Used Machine Tools in Gelderland, Netherlands

Okuma - MA-600 HB SPACE CENTER

• Manufacturer: Okuma
• Model: MA-600HB

Chain ATC 200 Positions 3D Measuring probe Tool monitoring device Double chuck conveyor Double sleeve spindle cooling Under power in Germany Good maintained machine Feed rate 60.000 Rpm all axis Dust collector in...

Henninger - ZS-201

Self centerring device Double column slide ways Dressing Unit Tailstock by rack & pinion Eccentric adjustment 0 - 20 mm Large Cone-Stone tooling package

MICROCUT - V-30

• Manufacturer: Microcut
• Model: V30

Spindle hours 1980 H Tool included HeidenHain Measuring probe Chip conveyor & Coolant tank

ANAYAK - HVM 11000

• Manufacturer: Anayak

X-axis: 10300 mm | Y-axis: 2000 mm | Z-axis: 1800 mm | Table length: 12000 mm | Table width: 1650 mm | Table load: 50000 | Power on spindle: 22/30 kW | Spindle speeds: 60-3000 Rpm | Spindle taper: 50 ISO...

Lagun Goratu - GBM CM5

• Manufacturer: Geminis

X-axis: 5000 mm | Y-axis: 1200 mm | Z-axis: 2000 mm | Table length: 6500 mm | Table width: 1100 mm | Table load: 6000 | Power on spindle: 37 kW | Spindle speeds: 4000 Rpm | Spindle taper: 50 ISO/Bt/Mk | ...

DECKEL MAHO - DMC65 H duoBLOCK

• Manufacturer: Deckel / Maho
• Model: DMC 65 H

4 Axis Controlled simultenious New WEISS spindle in 2022 New Window SG Glass BLUM laser measuring Renishaw 3D Measuring taster Filtration and coolant system 600 Liter and 40 bar

ZAYER - KARIOS 10000

• Manufacturer: Zayer

Chain tool changer with 40 Positions CNC Rotary Table 2300 x 2300 x 40 ton ? IKZ 20 Bar internal cooling Chip conveyor on full length Zayer 45 Head with 40 kW Indexing head at 0.001 Degrees Very little used

ANAYAK - HVM 5000 DUO

• Manufacturer: Anayak
• Model: HVM 5000

Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation ...

Strands - S68 - Pillar drilling machine

• Manufacturer: Strands

Strands - S68 - Pillar drilling machine

DOOSAN - MV 8035

• Manufacturer: Doosan
• Model: MV8035

Rigid construction for Heavy Duty jobs Direct drive powerful processing in 2 stage gear drive Fully covered machine Distance spindle nose - table top 200 - 1000 mm Distance spindle nose - to column 1005 mm Ex. Ho...

KUNZMANN - WF7/3

• Manufacturer: Kunzmann

X-axis: 600 mm | Y-axis: 400 mm | Z-axis: 400 mm | Table length: 650 mm | Table width: 400 mm | Table load: 250 | Stroke pinole: 40 mm | Length: 2800 mm | Width: 2400 mm | Height: 2100 mm | Weight: 2000...

DECKEL MAHO - DMU80P

• Manufacturer: Deckel / Maho
• Model: DMU 80 P

Production package equipped with: 600 L Filtration system IKZ Form AD Rotation screen MP10 measuring probe in 2023 new spindel cost 13.500 EUR

MAZAK - VTC 200B-II

• Manufacturer: Mazak
• Model: VTC 200B II

Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included

MAZAK - VTC 300C-II

• Manufacturer: Mazak
• Model: VTC 300C

IKZ 15 BAar Measuring probe MP12 Bohrzyklus with torq depending Performance package Pendel screen Interface set

Matsuura - LX-O

• Manufacturer: Matsuura

X - travel: 330 mm | Y - travel: 300 mm | Z - travel: 250 mm | Table length: 540 mm | Table width: 320 mm | Table load: 100 | Feed rate x-axis: 90000 mm/min. | Feed rate y-axis: 90000 mm/min. | Feed rate ...