kg | Outside dimensions: 1530 mm x 1130 mm, h. 3500 mm | Useful dimensions: 1250 mm x 850 mm, 1450 mm | Outlet height above the ground: ± 1900 mm

Plate heat exchanger FUNKE

• Manufacturer: Funke

With 2 quick couplings and ball valves Weight: ± 400 kg | Dimensions: length /850 mm, width 310 mm, height 340 mm | Maximum pressure: 10 bar

Sand conveyor STEIN 125 l

Type: SAP-PL, serial number: 148-1082 Year of construction: 1982, Weight: ± 180 kg Input 220 x 220 mm Exit Ø 80mm Pressure max 6 bar With pneumatic valve on the inlet With pressure control equipment With sensor W...

Gassing unit LAEMPE - LG15 CB

• Manufacturer: Laempe / Röperwerk

With display for operating pressure, flushing pressure and operating pressure valves

1978 Pressurized air tank vertical 1000 l, FLÖTTMANNWERKE

In good condition 120 °C, 8 bar On 3 feet With pressure valve and manometer

Sand blast vessel, ± 75 l

• Manufacturer: SERBATO / LOSOLA

With pneumatic inletvalve With measuring head "full" With pressure relief valve With fill funnel

Pneumatic dust colletor ± 65 l

Pneumatic dust feeder conveyer in spherical shape With pneumatic valve flap

Sand silo, +/- 65 m³ = 90 t

With level sensor on the roof and manhole with overpressure valve Without: ladder, balustrade, filter, discharge flap, filling tube