Used Milling Machines in Gelderland, Netherlands

MIBA - NC-Milling Machine

Z Axis 1100 mm X Axis 1310 mm C Axsi Endles Working range stage 1: 4000 - 8500 mm Working range stage 2: 4000 - 11.500 mm

Deckel - FP3A - Milling machine

• Manufacturer: Deckel / Maho
• Model: FP 3

The Lid FP-3A milling machine is in very neat condition and complete as can be seen in the photos. The machine is immediately ready for use. Equipped with an SK40 holder, table dimensions of 700 x 460 mm, T-slot ...

2007 Knuth Eco-Mill 450

• Manufacturer: Knuth Werkzeugmaschinen

Type digital readout: Siemens | Number of axes: 3 | Travel x [mm]: 450 | Travel y [mm]: 300 | Travel z [mm]: 400 | Spindle speed min. [rpm]: 100 | Spindle speed max. [rpm]: 8000 | Recording: ISO40 | Table size l...

ANAYAK - HVM 5000 DUO

• Manufacturer: Anayak
• Model: HVM 5000

Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation ...

ANAYAK - HVM 11000 DUO

• Manufacturer: Anayak

Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation ...

SORALUCE - FP 14000

• Manufacturer: Soraluce

FP Model ideal for variety of application Medium-Large size Components Floor type milling boring machine High dynamics with speeds of 35M/Min INA linear guiding system Hydro mechanical clamping slides Orthogonal ...

SORALUCE - FS 8000

• Manufacturer: Soraluce

ATC Chain 40 positons Max. tool size Ø 125 x 400 mm Machine prepared for rotary table Chip conveyor Central lubrication Stroke with vertical head rotated 3300 mm

EUROMILL - FUS 32

Fixed table 950 x 450 mm Feeds all direction ISO-40 and 3kW 3 Axis Digital Read Out Systsem CE-Safety Coolant system with semi closed lower base

JAEGER - SK4

Seperate coolant and frequency converter Last service & Test Log in 2018 Run out in 1 uM

ZAYER - 30 KCU 10000

• Model: 30 KCU 10000

New HeidenHain iTNC530 controller in 2015 New bearing in head September 2025 X/Y/Z Linear measuring system IKZ 15 Bar High pressure coolant Central lubrication Optional 2 x floorplates 6000 x 1250 x 245 mm #9240 ...

CME - MH-700

Chip conveyor High preessure coolant 25 Bar ATC chain 60 posiions Optional Magnet table clamping system Auto index head 1 Gr.

Ki-Heung - KNC 1000

X-axis: 3200 mm | Y-axis: 1200 mm | Z-axis: 1600 mm | Table length: 3500 mm | Table width: 1000 mm | Table load: 8000 | Power on spindle: 37 kW | Spindle speeds: 3000 Rpm | Spindle taper: Sk50 ISO/Bt/Mk ...

ANAYAK - HVM 5000

• Manufacturer: Anayak
• Model: HVM 5000

X-axis: 4300 mm | Y-axis: 1200 mm | Z-axis: 1460 mm | Table length: 5000 mm | Table width: 1065 mm | Table load: 20000 | Power on spindle: 22/30 kW | Spindle speeds: 60 - 3000 Rpm | Spindle taper: Bt 50 ...

SORALUCE - TL-25

• Model: TL 25

Aiptek ATC 30 positions Automatic head 2.5 x 2.5 Gr Central lubrication Machine housing with front doors Large tool package

ANAYAK - HVM 3800

Chip conveyor Double doors front side Chain Tool chnager 30 positions Central lubrication IKZ 16 Bar and 2,2 kW Flow 16L/Min Tool blocking power 1968 daN Full set books and 1e owner machine